MPA Bag Bullet and MDT Bag Bullet on line

[Rthur]

I've shot with a MPA chassis for several years and have liked it as well as any chassis I have shot. That said, something
I've noticed is that I always felt that my rear bag was either to tall or to short for a consistent squeeze/elevation hold.
I went to work trying to come up with a solution. After a few versions this is the answer to this question:

Elevation adjustment is easily achieved on the clock and consistency is enhanced with a more light/relaxed squeeze.
I've been using it on my Vudoo/MPA and 6 Creed/MPA for several months.
Here are a few pics of them on different chassis:

They fit these models from MPA:
BA Competition
BA Lite
BA Hybrid
BA CZ-455/457
BA Ultra Lite
Let me know what you think.

R

 

[jsimonh]

Looks good! Fit and finish looks good. Any pictures on how it attaches? I used a spacer in between the ultra bag rider and chassis to make mine angle for the exact reason you mentioned.

 

[Rthur]

Looks good! Fit and finish looks good. Any pictures on how it attaches? I used a spacer in between the ultra bag rider and chassis to make mine angle for the exact reason you mentioned.

If you look closely at the picks you can see the barrel nut just above the decal.
Basically a 1/4 x 20 countersunk cap/allen bolt with a barrel nut.
Attaches very secure.
PS- I'll get some pics

R

 

[jsimonh]

I saw that, just didnt know if it threaded up through the bottom in one or two spots like the mpa ultras.

 

[Stevelightning]

I've shot with a MPA chassis for several years and have liked it as well as any chassis I have shot. That said, something
I've noticed is that I always felt that my rear bag was either to tall or to short for a consistent squeeze/elevation hold.
I went to work trying to come up with a solution. After a few versions this is the answer to this question:
View attachment 7131114
Elevation adjustment is easily achieved on the clock and consistency is enhanced with a more light/relaxed squeeze.
I've been using it on my Vudoo/MPA and 6 Creed/MPA for several months.
Here are a few pics of them on different chassis:
View attachment 7131117View attachment 7131118
View attachment 7131141

They fit these models from MPA:
BA Competition
BA Lite
BA Hybrid
BA CZ-455/457
BA Ultra Lite
Let me know what you think.

R

Very nice. Where would a person be able to get one of them.

 

[Rthur]

PM inbound.

R

 

[Ruskin]

I've shot with a MPA chassis for several years and have liked it as well as any chassis I have shot. That said, something
I've noticed is that I always felt that my rear bag was either to tall or to short for a consistent squeeze/elevation hold.
I went to work trying to come up with a solution. After a few versions this is the answer to this question:
View attachment 7131114
Elevation adjustment is easily achieved on the clock and consistency is enhanced with a more light/relaxed squeeze.
I've been using it on my Vudoo/MPA and 6 Creed/MPA for several months.
Here are a few pics of them on different chassis:
View attachment 7131117View attachment 7131118
View attachment 7131141

They fit these models from MPA:
BA Competition
BA Lite
BA Hybrid
BA CZ-455/457
BA Ultra Lite
Let me know what you think.

R

Very interesting, would like to know how to get one

 

[Rthur]

Very interesting, would like to know how to get one

PM inbound.

R

 

[Rthur]

For all of the the MDT chassis shooters I have a MDT ACC chassis on hand and will have the Bag Bullet version for it and other models
soon.
Excited to get this model out.

R

 

[shields shtr]

Me like. I have the same issue.

 

[Rthur]

Me like. I have the same issue.

Happy to help.

R

 

[Bugzlife19]

How heavy is it. Compared to the bag rider weight? Looks great very interested.

 

[Rthur]

How heavy is it. Compared to the bag rider weight? Looks great very interested.

Right at 5.5 oz on the Bag Bullet.
Haven't had hands on their version to know it's weight.

R

 

[Bugzlife19]

Right at 5.5 oz on the Bag Bullet.
Haven't had hands on their version to know it's weight.

R

Thanks

 

[swage2712]

I'd be interested in a black one.

 

[Rthur]

I'd be interested in a black one.

PM inbound

R

 

[Rthur]

Excited the Bag Bullet MDT version is coming on line.
A better description of what the Bag Bullet achieves.
As one climbs in behind the rifle gross elevation adjustment is achieved quickly.
This leaves the fine tuning of elevation of bag squeeze.
We've found that under time a more consistent elevation on impact is achieved.
Any questions you can post here or send me a PM.
Also looking to get a PP account setup to expedite transactions.

R

 

[22fun]

I've shot with a MPA chassis for several years and have liked it as well as any chassis I have shot. That said, something
I've noticed is that I always felt that my rear bag was either to tall or to short for a consistent squeeze/elevation hold.
I went to work trying to come up with a solution. After a few versions this is the answer to this question:
View attachment 7131114
Elevation adjustment is easily achieved on the clock and consistency is enhanced with a more light/relaxed squeeze.
I've been using it on my Vudoo/MPA and 6 Creed/MPA for several months.
Here are a few pics of them on different chassis:
View attachment 7131117View attachment 7131118
View attachment 7131141

They fit these models from MPA:
BA Competition
BA Lite
BA Hybrid
BA CZ-455/457
BA Ultra Lite
Let me know what you think.

R

What’s the price for the black one?

 

[squishee]

Ditto id like pricing as well

 

[Yankee88]

Curious as well

 

[jonraccrr]

Could you make one of these that attaches to a pic rail

 

[JHBearbait]

Price? Where can I get one?

 

[david8989]

I'd like some info on the black bag bullet for the MPA chassis please

 

[pmclaine]

I'd be interested in a black one.

A Black what............BBC?

 

[22fun]

A Black what............BBC?

Thought I was the only one thinking that. Too funny

 

[Dbarker]

How can I get one?

 

[aljones_315]

@shakemandril

 

[shakemandril]

I would like pricing for an MPA setup please.

 

[Sogan]

Interested in price as well for MPA

 

[Michaelpcb]

I've shot with a MPA chassis for several years and have liked it as well as any chassis I have shot. That said, something
I've noticed is that I always felt that my rear bag was either to tall or to short for a consistent squeeze/elevation hold.
I went to work trying to come up with a solution. After a few versions this is the answer to this question:
View attachment 7131114
Elevation adjustment is easily achieved on the clock and consistency is enhanced with a more light/relaxed squeeze.
I've been using it on my Vudoo/MPA and 6 Creed/MPA for several months.
Here are a few pics of them on different chassis:
View attachment 7131117View attachment 7131118
View attachment 7131141

They fit these models from MPA:
BA Competition
BA Lite
BA Hybrid
BA CZ-455/457
BA Ultra Lite
Let me know what you think.

R

I'm interested in a black one. How much?

 

[Rthur]

I'm interested in a black one. How much?

PM sent.

R

 

[avastcosmicarena]

@Rthur Can I get a quote for a black Bag Bullet for the MDT ACC chassis?

 

[Rthur]

@Rthur Can I get a quote for a black Bag Bullet for the MDT ACC chassis?

PM sent.

R

 

[Jabot]

PM incoming

 

[Rthur]

PM incoming

Pm back at ya.

R

 

[JHBearbait]

One more try.... How much is a black one?

 

[frost1235]

Are these still being made?

 

[Baron23]

https://m.facebook.com/pg/ALD-Rifles-2263349707249828/posts/

Are these still being made?

 

[Luna4570]

Are these made in Canada? Price, and will it fit on 2nd Gen Oryx chassis with slot in bottom on butt stock. Magpul chassis. Thanks