• Win an RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!

    Join the contest Subscribe

Accessories Moved to reloading section

nnnn16

Private
Supporter
Full Member
Minuteman
May 14, 2010
174
18
Texas
Bought a TL3 with this barrel on it and did some load work up while i waited on a prc barrel. Around 600-700 rounds on the barrel total, 2-300 mine. Barrel shot very well with the 139gr scenar reloads. Factory stuff was around 3" at 400yds. It comes with redding premium deluxe die set #68446, 85 once fired with 15 unfired out of the case, and 86 once fired- trimmed and turned, 12 twice fired. All norma brass. I also have a box and a half of the scenars to go with it. It did have some thread lock on the threads so i buggered up the outside of the barrel a bit when i removed it because it slipped in the vice. Maybe 125 cases sized with the die set.
Bartlein
8 twist
I think it's an M24 contour I'll measure it when I get home.

PM for more pics or with questions.
450 shipped for the barrel, the dies, the brass, and the bullets.
20191228_113422.jpg
 
Last edited:
Lots of prep work already done. Barrel was very consistent. If you have a TL3 is just plug and play. I have load data and everything. Help the poor kid with entry fees.