My Go To setup, pic heavy

[Strangedays]

Seekins Generation one lower.
Rainier Arms Billet Ultra Match Upper
Magpul UBR for the stock.
Magpul MIAD pistol grip
Timberwolf Stainless steel MIL-Spec lower parts kit.
BCM FA BCG with IONBOND finish
KNS Generation two pins
WOA 16” match barrel w/ matching bolt chambered in .223 wylde
Spikes BAR rail (built by seekins)just under 13"
Rainier Break/Compensator
BCM/Vltor Billet charging handle
JP adjustable gas block
Troy DOA sights
Troy rail covers.
Larue padded sling

Smith and Wesson M&P .40 with trigger job, red fiber optic front post, Burwell rear sight. Duracoat finish.

Blackhawk backpack with blackhawk chest rig.
Fastmags, various pouches.

 

[lazy21]

Re: My Go To setup, pic heavy

looks real good, how long is the bbl?

 

[nw911guy]

Re: My Go To setup, pic heavy

Nicely done. How does it shoot (ok, both of them)?

 

[Strangedays]

Re: My Go To setup, pic heavy

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: nw1911guy</div><div class="ubbcode-body">Nicely done. How does it shoot (ok, both of them)? </div></div>
The rifle shoots sub moa with surplus ammo (1/2 moa with 77 grain reloads), the handgun has never had an issue. I use them both in comps. The rifle was my first build and after this I will never do anything other than a build again.

 

[nw911guy]

Re: My Go To setup, pic heavy

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: strangedays</div><div class="ubbcode-body">
The rifle shoots sub moa with surplus ammo (1/2 moa with 77 grain reloads), the handgun has never had an issue. I use them both in comps. The rifle was my first build and after this I will never do anything other than a build again. </div></div>

Very nice. I may have to go the White Oak route on my next build. Current build I'm using a Wilson Combat Barrel.

How do you like the BCG?

 

[lwrkeysfisher]

Re: My Go To setup, pic heavy

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: nw1911guy</div><div class="ubbcode-body">
Very nice. I may have to go the White Oak route on my next build. Current build I'm using a Wilson Combat Barrel. </div></div>

Both of these barrels are made by Wilson, and should have Wylde chambers. I would expect them to be equals, if they are otherwise the same (material, length, profile, etc), or at least closely matched. White Oak Precision will be a different story, as they do things a bit differently.

 

[Strangedays]

Re: My Go To setup, pic heavy

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: lwrkeysfisher</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: nw1911guy</div><div class="ubbcode-body">
Very nice. I may have to go the White Oak route on my next build. Current build I'm using a Wilson Combat Barrel. </div></div>

Both of these barrels are made by Wilson, and should have Wylde chambers. I would expect them to be equals, if they are otherwise the same (material, length, profile, etc), or at least closely matched. White Oak Precision will be a different story, as they do things a bit differently. </div></div>
From what I thought is wilson is not WOA. WOA is made in house and I didn't think they made Wilson? I could be wrong though. Sorry I didn't answer the question on the BCG. It has worked great. I like the small amount of oil it needs and it is much easier to clean than any of the other ones I have owned.

 

[nw911guy]

Re: My Go To setup, pic heavy

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: strangedays</div><div class="ubbcode-body">
From what I thought is wilson is not WOA. WOA is made in house and I didn't think they made Wilson? I could be wrong though. </div></div>

x2

 

[nefarious79]

Re: My Go To setup, pic heavy

I have been told by a few people that WOA does not use Wilson blanks for their barrels, at least not their SDM barrels.

I cant wait to get some rounds through mine

 

[Furtaker_.223]

Re: My Go To setup, pic heavy

One hell of a setup you have. I LIKE !!!!!

 

[problemchild]

Re: My Go To setup, pic heavy

Looks great. Stainless on a sear face is a bad choice as you will get galling. I'd be swapping it out for a "G" trigger.

 

[Strangedays]

Re: My Go To setup, pic heavy

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: problemchild</div><div class="ubbcode-body">Looks great. Stainless on a sear face is a bad choice as you will get galling. I'd be swapping it out for a "G" trigger. </div></div>
I have ran this same lower parts kit in this rifle and others and so far after thousands of rounds put through my other rifle and this one getting the round count up there I still have yet to see any galling. I don't like two stage triggers so I always have tuned a good factory trigger to right around 3 lbs.