My New Stick

tunacan

Sergeant
Full Member
Minuteman
Feb 28, 2009
188
0
47
Utah, SLC
I finished up my 6.5X47 Lapua recently and I thought I would share the details.

Here are the specs

PTG 6.5x47 .294 neck .140 FB reamer
Trued 700 Action
Brux Barrel - Modified Rem varmint contour - 26", .800 at the muzzle
PTG 1 piece fluted bolt.
PTG .200" lug
PTG Aluminum BM
Manners EH1 Stock - Pillar bedded
Jewell Trigger
RWS Brake
TPS Rings
Vortex HSLR 4-16x44
Bolt, barrel and lug have been nitrided

Weight without scope is 8.5 lbs on the nuts. Its a sweet little gun. Balances well with no recoil. It shoots ok too

IMG_20140406_172357_zps3a3bf2eb.jpg


IMG_20140406_172405_zpsb398b198.jpg


IMG_20140406_172146_zps494a061c.jpg


IMG_20140406_172233_zpsf024bef4.jpg


IMG_20140406_172137_zpsdbab0cd6.jpg



Testing seating depths with 37.2 grains of Varget/130 Bergers/CCI 450s. 2877 FPS average. SDs and ES were very very good
Best groups were .040" and .050" off the lands. The top 2 groups were .020 and .030" off the lands. All groups shot in 15-20 mph wind
IMG_20140406_172804_zps091ecaaa.jpg



Testing RL17/130 Bergers/CCI 450s at 400 yards. 2950ish FPS with single digit spreads and SDs. This load didn't shoot well at 100 yards (just under 1" groups), but I small groups at 100 don't necessarily translate at distance.
IMG_20140406_172919_zpseeee3d3c.jpg
 
I did put it together myself. My buddy has a lathe.
I like the black bolt and stainless action, but was a little undecided about doing the black barrel and stainless brake. I really like it though. It came together well.