Looking for a CZ 455 extractor…

[Shooter-up]

Anyone by chance have a CZ 455 extractor they’re willing to sell???

They are sold out everywhere and I’m dead in the water until I find one…..

I would be interested in a holder as well, but I believe the extractor is the root of my problem.


Thanks for your support,

 

[tsovern]

Are you sure it's not the spring?

 

[Shooter-up]

Yes the extractor tooth appears to have a chip in it.

 

[tsovern]

Are you referring to the bevel at the bottom inside edge?
Im not saying these don't wear, they do.
However, I've had good results by putting a new spring on what I thought was a knackered extractor.
I've been on notification lists going on 6 months for these. Not getting my hopes up. If I were you, I'd get some springs and try it. If that doesn't work, you can file a hook shape in the worn extractor, but that will only get you so many rounds until you're SOL.

 

[Shooter-up]

I’m referring to the bevel, and I could definitely have the wrong perception of the issue.
I will definitely try switching the spring.

Thanks Tsovern

 

[justin amateur]

Worse case, you pick up a sheet of spring steel and a die grinder.
Cut y'er own by tracing the outline of the original on the sheet stock.
Time consuming but not all that difficult.

 

[SanPatHogger]

I do not know what the laws say about importing gun parts.
You go first. If you can get them I'll order a couple sets for me and a friend of mine as spares.

CZ 452/455 Bolt Upgrade Kit - CZ Rifles UK

CZ Extractor, Holder and Extractor Spring for 452/455, New improved versions made of nickel, hard wearing adds superb reliability

www.czrifles.co.uk

 

[David Sand]

Anyone by chance have a CZ 455 extractor they’re willing to sell???

They are sold out everywhere and I’m dead in the water until I find one…..

I would be interested in a holder as well, but I believe the extractor is the root of my problem.


Thanks for your support,

Lance Shively at triggershims.com now sells CZ extractor kits that contain the extractor and the holder.

 

[David Sand]

I do not know what the laws say about importing gun parts.
You go first. If you can get them I'll order a couple sets for me and a friend of mine as spares.

CZ 452/455 Bolt Upgrade Kit - CZ Rifles UK

CZ Extractor, Holder and Extractor Spring for 452/455, New improved versions made of nickel, hard wearing adds superb reliability

www.czrifles.co.uk

Lance Shively at triggershims.com has CZ extractor set. Both the extractor and the holder.

 

[David Sand]

Lance Shively at triggershims.com has CZ extractor set. Both the extractor and the holder.

 

[SanPatHogger]

Lance Shively at triggershims.com has CZ extractor set. Both the extractor and the holder.

Dude... I was excited, but it looks like he only has extractor for the 457. Unless I am looking in the wrong spot

 

[lash]

Dude... I was excited, but it looks like he only has extractor for the 457. Unless I am looking in the wrong spot

I thought the 455 and 457 shared those parts?

 

[David Sand]

Dude... I was excited, but it looks like he only has extractor for the 457. Unless I am looking in the wrong spot

I believe that the same extractors fit both models of cz. Call Lance

 

[Aqua Mark]

Lance checked with CZ, and extractor works with 452/453/455/457. I ordered a couple. Always good to have spares.

 

[SanPatHogger]

Lance checked with CZ, and extractor works with 452/453/455/457. I ordered a couple. Always good to have spares.

Yea, Lance is pretty awesome. I've emailed back and forth a couple times in the last couple days. He updated the information on his site.
He also added an 8 count option. I've got a couple buddies that need them too. That is some awesome customer service.
There are a guys down here in South Texas that will be pretty happy.

CZ Rimfire Rifle Bolt Shims for CZ 455 CZ 457 and Brno

CZ Bolt Shims for setting and adjusting Bolt Headspace on CZ Rimfire Rifles Bolt Headspace Shims for CZ 452, 453, 455 CZ 457 Brno ~ CZ Extractors

www.triggershims.com