Rifle Scopes Looking for a 34mm 30moa scope mount, does it exist?

[hartzpad]

I've been shooting my Q The Fix 6.5cr at 1 mile and 1900 yards recently. The only scope base available from Q is 0moa so I'm using a 15 moa mount for my 34mm scope. With only 59moa up on my scope, I've got to hold between 12-16 moa in the reticle which works and I can get hits 30%-50% of the time. I'd love to find a 34mm scope mount with 30moa cant to reduce my holdover. I cannot find much besides a Spuhr that is $400+. Am I missing something?

 

[lancetkenyon]

https://spuhrwebshop.com/en/isms/sp/34/9/sp-4902.html

Could you go 30MOA Picatinny riser and separate 34mm rings? I know Badger Ordinance makes a 22MOA riser.

Riser Rail - 22 MOA

P/N 249-25

www.badgerordnance.com

Badger also makes a 1 piece mount w. 20MOA cant.

Condition One Modular Mount-34mm 1.54

P/N 154-342B

www.badgerordnance.com

American Defence makes a 34mm 30MOA 1 piece mount too.

AmericanDefenseManufacturing.com Acquired by HuntingMark

Did you know that Hunting Mark has acquired American Defense Manufacturing? Keep reading this page to learn more about how you can support them.

www.americandefensemanufacturing.com

 

[dirthead1]

Desert Tech makes one, but they are $365, so not much cheaper than a Spuhr.

 

[dirthead1]

ARC also makes their M10 QD-L in 34mm/30moa.

 

[hartzpad]

https://spuhrwebshop.com/en/isms/sp/34/9/sp-4902.html

That is about all I can find.

Could you go 30MOA Picatinny riser and separate 34mm rings? I know Badger Ordinance makes a 22MOA riser.

Riser Rail - 22 MOA

P/N 249-25

www.badgerordnance.com

Badger also makes a 1 piece mount w. 20MOA cant.

Condition One Modular Mount-34mm 1.54

P/N 154-342B

www.badgerordnance.com

Unfortunately the Q Fix rifle has a proprietary top rail/scope rail with 0moa as the only option. Cannot replace it.

 

[Mooseknuckles]

If you wanted to just run rings, the Burris xtr signature rings offer bushings that you can get an extra 40 moa with. Just an option.

 

[hartzpad]

ARC also makes their M10 QD-L in 34mm/30moa.

Thank you, that is one I had not seen, not crazy about the looks but that is 2nd to function.

 

[koshkin]

Select-A-Slope Aadmount will do the trick if you can find one.

http://shop.aadmount.com/Select-A-Slope_c6.htm

That would be my ultimate choice, but it is not cheap.

The cheapest option is probably Burris' new Signature QD mount. You can use the inserts to dial in the slope. I have not tested one, but I plan to.

If you do not want a cantilevered mount you can take a 20MOA riser from Badger and then use Burris XTR Signature rings with inserts to dial in the additional slope you need. I am experimenting with that right now on my 243Win and it works quite nicely. That will run you in the $250 range,

Richard Near can probably make you an Alphamount in any slope you want, but it will probably run you around $400.

Era-tac adjustable incline mount is really nice, but around $500.

If you want to go really fancy, the Hyperion mount from Dutch Long Arms looks really promising, but it is around $1k, so I am not itching to test it.

ILya

 

[blksno]

I realize this is OLDDDDD, but I've been looking for a 34mm cantilever mount with 30 moa as well. Could get by with 20, but figured I'd start looking.
I have an Aadmount and wish he would have continued that endevor, but I realize the market and time/energy needed. Mine is only 20 and that's what I have currently, but I'm exploring others.

Have had American Defense in the past, not interested.
Spuhr doesn't have a 34/30moa in a cantilever
Would be nice to see a 34mm 30 MOA AIRBRACE
Or even the KDG Sidelock for that matter. If that were a modular 34mm with bolt down shims in 20/30/40...i'd be down to try one out.