$2200
This is an early model Grizzly, made in Taiwan. It’s much better quality than the current Chinese crap. In quality, It is on par with the better Jet lathes. It was made probably in the 90’s but just sat unused. The ways and gears look brand new. We used it mainly for light cutting aluminum on our Legacy shooting benches. It is exceptionally tight, holds tolerances and runs smoothly.
Anyway, it’s in great condition and everything works as it should. Specs below.
Grizzly 1224
—220 single phase 1HP motor
—12” swing and 24” between centers
—Spindle bore is 1.642” really large for this size lathe
—Belt drive. Speeds are shown on pics
—Threads in Imperical and metric
—Incl 3 jaw and 4 jaw chucks and I have an additional adjust-try Bison chuck I’ll include. See details below
—mounted on a 1/2” plate steel custom stand that dampens any movement. It’s set up to allow a circulating fluid pump (pump not included.)
—Stand also has 10 gauge backsplash
—BXA tool post inc
—steady rest and follower rests incl
—no other tool attachments included
Local pick up in Waco, TX or I can palletize it and get it ready for freight pickup for a fair fee. Details of shipping can be discussed in IM.
it will also be listed on other forums
Bison chuck is an 8” and will need hard jaws. Those can be found on eBay with a bit of patience. Pics on that coming.
I have lots of positive seller feedback on accurateshooter, also as eloudamy.
This is an early model Grizzly, made in Taiwan. It’s much better quality than the current Chinese crap. In quality, It is on par with the better Jet lathes. It was made probably in the 90’s but just sat unused. The ways and gears look brand new. We used it mainly for light cutting aluminum on our Legacy shooting benches. It is exceptionally tight, holds tolerances and runs smoothly.
Anyway, it’s in great condition and everything works as it should. Specs below.
Grizzly 1224
—220 single phase 1HP motor
—12” swing and 24” between centers
—Spindle bore is 1.642” really large for this size lathe
—Belt drive. Speeds are shown on pics
—Threads in Imperical and metric
—Incl 3 jaw and 4 jaw chucks and I have an additional adjust-try Bison chuck I’ll include. See details below
—mounted on a 1/2” plate steel custom stand that dampens any movement. It’s set up to allow a circulating fluid pump (pump not included.)
—Stand also has 10 gauge backsplash
—BXA tool post inc
—steady rest and follower rests incl
—no other tool attachments included
Local pick up in Waco, TX or I can palletize it and get it ready for freight pickup for a fair fee. Details of shipping can be discussed in IM.
it will also be listed on other forums
Bison chuck is an 8” and will need hard jaws. Those can be found on eBay with a bit of patience. Pics on that coming.
I have lots of positive seller feedback on accurateshooter, also as eloudamy.
Attachments
-
A5851468-3C0D-4A03-B6DC-1DA4F7433485.jpeg527.5 KB · Views: 183
-
1F4E9141-D451-4795-87A3-D106294EB14E.jpeg450.8 KB · Views: 178
-
C889DDDA-7534-437E-9C11-C26E8CB53076.jpeg341.9 KB · Views: 167
-
BD5BA522-B8EA-4501-B7FC-18111311DE90.jpeg401 KB · Views: 153
-
C13B7513-DD8E-4487-89E1-F96A57ECB0DC.jpeg269.8 KB · Views: 160
-
88720689-78F9-42A0-92E3-6369D64000DB.jpeg341.5 KB · Views: 140
-
CB3FDDF4-9668-4F97-8410-43D9459DC5E7.jpeg352.4 KB · Views: 137
-
C76AA484-8177-4FE6-8C77-F83EC7E884EF.jpeg303.4 KB · Views: 141
-
5F1CF7EA-35C0-461F-9046-D8FAD7ED4859.jpeg349.7 KB · Views: 131
-
496CA1D6-0311-4404-B39B-6979E8882525.jpeg380.6 KB · Views: 178