Leupold Mark4 M3 10X LR/T

DuneBoer

Apocalypse Now!
Full Member
Minuteman
  • Jan 16, 2012
    4,427
    14,643
    State of Jefferson
    Put this on a Rem 700P. I have the bullet drop ring for the 190 SMK. So, my stupid question is this. After I am zeroed at 100, I back off the Allen screw and reset it to 100. Where is the mark for 100? It reads 2X100 YDS but no 100. Under the 2 is a click and about 5 before it. I bought this thing used no instructions looked on Leupolds site and got the manual etc. but nothin on these ballistic rings.

    Do I zero at 200? What are those clicks before 200 for?

    Please help.
     
    Leupold M3 Knobs 190gr. 300WM Drops are as follows: So yes you zero at 200, with this dial. Each click is 1 moa elevation .5 moa windage. You may want to give Leupold a ring @ 1-800-538-7653
    200yd. Zero
    300yd. - 2moa
    400yd. - 5moa
    500yd. - 7moa
    600yd. - 11moa
    700yd. - 14moa
    800yd. - 18moa
    900yd. - 23moa
    1000yd. - 27moa
    1100yd. - 34moa
    1200yd. - 40moa
    1300yd. - 47moa

    This article may help: Scopes: Leupold
     
    Leupold M3 Knobs 190gr. 300WM Drops are as follows: So yes you zero at 200, with this dial. Each click is 1 moa elevation .5 moa windage. You may want to give Leupold a ring @ 1-800-538-7653
    200yd. Zero
    300yd. - 2moa
    400yd. - 5moa
    500yd. - 7moa
    600yd. - 11moa
    700yd. - 14moa
    800yd. - 18moa
    900yd. - 23moa
    1000yd. - 27moa
    1100yd. - 34moa
    1200yd. - 40moa
    1300yd. - 47moa

    This article may help: Scopes: Leupold

    Bob,

    Thanks a bunch! I was starting to scratch a hole in my head.