Looking for a stock or chassis for a CZ 455.

[SanPatHogger]

So I fell in love with a loaner CZ 452 varmint. Buddy won't sell it to me so now I have a 455. has a heavy threaded barrel.
It has a black rubber stock. It's pretty bad.
Buddys 452 is in a Boyds Pro Varmint stock. It's nice.
I'd really like a KRG Bravo or something similar but seems they are only available for the 457 now.

Anybody have a suggestion for a stock or chassis that is available for these? Seems like the 455 isn't made anymore so the aftermarket gave up too?

 

[bigmerv]

So I fell in love with a loaner CZ 452 varmint. Buddy won't sell it to me so now I have a 455. has a heavy threaded barrel.
It has a black rubber stock. It's pretty bad.
Buddys 452 is in a Boyds Pro Varmint stock. It's nice.
I'd really like a KRG Bravo or something similar but seems they are only available for the 457 now.

Anybody have a suggestion for a stock or chassis that is available for these? Seems like the 455 isn't made anymore so the aftermarket gave up too?

I too have a cz455 that I'm looking to put in a chassis, it's a shame KRG doesn't make the bravo for it anymore. The bravo would be a no brainer for me.

 

[BigDaddy0381]

Rimfire - CZ 455 MPA BA Lite chassis

MPA BA Lite chassis for cz 455. EVG Grip, anarchy outdoors mag holder, folding stock. Has a cut on left side at the bolt as I was trying to fit my new left hand 457 before I discovered cz changed the hole spacing on the new actions. Normal handling marks on rest of chassis. Ambi cut doesn’t...

www.snipershide.com

 

[skyrep]

take a look at the Rigid Alloy PRF Chassis. They make them for the CZ455 also. Here is my CZ457:

 

[Mech45]

MPA BA CZ-455/457 Chassis - MasterPiece Arms, Inc.

Please allow 8-12 weeks for delivery from date of order. Custom Cerakote Colors add $135 for the chassis. Check with MPA for all the custom colors available.

masterpiecearms.com

 

[SanPatHogger]

MPA BA CZ-455/457 Chassis - MasterPiece Arms, Inc.

Please allow 8-12 weeks for delivery from date of order. Custom Cerakote Colors add $135 for the chassis. Check with MPA for all the custom colors available.

masterpiecearms.com

Wow, that's really nice. But over $1,000..... Ouch

 

[sgtkeebler]

My CZ455 sits in an MDT chassis and I have no complaints.

LSS Gen2 Chassis

Our LSS Chassis converts your rifle to an external box magazine fed rifle, while improving accuracy, and giving the rifle superior ergonomics.

mdttac.com

 

[SanPatHogger]

My CZ455 sits in an MDT chassis and I have no complaints.

LSS Gen2 Chassis

Our LSS Chassis converts your rifle to an external box magazine fed rifle, while improving accuracy, and giving the rifle superior ergonomics.

mdttac.com

Oh baby....
$550. I'll start digging for some extra cash.

 

[SanPatHogger]

Damn it... That one only fits the 457....

 

[J_D]

https://www.snipershide.com/shooting/threads/cz-455-mpa-ba-lite-chassis.7133214/#post-10354082

 

[beetroot]

What about a Boyds stock?
Not the flashiest stock by todays standards but they offer a tonne of different options and inlet for all the CZ models.

 

[DownhillFromHere]

Fwiw, here's my (now-gone) CZ-455 in an MDT LSS chassis with a Magpul PRS buttstock attached. MDT is showing the 455 variant as still available.

I had a piece of pic rail mounted in place of the sling swivel stud to facilitate mounting a bipod. Of course, a standard Harris bipod will mount to the swivel stud but spacers may be needed to assure tight fit.

Finally, this chassis was designed for an AR grip (which doesn't come with the chassis). If you want to mount a vertical grip, it will fit, but I found it pushed my hand and trigger finger down maybe 1/4" further than I wanted. Full disclosure, my other rifles were/are in MPA BA Comp or MDT ACC chassis, which were designed with vertical grips so the comparison with MDT LSS is kinda apples-oranges.

Fwiw. In any event, MDT is awesome to deal with. Good luck.

 

[juan916]

Rigid Alloy on my CZ455 with 16.5” barrel, getting rid of this

 

[accurate obsession]

I'm certain Craig Kierstead at PDC Custom will still make a 455 chassis.
Gen 5C

 

[BraggArmySgt]

These all look great. I bet when I get this cz455 in a chassis I jump ship and build something else before I ever shoot it. the builds are as much fun as shooting them for me. Of course finding a great deal on something built is always nice.............

 

[bobby1028]

Just picked up the MDT Oryx at a great price for a 457, $429 at EABCO, not sure if they make it for the 455 but worth a look, considerably less than the LSS minus toolless LOP adjustment which didn't bother me at all.

Oh baby....
$550. I'll start digging for some extra cash.

 

[SanPatHogger]

Guess I never updated this. I ended up with the MDT XRS in fde. I like it a lot. Ordered another for my 243