Monolith solid top rail for ar15

[rifleman1981]

I’m curious if anybody makes a rail like pro made for the mk12 rifles, that is a solid picitanny rail that will run the full length of the receiver and the handguard. Pof made a monolithic style handguard but I haven’t seen a solid rail that just bridges the receiver and the handguard. Anybody know of a company making one?

 

[Downtown]

Yeah, guy named Richard Swan came up with this one.

A.R.M.S.® #38™ S-Ex SWAN® Sleeve NSN 1005-01-469-7724 > ARMS

A.R.M.S.® #38™ S-Ex SWAN® Sleeve NSN 1005-01-469-7724 5.56 cal. 14" and has the #40™ rear flip up sight built in. It raises the rail by 1/2" while protecting the rifle dovetail rail. U.S. Patent No. 5,142,806 & 5,533,292. THE SIGHT LEANS TO THE REAR SO AS TO FOLD IN THE CORRECT DIRECTION...

armsmounts.com

 

[rifleman1981]

Yeah, guy named Richard Swan came up with this one.

A.R.M.S.® #38™ S-Ex SWAN® Sleeve NSN 1005-01-469-7724 > ARMS

A.R.M.S.® #38™ S-Ex SWAN® Sleeve NSN 1005-01-469-7724 5.56 cal. 14" and has the #40™ rear flip up sight built in. It raises the rail by 1/2" while protecting the rifle dovetail rail. U.S. Patent No. 5,142,806 & 5,533,292. THE SIGHT LEANS TO THE REAR SO AS TO FOLD IN THE CORRECT DIRECTION...

armsmounts.com

That one hangs over the front, but only attaches to the receiver. I want one that clamps to the receiver and the handguard

 

[WhiteDingo]

Any reason not to use the PRI handguard and top rail? They're still in production.
Or are you wanting the rail to attach to any old existing handguard?

 

[rifleman1981]

Any reason not to use the PRI handguard and top rail? They're still in production.
Or are you wanting the rail to attach to any old existing handguard?

I’m wanting to put it on a standard handguard and upper but the pri route is looking the most viable right now.

 

[TheColtCommando]

Actually Richard Swan made the rail and PRI copied... and no I am not aware of anyone making new ones other than PRI

 

[rifleman1981]

Pof had the predator rail system, I’m wanting something similar to that. Someone had to have done other than pof…

 

[maximusdecimusmeridius]

I’m a big fan of polylithic uppers like the vltor

LWRCi has an option

Seekins has an option

 

[BCP]

Larue sells an upper receiver with the handguard attached via 4 screws it's a good system. They are 489$ on the website. There are lots of riser rails out there like that SWAN linked up above that will put the rail out above the handguard a bit.

I've had the PRI MK12 rail before and don't really like how the top rail attaches to the other rail which in turn is attached to the forearm. Too many parts stacked on top of one another unnecessarily although it does look cool.

 

[rifleman1981]

To be clear, what I’m wanting is a rail that will attach the handguard to the receiver to make a more rigid platform. The sig Mcx handguards aren’t suitable for a laser because of how much play they have and the fact it can’t be taken out because of the way they are made. If I can find one I’ll buy a few of them and use them across multiple platforms…

 

[TrevK]

What about this one? Think it would work?

AR15 SPR Straight Top Rail for Gen II Forearms

This rifle length SPR Straight top rail is a full Picatinny rail that connects the receiver to the forearm. This top requires the 8.5" rail with lugs in order to connect top rail to forearm. This creates a rigid platform ideal for mounting accessories. This top rail works with both the Gen II...

www.precisionreflex.com

 

[rifleman1981]

What about this one? Think it would work?

AR15 SPR Straight Top Rail for Gen II Forearms

This rifle length SPR Straight top rail is a full Picatinny rail that connects the receiver to the forearm. This top requires the 8.5" rail with lugs in order to connect top rail to forearm. This creates a rigid platform ideal for mounting accessories. This top rail works with both the Gen II...

www.precisionreflex.com

I’m gonna call them, thank you sir!

 

[TrevK]

I’m gonna call them, thank you sir!

Report back if it does!