Little girls stock isnt fitting correctly

[imbradm]

I bought my daughter a 10/22 and got her a purple thumbhole stock from Boyds. My issue is that it only has the one mounting screw on the 10/22s and the stock doesnt fit as snug as it should. Because it only has one action screw it works as a pivot point and ends up doing a wobble.
I would like to bed the rifle and sand the stock for a better fit.
I have heard of something like (impression ink) you can rub on the action and set in the stock and it will mark the high spots? What is this and where do I get it?
Also does anyone have any tips on helping out the fact there is only one action screw? any way to tap the reciver and add another or ... open for any ideas.

 

[tiNdvenTFHwMdqKW]

Re: Little girls stock isnt fitting correctly

Bed it from the area in front of the magazine well opening to 2-3 inches down from the action screw (bed the barrel).

There's some pictures that describe it better in this thread:

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=899491

 

[natdscott]

Re: Little girls stock isnt fitting correctly

http://www.brownells.com/.aspx/pid=7599/Product/INLETTING-BLACK-GOLD

That's what you're looking for. That, and some Devcon 10110.

-Nate

 

[imbradm]

Re: Little girls stock isnt fitting correctly

I really appreciate the advice.

 

[Victor N TN]

Re: Little girls stock isnt fitting correctly

For seeing where something rubs, try some of your wife's OLD lip stick. Put it on the metal parts and see where it rubs. Remove it with lighter fluid.

Make sure she knows what you are doing. My wife used to get me the small sample sticks they have either cheap or they actually used to give them as free samples. But they work fine. And it's cheaper than Prussian Blue.