Does anyone have any experience with these rings? I have my deer gun set up with them and the plates that attach the rings to the rail cracked. Leupold sent me a new pair of plates however these ones are showing signs of failure as well. These rings were torqued to manufacturers spec using a precision instruments torque wrench. My set up is as follows, Rem 700sps tac .308, Weaver picatinny one piece aluminium rail, Leupold PRW 1 inch low rings. Iam thinking of swapping out the picatinny rail to an offering from another manufacturer, maybe this one is a different spec. Thanks in advance for opinions & advise as I am still relatively new to the tactical set ups.
Leupold PRW scope rings
- Thread starter DesertFox3088
- Start date
Re: Leupold PRW scope rings
I have seen that before as well..
Take them off, and buy yourself a set of Mark 4, NF, Seekins, Badger .
Any of these are good choices, and can be found pre-owned on the forum
here for a good savings.
I have seen that before as well..
Take them off, and buy yourself a set of Mark 4, NF, Seekins, Badger .
Any of these are good choices, and can be found pre-owned on the forum
here for a good savings.
Re: Leupold PRW scope rings
Wonder how wide the weaver base is, I run PRW with a MK4 base and they fit very well. The MK4 measures .830 at the widest part of the rail.
Wonder how wide the weaver base is, I run PRW with a MK4 base and they fit very well. The MK4 measures .830 at the widest part of the rail.
Re: Leupold PRW scope rings
i personally would rather own anything but leopold stuff,yaya i know what all you guys will say but ive never had anything but problems with there stuff,mounts ,rings ,goldenring optics, hell even there rep for my area is an ass.so is the nikon guy but i prefer there products for my money.
i personally would rather own anything but leopold stuff,yaya i know what all you guys will say but ive never had anything but problems with there stuff,mounts ,rings ,goldenring optics, hell even there rep for my area is an ass.so is the nikon guy but i prefer there products for my money.
Re: Leupold PRW scope rings
I put a set of these on my sons Savage Mark II BV .22 to hold a new 30mm tubed Vortex and all is good. I'm not expecting much from them considering the price, you get what you pay for typically.
After reading the first post I did double check and they are "supposed" to fit and work with both Weaver spec and Pacitinney mil-spec 1913 rails. So far no problems on our end but then again his rifle doesn't see rough handling or abuse.
I put a set of these on my sons Savage Mark II BV .22 to hold a new 30mm tubed Vortex and all is good. I'm not expecting much from them considering the price, you get what you pay for typically.
After reading the first post I did double check and they are "supposed" to fit and work with both Weaver spec and Pacitinney mil-spec 1913 rails. So far no problems on our end but then again his rifle doesn't see rough handling or abuse.
Similar threads
