Muzzle Brake ?

[30378]

Building a 22 Creedmoor gas gun and a 5/8x24 threaded muzzle brake designed for 22 caliber is proving to be hard to find. Looking for suggestions and ideas for a 22 caliber brake with 5/8x24 threads.

 

[hlee]

Gen 3 Fat Bastard Self Timing Muzzle Brake*

American Precision Arms is very excited to share the release of the Generation 3 Fat Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new. The development of APA Gen 3 Fat Bastard was the result of American Precision Arms'...

www.americanprecisionarms.com

 

[Trigger Monkey]

Mini FTE Muzzle Brake - Clamp Style (.22 Cal | 5/8-24)

P/N 249-81

www.badgerordnance.com

Hellfire Self Timing Muzzle Brake

The HELLFIRE Self Timing Brake system was engineered from the ground up to reduce more recoil and muzzle flip, while being easier to install.

www.area419.com

Hellfire 2P - Self Timing Muzzle Brake w/ Adapter

Click HERE to add additional adapters Click HERE for the Best-Selling Hellfire Muzzle Brake The HELLFIRE 2P Muzzle Brake is designed to provide an optimized brake for Semi-Automatic and/or hunting weapons systems with barrels of 20″ or less. This brake will offer the greatest performance...

www.area419.com

That's just a few that I found

 

[6.5SH]

Being slightly oversized on the bore isn't going to affect a brake that much.

 

[stello1001]

Use a .30 cal bore muzzle device and stop whining. They will work the same..

 

[RUTGERS95]

22 creed may just be the underkin of all the wildcats. Would make a nice AR addition!

I like the deadair series

 

[502Chevelle]

Multiple tests have shown that having an exit hole a little larger really doesn’t change the recoil impulse. Don’t overlook Kahntrol brakes over at stoprecoil.com

 

[rpoL98]

you could use a 6.5CM muzzle device (.26 caliber), that's closer than a 308 muzzle device. e.g. the VG6 Gamma 65.

 

[Steel head]

Run a 6.5 brake
It will work well.

 

[sboone]

I like the PWS FSC brakes, had a 14x1LH that worked amazing on a 308 zastava M77. Had one on my 6.5cm AR10 build before using a can

 

[yotesniper66]

Patriot Valley Arms Jetblast or hybrid. Can get from 6mm up to 30 cal

 

[Snuby642]

Why the hell would anyone thread a 22 cal barrel 5/8 x 24 in the first damn place?
I thought 1/2 x 28 was a standard to keep screwups from happening.

 

[WindstormSCR]

Why the hell would anyone thread a 22 cal barrel 5/8 x 24 in the first damn place?
I thought 1/2 x 28 was a standard to keep screwups from happening.

oversize threading isn't uncommon on heavy barrel profiles that are designed for accuracy above all other considerations. The primary cited reason is to prevent "belling" of the bore near the muzzle where it can open up fractionally.

 

[Dildobaggins]

Precision rifle blog posted a long blog on muzzle brakes, he did a great write up on them. I believe APA little bastard did the best, then Alamo, and area 419. I think you'd be fine with any that have been mentioned in this thread.