Got a McMillan thumbhole on my Volquartsen 10/22, but there is so much cast-off in the butt, that it's not suitable when the stage calls for weak shoulder shooting. I've used the Boyds Tacticool (sounds mall ninja doesn't it) and it's stiff enough to take a tight sling and not put pressure on the side of the barrel, and is fairly light for a laminated stock. The only other composite stock I have used is the Hogue, and that is not up to a tight sling. any thing else out there for NRL22 type shooting?
-
Having trouble using the site?
Contact support
Need 10/22 stock recomendation
- Thread starter 660grizzlyguy
- Start date
Victor Titan:
.png)
victorcompanyusa.com
Go ahead and get the cheek rest too:
victorcompanyusa.com
You might also consider the mini-rail and Titan spike (or Kidd anchor if you have a Kidd receiver) when ordering.
UPGRADE TO PRECISION
victorcompanyusa.com
Go ahead and get the cheek rest too:
BUILT FOR COMPETITION
victorcompanyusa.com
You might also consider the mini-rail and Titan spike (or Kidd anchor if you have a Kidd receiver) when ordering.
For 10/22 based systems, As Bill Meek said, the Victor Titan is pretty rigid, Magpul X-22 is also a good choice. PMACA and KIDD both make a similar low cost aluminum chassis and Mcrees and Accurate rifle systems make some nice chassis systems higher up in the price scale. Between the victor, PMACA and magpul I use the PMACA most often with the magpul coming in second, and the victor in third. All with a sling or bipod, I typically use the Magpul RLS sling with their fixed D-ring so the sling doesn't wrap back on itself in the ring.
Victor Titan:
UPGRADE TO PRECISION
Go ahead and get the cheek rest too:
BUILT FOR COMPETITION
You might also consider the mini-rail and Titan spike (or Kidd anchor if you have a Kidd receiver) when ordering.
That is a SUPER nice looking stock!
PMACA is a super solid chassis. I set one up as a lightweight using the lightest AR components along with a KIDD receiver and their ultralight barrel. NF unimount and NXS 2.5-10x42 are the heaviest part of it and it shoots dimes at 100yds. Sling pressure or bipod loading doesn't affect it. The Titan, for a conventional stock would be my other choice.
Victor Titan:
UPGRADE TO PRECISION
Go ahead and get the cheek rest too:
BUILT FOR COMPETITION
You might also consider the mini-rail and Titan spike (or Kidd anchor if you have a Kidd receiver) when ordering.
Agreed. Went from a Houge and my groups at 50 yards were cut almost in half.
Probably not. My reading comprehension isn't so good.
Just assumed a barreled action Vudoo when I saw Volquartsen.I also, would suggest the Magpul Hunter. I have my TacSol in the Backpacker and really like it.
Can anyone confirm that the Titan will stand up to a tight sling, they don't advertise an embedded aluminum piece in the forend to stiffen it up like most of the aftermarket centerfire stocks. Looks similar to the Boyds, if it's stiff I'm gonna have to try one.
No flex problem at all with my Victor Titan using a Short Action Precision positional sling or loading the bipod hard:
www.shortactionprecision.com
I own a few different 10/22 setups (including a Kidd chassis) and prefer the Titan over them all. The only things I wish it had was a fully adjustable cheek rest similar to the one on my Ruger 10/22 competition and was pre-drilled for the Kidd Supergrade rifles (which would give me an excuse to buy one).
SAP POSITIONAL SLING – Short Action Precision
The Short Action Precision Positional Rifle Sling is an evolution of years of shooting experience, with competition and unsupported positional shooting in mind. The sling has a proprietary noose cuff that tightens securely around your arm for a solid foundation. The quick adjust front strap lets...
I own a few different 10/22 setups (including a Kidd chassis) and prefer the Titan over them all. The only things I wish it had was a fully adjustable cheek rest similar to the one on my Ruger 10/22 competition and was pre-drilled for the Kidd Supergrade rifles (which would give me an excuse to buy one).
I built a custom 10/22 in a Magpul Hunter stock and like it, but would not recommend it for what you are asking for - the stock is highly adjustable with their comb and length of pull inserts, but it feels very plastic and light weight compared to my 457 in a tacticool stock.
I would go with the Titan that was recommended above - it feels much more rigid and would hold up to a tight sling.
I would go with the Titan that was recommended above - it feels much more rigid and would hold up to a tight sling.
Similar threads
Rimfire
Custom 10/22
