My Distressed Terminus Zeus Build is a GO !

Lowlight

HMFIC of this Shit
Staff member
Moderator
Supporter
Minuteman
Supporter
  • Apr 12, 2001
    36,293
    43,850
    Base of the Rockies
    www.snipershide.com
    Getting ready to start the 6 ARC build so I can play with the different bullet weights and speeds, I am gonna pair this build with a gas gun so I can look at the progression from gasser to bolt in the 6 arc space.

    My Zeus build is on a Zermatt Matterhorn stock which is just crazy nice.
    25B090A1-893C-46B8-AFF9-5881DDA9FA90_1_201_a.jpeg

    The barrels are being spun up by Bugholes as we speak for some Terminus PreFit Action

    I have a 20" and 24" barrel coming so can I can experiment with the shorter barrels in the 6 arc space as they intended but also a longer barrel to get the speed, in the end it may require a 26" to get it right for comps, but I think with the factory bullets we have a potential to bridge the gap in cost to play, correctly.

    With Hornady having a :

    105gr at 2750, we know this is probably too slow, it repeats the Valkyrie numbers but with a 6mm so...

    Then they have the 103 ELDX which is 2800, might be the right first try, the speed is correct.

    Finally for factory loads i am lookin at, the 80gr Varmint load 3000fps, this might be the ticket considering the results we are seeing with the 100gr 65CM. The 100gr 65CM is bad on paper, great on steel, so at 3k, the 80gr load might be the ticket

    Anyway, this is my start, more to come
     
    I've been playing with a gas gun for this... but a bolt gun is going to be the way to go.

    I'm also trying some PVA 6mm copper solids which are running at around 2900+ FPS... That's out of a 21in BBL on an Odin Works upper that is otherwise fitted out just like my bolt guns.

    Really interested in seeing your results.

    I have a PVA drop in for the ARC CDG in 6ARC showing up... so that'll also be a nice comparison.