Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
how much H1000 ? is it for sale Im in Libby may be worth the drive if enoughLivingston/bozeman mt.
Have:
H1000
Imr 4350
Magnum pistol primers
Large rifle primers
Federal gm110m primers
Gm115m primers (brick)
500 115gr RN projectiles
3k + 7.62 LC brass fully processed once fired all LC headstamp
1k+ 168gr SMK projectiles
1k second fired 7.62 brass (not processed)
2k+ 9mm brass
1k+ 556 brass once fired, cleaned and polish
Loaded 55gr 556 ammo (couple 5gal buckets)
Loaded 9mm 115gr
Need:
Nf atacr mil ret
Dillon 650 accessories
139gr 6.5 lapua scenar
Ar500 or 550
Plate carrier for large sapi plates
Dirt toys
Or other fun interesting stuff
Will add $$ for partial trade items.
Machine Guns Montana is Kalispell had some when I was there last week.I am looking for IMR 4064. Have H1000, Retumbo, CFE 223 to trade. West/central.
Ive got 1500 SPP id trade some H1000 or 4350 for. Located in BozemanI have a couple pounds of h1000, h4350, superperformance for trade.
looking for primers lrp,srp,spp.
In Western Montana.
Lundemos frequently gets H43502 - 8# jugs of unopened RL33 for trade. I get to the Sidney area relatively frequently.
Looking for:
H4831,
Retumbo (LOL),
H1000,
H4350
H4895
In Western MT. Looking for 8lb jugs of H1000 and VihtaVuori N133, CCI 41 primers.
Have the following for trade
H4198
H335
Longshot
IMR 4451 (H4350 Equivalent)
IMR 4955 (H4831 Equivalent)
Green Dot
N565
Staball 6.5
Remington 1 1/2 primers
Federal 150 primers
Federal GM155M primers
Federal GM205M primers
Federal GM210M primers
Federal GM215M primers
I have roughly 7+ lbs of 4064 in unopened 1lb cans. I am roughly 1hr north of GFalls but travel that way frequently.I am looking for IMR 4064. Have H1000, Retumbo, CFE 223 to trade. West/central.
In SW MT. Looking for the following
ADG / Peterson brass in 6.5 PRC
ADG / Peterson brass in 28 Nosler
Redding dies for 6.5 PRC
Forster Co-Ax
In Western MT. Looking for 8lb jugs of H1000 and VihtaVuori N133, CCI 41 primers.
Have the following for trade
H4198
H335
Longshot
IMR 4451 (H4350 Equivalent)
IMR 4955 (H4831 Equivalent)
Green Dot
N565
Staball 6.5
Remington 1 1/2 primers
Federal 150 primers
Federal GM155M primers
Federal GM205M primers
Federal GM210M primers
Federal GM215M primers
What in God's name did you do to get sent to Deer Lodge?
I'm in Helmville. Thought you might have gotten popped for something.Looking to buy:
130 Berger AR hybrids
H4350
H4831SC
LRP
Will be located in Deer Lodge from the 10-16 of
that’s where I grew up, both my parents worked at the prison (on the good side of the bars). I will be home on leave from Hawaii to see the kids. All the reloading supplies on Hawaii are pretty much non existent, May as well do some powder shopping while I’m back at the home state.
I’d appreciate it!I'm in Helmville. Thought you might have gotten popped for something.
I have 4831, but not sure it is SC. I can check later on today.
I have H1000, H4350, superformance in NW MT, Flathead lake.looking for H1000 or Retumbo NW MT area or N Idaho - 283ten28 Mike
I will be traveling up to kootenai National forest this week if your willing to sell the H4350 and H1000
If you are looking to get rid of it I am currently in Deer lodge right now.If anybody wants once fired pistol brass in quantity, for free, let me know. I can do 9 or 45, though I cannot promise there won't be some mix in by accident. I have A LOT, so don't be shy. Only doing this because I am moving to only reloading 45 small primer cases, and I don't really need hundreds of pounds of brass sitting around. This would have to be a pickup deal. Not shipping. Could meet in Helena, Missoula, Deer Lodge or maybe even Butte. You'd be doing me a favor...
where is that located in Kalispell , im over there every month or twoMachine Guns Montana in Kalispell has 1 pound and 8 pound jugs of a lot of different powder at pre-panic prices.
I have H1000, H4350, superformance in NW MT, Flathead lake.
im in Libby Ill trade you H4350 for the imr8133 call or text 406 283 ten 28Checking in from North Idaho. I've got 4 pounds of IMR8133 I'll never use. I'm in Libby and Troy fairly often. Would drive as far as Kalispell to meet up for a trade as well. Looking for RL16, H4350, RL26 (ha ha, I know), or Federal 210M's.
I run small rifle primers in my 9x23, and it works great. Also have done it in 38 super. My guess is that it should be fine in 9mm. My only worry would be with a gun that strikes light already.for what its worth , I loaded some small rifle primers in 9mm , they ran great in both of my nines -
Interested in both 9 and 45 brass. PM sent to set up a meeting.If anybody wants once fired pistol brass in quantity, for free, let me know. I can do 9 or 45, though I cannot promise there won't be some mix in by accident. I have A LOT, so don't be shy. Only doing this because I am moving to only reloading 45 small primer cases, and I don't really need hundreds of pounds of brass sitting around. This would have to be a pickup deal. Not shipping. Could meet in Helena, Missoula, Deer Lodge or maybe even Butte. You'd be doing me a favor...