20 MOA Remington Tactical MARS rail for MK13 build
This rail has never been mounted (as indicated by the accessory pack still sealed up in the plastic) however the rail has seen a little abuse in a parts box over the years.
The majority of the markings are cosmetic only, however there are some superficial physical damage that I've shown in the photos below.
Also, the accessories are sealed in their own individual sections of the plastic sleeve/bag. However 1 section, (the section containing the 4 standard SHCS that hold the side rails on) must've gotten a small hole and been exposed to water at some point. Those screws have minor surface rust. I may have some replacements in my shop but I'll have to remember to check when I'm there. Everything else looks excellent. Close-up pics of the screws in 1st reply (I hit the attachment limit).
Asking $450. I've based this price on a sale here 2 weeks ago of a 20 MOA version with no pictures, no mention of condition, nor included accessories selling within 2-days at $400 as well as a new 0 MOA version selling on ebay last month for $495. I'm open to negotiation but if you think it's worth significantly less do you have some recent sales that back that up?
Descriptions above the respective picture.
This ding located between the 3rd and 4th holes is a physical ding, everything else visible is cosmetic and could be easily covered by some alumablack or will be covered by paint.
This ding (slightly shiny spot) is the largest physical blemish. There is a small amount of metal deformation that you can feel if you run your finger over the corner. This is a section that free-floats over the barrel so doesn't effect use. It could be hit with some sand-paper to smooth if you're going to finish this rail. Otherwise it could likely be moved back in place with a little creativity. Or it could be left alone, you'll only ever know it's there because YOU know it's there. It's only noticeable from the bottom side.
All cosmetic in this picture except the small brown ding along bottom edge toward the left. You have to look closely to see it.
Better view of small ding from previous picture.
Very small physical ding in the bottom (left) edge of the rail here (near the front end), everything else is cosmetic and the worst of the cosmetic blemishes you see there can only be seen if you get the lighting right. I actually had to do a double-take when I looked at the picture because they only showed up that well on the picture, at first I wasn't even sure what part of the rail those were on because they aren't that visible to the naked eye.
All cosmetic
Both sizes of action-screw plus respective bushings are in excellent condition as well as side-rails. Side-rail attaching screws are perfectly usable and the surface rust would be no problem if you were finishing these. It may be very minor to the point that they're just fine even if not finishing this but I didn't want to take them out of the packaging to inspect closer. There are close-up pics of the screws in the 1st reply. I am trying to represent this as fully and accurately as possible. I just want to see somebody get the correct rail for a MK13 build and be happy, and me walk away happy with the deal as well.
This rail has never been mounted (as indicated by the accessory pack still sealed up in the plastic) however the rail has seen a little abuse in a parts box over the years.
The majority of the markings are cosmetic only, however there are some superficial physical damage that I've shown in the photos below.
Also, the accessories are sealed in their own individual sections of the plastic sleeve/bag. However 1 section, (the section containing the 4 standard SHCS that hold the side rails on) must've gotten a small hole and been exposed to water at some point. Those screws have minor surface rust. I may have some replacements in my shop but I'll have to remember to check when I'm there. Everything else looks excellent. Close-up pics of the screws in 1st reply (I hit the attachment limit).
Asking $450. I've based this price on a sale here 2 weeks ago of a 20 MOA version with no pictures, no mention of condition, nor included accessories selling within 2-days at $400 as well as a new 0 MOA version selling on ebay last month for $495. I'm open to negotiation but if you think it's worth significantly less do you have some recent sales that back that up?
Descriptions above the respective picture.
This ding located between the 3rd and 4th holes is a physical ding, everything else visible is cosmetic and could be easily covered by some alumablack or will be covered by paint.
This ding (slightly shiny spot) is the largest physical blemish. There is a small amount of metal deformation that you can feel if you run your finger over the corner. This is a section that free-floats over the barrel so doesn't effect use. It could be hit with some sand-paper to smooth if you're going to finish this rail. Otherwise it could likely be moved back in place with a little creativity. Or it could be left alone, you'll only ever know it's there because YOU know it's there. It's only noticeable from the bottom side.
All cosmetic in this picture except the small brown ding along bottom edge toward the left. You have to look closely to see it.
Better view of small ding from previous picture.
Very small physical ding in the bottom (left) edge of the rail here (near the front end), everything else is cosmetic and the worst of the cosmetic blemishes you see there can only be seen if you get the lighting right. I actually had to do a double-take when I looked at the picture because they only showed up that well on the picture, at first I wasn't even sure what part of the rail those were on because they aren't that visible to the naked eye.
All cosmetic
Both sizes of action-screw plus respective bushings are in excellent condition as well as side-rails. Side-rail attaching screws are perfectly usable and the surface rust would be no problem if you were finishing these. It may be very minor to the point that they're just fine even if not finishing this but I didn't want to take them out of the packaging to inspect closer. There are close-up pics of the screws in the 1st reply. I am trying to represent this as fully and accurately as possible. I just want to see somebody get the correct rail for a MK13 build and be happy, and me walk away happy with the deal as well.
Last edited:
