Let’s see how you are mounting your LRF/Spotters together

[mrtoyz]

looking for a mount for an LRF and spotter on a tripod. Love to see what people are using.
RRS has a couple solutions:
https://soar.reallyrightstuff.com/fas-dm

as well as this one. Looks new but no pics yet
https://soar.reallyrightstuff.com/CLII-Dual-Mount

 

[wigwamitus]

Probably not exactly what you had in mind, but technically in scope. Nighthunters use spotters and LRFs also !

The RRS stuff looks interesting !

 

[_Windrider_]

Check out www.themub.com. Or the optics hub https://kineticdg.com/product/the-optics-hub/

 

[seansmd]

Binos go in the swaro post on the right slot, the leica lrf in that holder on the left. I just got a 3d printed lrf holder I haven't tried yet.

 

[Eostech]

https://store.ashburyprecisionordnance.com/search?txt=Electro-Optic Rail Mount

http://www.snipershide.com/shooting/threads/spotting-scope-mounting-solutions.123325/

 

[mrtoyz]

View attachment 7174843
Binos go in the swaro post on the right slot, the leica lrf in that holder on the left. I just got a 3d printed lrf holder I haven't tried yet.

Who’s table is this?

 

[AIAW]

I have a similar setup to what one shot ST has, except a PLRF25 instead of the Vector 21. The APO CLRF/LRTI is a must in my opinion if co-witnessing them.

https://www.snipershide.com/shooting/threads/spotter-lrf-combo.208077/

 

[_Windrider_]

Who’s table is this?

I believe that’s the abel table

 

[Hollywood 6mm]

Who’s table is this?

I believe that’s the abel table

It's a Gray Ops AMP Elite plate.

 

[seansmd]

Gray ops.

 

[Alpine 338]

Leupold Mk4 in a KDG Optics Hub attached via 1/4" screws to the A-D Precision PSP Ultra (Precision Shooting Platform). The Terrapin is attached via RRS LC-SC clamp, and attached to the platform. The spotter is adjustable up/down via set screws in the optics Hub, and the LRF is adjustable left/right via the clamp attachment. Leupold DeltaPoint is attached via Picatinny rail to the optics hub, and has its own adjustments. So everything is co-aligned to 2000-yards.

Link -

Precision Shooting Platform (PSP) – A-D Precision

Precision Shooting Platform Tactical Table - Bison Tactical

Buy your Precision Shooting Platform, tripod shooting rest from Bison Tactical. Ultra-Light, Super Strong, Awesomely durable, and made in Colorado USA.

www.bisontactical.com

 

[leftyk82]

Abel Table with RRS clamps, middle for bino’s, side for range finder

 

[hic28]

This is the able table, there are tons of configurations you can do to make it do what you need

 

[Alpine 338]

View attachment 7174939

This is the able table, there are tons of configurations you can do to make it do what you need

View attachment 7174942
View attachment 7174943

I see that you where at Q-Creek ELR match also.

 

[Sheldon N]

RRS BC-18 Ballhead for rangefinder, screwed into a Hejnar 6" bar with anti-twist plate, with outdoorsmans tall mount for the binos.

 

[hic28]

I see that you where at Q-Creek ELR match also.

Top pic was 2019 - bottom rain pic was 2018. I’ll be there 2020 also hopefully.

 

[mrtoyz]

Calling Michael, @MPHReallyRightStuff, have any photos of the CL2 Mount you can share??

looks like this is it

 

[StrayDog]

Liking the Abel table.

 

[MPHReallyRightStuff]

@mrtoyz yeah that’s it. Trying to get new pictures up for more items soon. Thanks for the mention. I like our setups for dual mounts of course.

 

[AIAW]

Jorge over there lazing the moon with that Vector 21 ?

View attachment 7174942

 

[NoLegs24]

Jorge over there lazing the moon with that Vector 21 ?

Nah, just 13.5k yards.....

 

[acudaowner]

have not yet purchased this but for 180. its not the cheapest thing I have seen nor the most expensive
http://panhandleprecision.com/rlc-customs-r-f-cam-cradle-review/ definatly not the neat aluminum or stainless which ever it was made from diy version I saw in this forumthat someone made either but it should do .

