Kind of struggling with the limited options out there. Looking for something to compliment a lightweight build and 12 oz scope. I usually know where to look for most things optics related, but all my stuff typically goes in a 1 piece mount and for this I need rings. Cost is not really a factor unless its really outrageous. I don't mind paying for exactly what I am looking for. Any help is appreciated.
Lightweight 1" Picatinny Ring Recommendations
- Thread starter Burdy
- Start date
BackCountry Cross-Slot 1" Medium Rings Matte
The Leupold® BackCountry series comes in cross-slot and ringmount styles that accept both Picatinny and Weaver-style rings. This cross-slot model is specifically designed to fit any riflescope with a 1" maintube.
www.leupold.com
Best of luck!
Tagging along here as I’m thinking about getting a Vortex Razor LH (1” tube) for a lightweight truck gun but all my current ring setups are 30mm & up.
I didn’t realize NF made the ultralights in 1” do they?
I didn’t realize NF made the ultralights in 1” do they?
No, NF doesn’t make 1” ultralights, not currently at least, I looked extensively.
Was in a store today that had the Leupold Backcountry rings I linked above. They were surprisingly heavy when I picked up the package, but I didn’t have anything to judge them against (nothing qualified anyway).
Options are very limited in quality lightweight 1” picatinny rings.
I've had great luck with TPS rings.
www.tpsproducts.com
www.brownells.com
HRT 1 Inch Medium 7075 Aluminum – TPS Products
www.tpsproducts.com
TPS PRODUCTS, LLC. TSR PICATINNY SCOPE RINGS | Brownells
TSR Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then t...
www.brownells.com
at this point everything else on the rifle is light and I think I'm going to sacrifice a couple ounces and just go ahead and get ARCs. I really like their rings and I have them on other rifles. For guys looking for 1-in one-piece mounts I really like the d&z mounts and I have had zero issues with them for well over 10 years now.
If NF had made those in 1" that would be my go to. 80% of my guns have their unimount on them and I just have not found any reason to look anywhere else.
Hawkins Precision Scope Rings - Hawkins Precision
Hawkins Precision scope rings are made for every application. From hunting scope rings to heavy tactical scope rings, we have what you need.
hawkinsprecision.com
I don't see 1"Hawkins Precision Scope Rings - Hawkins Precision
Hawkins Precision scope rings are made for every application. From hunting scope rings to heavy tactical scope rings, we have what you need.
For good quality 1" rings I seem to mostly use Vortex Pro and TPS rings, although I have been pleasantly surprised with UTG Pro rings that do come in 1" diamter.
ILya.
ILya.
The new XLR rings are good to go, pretty lightweight.
xlrindustries.com
Scope Rings
XLR precision scope rings feature a progressively machined inner ring surface to achieve a seamless ring-to-scope interface. Learn more.
xlrindustries.com
Waking this thread up in hopes someone has an answer. I too seem to be stuck on the aero ar mounts, but they cannot be bedded because they are vertical rings and they also seem to pinch my scope. Not confidence inspiring. Any 1" rings out there that are as light as the aero?
I have three sets of their 34mm rings and they seem to be really well made. Also note they are made in USA.
To anyone who comes across this thread in the future in search of good, lightweight rings for 1 inch rubes, the answer is the Spuhr hunter series "aesthetic" rings and mounts. I've switched most everything over to them and they are the best. Around 3.4 oz on the rings, a little more for the mount.
I might try these Spuhr Hunter series at some point. It's getting harder and harder to sway from ARC (which is what I went with after starting this thread). The mounting process is just too easy. Additionally when it comes to a maintenance check, it's two screws. If they made forward cantilever mounts for an AR, I may move over to nothing but ARC despite the fact that I know they aren't very light. I wanted to save as much weight as possible on this build, but just liked the ARCs too much. It was the one weight sacrifice I was willing to make.
The ARC are not that heavy. They are my go to. There are only four screws including the pic mount. They open like a clam shell on top. They are very secure yet not rough on scope finish. I think ARCs are the easiest to move a scope around to get eye relief correct.
Yes, and once your scope is level, tightening to spec never moves it or rolls it like standard ring caps do.
4.5-22 Vortex Razor LH
A forum member here on the hide 3D printed it for me. I just wanted a place to rest my hand that was lightweight. I will ask him if it is OK to post his name here and if so I will let you know and update it here.
Similar threads
