Rifle Scopes Lowest one piece 34mm mount available?

[jbell]

What is the lowest 34mm canted (around 20 MOA) non cantilever (for a bolt gun) made? I need to keep the height over bore as low as possible. So far the lowest I have found is an MPA @ 1.060”:

MPA BA Bolt Action Mount - MasterPiece Arms, Inc.

MPA BA Bolt Action Mount – 30mm, 34mm, 35mm & 36mm MPA produces one of the most popular mounts in the PRS. Used by the best shooters in the country, our BA Mounts have hosted the optics of shooters winning multiple PRS, NRL and F-class local and national championship matches. The BA Series...

masterpiecearms.com

Is there anything out there that I am missing?

 

[beetroot]

Eratac make a really low one (.984" high) but the clearance between the erector housing and the mount is very very small and many scopes won't fit.

 

[jbell]

Thank you, I'll look into them.

 

[Dobermann]

What is the lowest 34mm canted (around 20 MOA) non cantilever (for a bolt gun) made? I need to keep the height over bore as low as possible.

Why do you need to keep the height over bore as low as possible? Just asking as this is almost the opposite direction than others are going ...

 

[jbell]

Why do you need to keep the height over bore as low as possible? Just asking as this is almost the opposite direction than others are going ...

I have a fairly high pic rail on my rifle that will create a very high stack height with a 1.35” or higher mount on top of it. I don’t have any other mounting solutions for this action. So if I can keep the mount at 1” that would be optimal.