 

[mrtoyz]

Love to hear thoughts/opinions about a Table VS a rail like the RRS CL2 above.

 

[Cjwise5]

RRS BC-18 Ballhead for rangefinder, screwed into a Hejnar 6" bar with anti-twist plate, with outdoorsmans tall mount for the binos.

View attachment 7174948

Tell me more about this swaro bino mount. I've been looking for something better/taller than the original Swarovski one. where do I find it? cost? etc.

 

[mrtoyz]

Tell me more about this swaro bino mount. I've been looking for something better/taller than the original Swarovski one. where do I find it? cost? etc.

Here’s the mount
Outdoorsman Bino Mount

 

[Dthomas3523]

Also running a gray ops with an RRS micro ballhead for ranger.

 

[Austaz]

Swarovski str 80, Leica rangefinder and sig Romeo to help out as the Swarovski has a little too much zoom for finding targets.

can align all three pretty well.

 

[seansmd]

Also Leica and swaro on the Gray Ops, need a ball head for the lrf.

 

[Sheldon N]

Tell me more about this swaro bino mount. I've been looking for something better/taller than the original Swarovski one. where do I find it? cost? etc.

Yes, the outdoorsmans Mount is much improved over the Swaro mount.

 

[308ftWIN]

Here was another thread. My post is linked for a budget option. https://www.snipershide.com/shootin...r-to-run-spotter-lrf-etc.6937253/post-7867268

 

[ZiaHunter]

Spotter 60 with LRF.

 

[gits]

The Mod Dos by The Multiuse Block works pretty well for configuring multiple options using MLOK attachments and 1/4x20 Screws.

 

[Alpine 338]

What are the deminsions of that MOD DOS? No data on the their website.

 

[NoLegs24]

Used to rock an RRS cinema rail, but I made the mistake and ordered one too long. My buddy makes the Abel Table, so I was using their setup for a while. Still have it. Tried the Gray Ops for a short stint, preferred the Abel Table over it.
And now I’m running an RRS Multi-Purpose Rails cause it’s compact, which is near the same as cinema rails.

Have the dual RRS SC-LR for the spotter and I co-witness the Vectors using the RRS BC-18 Micro Ball

 

[Rover31]

Amazon parts

 

[Bigrederic]

I would like to mount my Razor 4000 to the side of my KDG optics hub... but I haven't found a solid solution yet.

 

[kedbeck]

Need a micro ballhead for the LRF. Then I'm all set.

 

[danatkins]

View attachment 7178853Amazon parts

Got a parts list?

 

[Rover31]

@danatkins mine is similar to this but was 1/3 the price, unfortunately says it’s no longer available.

 

[Ordnance Locker]

What are the deminsions of that MOD DOS? No data on the their website.

Roughly 9" x 3 7/16" x 7/16" (minus the 1/8" that the mounting plate sticks out).

 

[mrtoyz]

Fully expecting to get flamed for this but wtf

The internet puked all over my tripod!
As crazy as it may look, it’s actually very functional. Gotta look closely to see all the shit hangin off.

 

[6gunner]

I have the RRS Cinema rail and 2 Leofoto micro clamps.

 

[hic28]

 

[Devildog]

 

[LC 6.5 Shooter]

View attachment 7192744

where can I get that rangefinder mount

 

[todd]

Looking for a tripod adapter for the Sig KILO1800BDX LRF, the Sig KILO2000 tripod adapter I bought has different dimensions at the bottom than the 1800 (1800 has flat sides, the 2000 sleeve has a taper and is almost 1/4" smaller at the bottom) and won't fit.

Does anyone have an 1800 with a workable tripod adapter solution? So far nothing seems to be the right size.

 

[cmickles]

What type of tripods are you guys using?

 

[Hollywood 6mm]

What type of tripods are you guys using?

Really Right Stuff TFC-33.

 

[mrtoyz]

What type of tripods are you guys using?

RRS 34’s

 

[Alpine 338]

While most people like, or would like to own RRS tripods, which are really good kit. I personally prefer Manfroto because they use lever locks. RRS uses twist locks.