-
Having trouble using the site?
Contact support
Looking for a in depth Neck Turning Guide
- Thread starter JRWALLSIII
- Start date
Re: Looking for a in depth Neck Turning Guide
Check out www.varmintal.com and www.6mmbr.com. Both of these have some good info. Pete
Check out www.varmintal.com and www.6mmbr.com. Both of these have some good info. Pete
Re: Looking for a in depth Neck Turning Guide
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: .257</div><div class="ubbcode-body">Any good read rec????? </div></div>
There is some useful info at those two links but that is not the whole story at all. They don't actually know that much about neck turning for a factory chamber. The photo on 6mmBr of the turned neck is wrong .
It should be turned all the way to just scrape the shoulder or a donut might form on the inside of the neck.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: .257</div><div class="ubbcode-body">Any good read rec????? </div></div>
There is some useful info at those two links but that is not the whole story at all. They don't actually know that much about neck turning for a factory chamber. The photo on 6mmBr of the turned neck is wrong .
It should be turned all the way to just scrape the shoulder or a donut might form on the inside of the neck.
