I went to my local ammo store Looking for my normal 208 ELD bullets. Out of everything in 208 or near that from any mfg. out of my H1000 too. He had this nice box of Hornady A tips sitting there so I bought them. Figured ok I can make a safe load when I can find more powder. Did some research and I fine I need to use one of their dies with a special stem for the tip. Heck I have all RCBS stuff. Are any of you shooting these and if so what are you assembling them with. I don’t want to muck up these beauties with the wrong equipment. I am shooting 3/4 inch at 100 with my present setup. Going out this weekend to chrono both rifles. Hornady brass, CCI mag primers, 75 grains H1000 and Hornady 208 ELD.