• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

Muzzle Break on a 6.5 CM

Lkwoolsey

E-nothing
Full Member
Minuteman
Oct 31, 2018
183
49
Montgomery, Alabama
Ok, first off, it took me a while to decide to get a 6.5 CM. I learned on the .308 in the Army and have shot that or .300 winmag ever since. But, I finally succumbed and picked one up. Question is, I've seen a lot of guys with muzzle breaks on them. I haven't shot it yet, just picked it up tonight, but do you guys feel it's necessary? If so, what do yall like? Thanks in advance!
 
having shot them both with and without, they do make it much easier to spot your own shots... recoil isnt really a factor, but keeping that sight picture is

I'll agree with that. I normally shoot my 6.5 with a suppressor, sometimes with a muzzle break. The more you can reduce the recoil the better your follow-up will be.
 
http://www.snipershide.com/shooting...rakes-and-need-opinions.6904378/#post-7339809

Lots of good advice in the above thread - I'm a fan of the Area 419 Hellfire but, to be fair, it's the only one I have owned. There are lots of good brakes out there. Be aware that there are a number of folks that won't be "supportive" of a brake because of the extra noise it throws sideways at other shooters.

I got massively dressed down at my local range by a couple folks and actually removed it for a time until I discovered how much easier it is to spot my own impacts with it on.

Just sayin'.

VooDoo
 
I have a Precision Armament M11 on my 6.5 Creedmoor and it has been great.

Read a lot of reviews before purchasing and for me it came down to the PA M11 or M4-72. Went with the M11 because it was only ~3% less recoil reduction but didn't direct the blast back toward the shooter or the ground (bad if shooting over dirt/sand).
They both had some of the best results for recoil reduction (60%+) and lower cost (just under $100).

This caliber doesn't have a lot of recoil, but if you reduce it by an additional 60%, it will be easier to spot hits.
 
I'm running two with Witt Machine brakes. One threaded and the other clamp on. You can feel a difference between with and without them. Personally I'd say get one.
 
If you’re not shooting comps, I don’t really see a reason to get one.

If you’re thinking about field style comps, you’re putting yourself at a competitive disadvantage from a gear stand point to the people that are using them though, if you don’t use one imo.
 
Last edited: