need a custom cover for spotting scope,,,,
- Thread starter thoegler
- Start date
Re: need a custom cover for spotting scope,,,,
Try these guys out. Talk to Harvey or Steve.
http://www.veltye.com/
Try these guys out. Talk to Harvey or Steve.
http://www.veltye.com/
Re: need a custom cover for spotting scope,,,,
Lots of good stitchers, I have gear from these guys and they all do good work. You can check and see if they will do covers for a spotter:
Red Tac Gear
Grand River Tactical
8541 Tactical
Red Hills Tactical
TAB Gear
3 Gun Gear
I'm sure there are more, but I've worked all night so mind is shot...
Lots of good stitchers, I have gear from these guys and they all do good work. You can check and see if they will do covers for a spotter:
Red Tac Gear
Grand River Tactical
8541 Tactical
Red Hills Tactical
TAB Gear
3 Gun Gear
I'm sure there are more, but I've worked all night so mind is shot...
Re: need a custom cover for spotting scope,,,,
i have a bushnell excursion flp tactical and need it in multi-cam
i have a bushnell excursion flp tactical and need it in multi-cam
Re: need a custom cover for spotting scope,,,,
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: EOD217</div><div class="ubbcode-body">i have a bushnell excursion flp tactical and need it in multi-cam </div></div>
Get the London Bridge Trading Company cover for the Leupold MK4. It fits quite nicely on the Bushnell (just need to add one hole in the bottom). What I am using below.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: EOD217</div><div class="ubbcode-body">i have a bushnell excursion flp tactical and need it in multi-cam </div></div>
Get the London Bridge Trading Company cover for the Leupold MK4. It fits quite nicely on the Bushnell (just need to add one hole in the bottom). What I am using below.
Re: need a custom cover for spotting scope,,,,
I think London Bridge Trading Company quit making the the spotting scope cover. I contacted a year or two ago looking for one. At that time they only had a couple left. I did purchase one from them and love it.
I think London Bridge Trading Company quit making the the spotting scope cover. I contacted a year or two ago looking for one. At that time they only had a couple left. I did purchase one from them and love it.
Re: need a custom cover for spotting scope,,,,
Check out this thread,
http://www.snipershide.com/forum/ubbthre...848#Post2483848
Scroll to about the middle of the page. Someone posted a scope cover they designed and built themselves. He mentioned about maybe offering some for sale.
Check out this thread,
http://www.snipershide.com/forum/ubbthre...848#Post2483848
Scroll to about the middle of the page. Someone posted a scope cover they designed and built themselves. He mentioned about maybe offering some for sale.
Re: need a custom cover for spotting scope,,,,
ATS tactical just released a Multicam cover for the Leupold MK4 spotter. It should fit the Bushnell as well (like the London Bridge one)
http://www.atstacticalgear.com/cgi/commerce.cgi?preadd=action&key=ST-6569
let us know how it goes.
ATS tactical just released a Multicam cover for the Leupold MK4 spotter. It should fit the Bushnell as well (like the London Bridge one)
http://www.atstacticalgear.com/cgi/commerce.cgi?preadd=action&key=ST-6569
let us know how it goes.
Re: need a custom cover for spotting scope,,,,
Copied from the other "Scope Cover" thread:
http://www.snipershide.com/forum/ubbthre...848#Post2483848
Here is a cover that I completed for Ratbert.
The latest revision uses a Coyote Brown size 10 self healing zipper and it very beefy.
I also created a section for a Velcro small name tape.
This case does not have the garnish straps.
(Ratbert requested that the straps be left off.)
A few specs on this case:
- All Multicam material is 1000 Denier Cordura and is genuine Crye.
- All Hook & Loop material is genuine Velcro brand.
- All panels consist of two layers of 1000D and have a thin foam padding between them.
- All stitching is double or triple stitched.
- Cases are fitted and are a tight fit.
- All cases are built to order by me, in the US and use US materials wherever possible.
- Zippers are #10 "Self Healing" Coil type and use metal sliders.
- Zipper pulls are hand tied and use Coyote Brown 550 cord.
- All cases carry a no BS lifetime guarantee.
Bushnell prototype will be going out for testing later this week.
It will be available for order as soon as I hear that it is good to go.
Here are some images of one of my new covers.
This model is outfitted with Garnish Straps and has the PALS Compatible Fast Attach System.
Should have new photos of the ARD compatible version up in a couple days.
On a future development note...
I will be releasing a version of this case with Multicam webbing.
(It actually won't be the died stuff since I think it looks like ass, but rather built up 1000D Cordura or 1" webbing covered by 1000D Cordura where extra strength is required.
Along with that, there will also be a "Stealth" version that will use a bungee / elastic system to hold the cover open.
The down side to that system is that it is not as easy to open and close, but it does eliminate any and all Velcro noise.
New ordering options will be:
- With or Without Velcro
- Multicam only model (Coyote Free except for Velcro)
- Integrated Kestrel Pouch
- Integrated Notepad
Additional fees for the new versions will be released when I post the images of the prototypes.
Another product that will be available sooner than I anticipated is a cover for the Vectronix PLRF10, PLRF10C, & Leica 1200 Scan.
A few other products in the works are:
- Integrated Tripod case
- Utility Pocket DOPE kit
- Scope case for the traditional Kowa style spotting scopes
Until my Web Site is done, please PM me with any inquiries.
The product kind of took off before I had a chance to finish all of my business preparations.
Thanks for your support,
Phillip
L8N
Copied from the other "Scope Cover" thread:
http://www.snipershide.com/forum/ubbthre...848#Post2483848
Here is a cover that I completed for Ratbert.
The latest revision uses a Coyote Brown size 10 self healing zipper and it very beefy.
I also created a section for a Velcro small name tape.
This case does not have the garnish straps.
(Ratbert requested that the straps be left off.)
A few specs on this case:
- All Multicam material is 1000 Denier Cordura and is genuine Crye.
- All Hook & Loop material is genuine Velcro brand.
- All panels consist of two layers of 1000D and have a thin foam padding between them.
- All stitching is double or triple stitched.
- Cases are fitted and are a tight fit.
- All cases are built to order by me, in the US and use US materials wherever possible.
- Zippers are #10 "Self Healing" Coil type and use metal sliders.
- Zipper pulls are hand tied and use Coyote Brown 550 cord.
- All cases carry a no BS lifetime guarantee.
Bushnell prototype will be going out for testing later this week.
It will be available for order as soon as I hear that it is good to go.
Here are some images of one of my new covers.
This model is outfitted with Garnish Straps and has the PALS Compatible Fast Attach System.
Should have new photos of the ARD compatible version up in a couple days.
On a future development note...
I will be releasing a version of this case with Multicam webbing.
(It actually won't be the died stuff since I think it looks like ass, but rather built up 1000D Cordura or 1" webbing covered by 1000D Cordura where extra strength is required.
Along with that, there will also be a "Stealth" version that will use a bungee / elastic system to hold the cover open.
The down side to that system is that it is not as easy to open and close, but it does eliminate any and all Velcro noise.
New ordering options will be:
- With or Without Velcro
- Multicam only model (Coyote Free except for Velcro)
- Integrated Kestrel Pouch
- Integrated Notepad
Additional fees for the new versions will be released when I post the images of the prototypes.
Another product that will be available sooner than I anticipated is a cover for the Vectronix PLRF10, PLRF10C, & Leica 1200 Scan.
A few other products in the works are:
- Integrated Tripod case
- Utility Pocket DOPE kit
- Scope case for the traditional Kowa style spotting scopes
Until my Web Site is done, please PM me with any inquiries.
The product kind of took off before I had a chance to finish all of my business preparations.
Thanks for your support,
Phillip
L8N
Re: need a custom cover for spotting scope,,,,
As promised, here are some photos of the ARD compatible version with PALS Compatible Fast Attach System, and Garnish Straps.
A couple things that I wanted to mention:
- The velcro for the name tape is sized for the small version of the name tape.
(This is the size used on hats & Battle Shirts.)
- The Velcro for the name tape is an option and can be left off if desired.
Next up,
LRF case & new options for the Mark 4 Case...
As promised, here are some photos of the ARD compatible version with PALS Compatible Fast Attach System, and Garnish Straps.
A couple things that I wanted to mention:
- The velcro for the name tape is sized for the small version of the name tape.
(This is the size used on hats & Battle Shirts.)
- The Velcro for the name tape is an option and can be left off if desired.
Next up,
LRF case & new options for the Mark 4 Case...
Re: need a custom cover for spotting scope,,,,
that looks awesome, Great work looking forward to seeing more
that looks awesome, Great work looking forward to seeing more
Re: need a custom cover for spotting scope,,,,
Here are some photos of my most recent batch of cases as well as a few product revisions.
Been a bit busy...
This is a new feature that will be standard on all new builds.
It is a blind pocket sewn into the inside of the objective cover designed to hold several packs of lens wipes or a lens cloth.
The stitching is not visible on the outside of the case and there is a section of cord sewn into the opening to aid in retention.
The two external pieces of binding tape where the zipper panel attached to the top and bottom has been replaced with 1000D Multicam Cordura.
Here is how the new ARD Compatible model with Garnish Straps looks:
Here is how the standard case with FATS system looks without the Garnish Straps.
And here is a shot of the production floor
I have a few new options that are being prototyped right now.
- Will be adding a piece of shock to the objective right behind the webbing.
This will enable people to affix a piece of pantyhose to the objective for use as an ARD.
- Will be making a Velcro Free model.
This model will use hooks rigged with elastic that will hook into slats similar to the way the eagle foldable ammo pouch closes.
- There will also be an option to use ITW TAC-Links instead of ITW Grim-Locs for those wanting the absolute most secure attachment system.
This will not be that standard though.
The Tac-Links are more cumbersome and in my opinion, don't work as well in this application.
Thanks again for everyone's continued support!
Cheers,
Phillip
L8N
Here are some photos of my most recent batch of cases as well as a few product revisions.
Been a bit busy...
This is a new feature that will be standard on all new builds.
It is a blind pocket sewn into the inside of the objective cover designed to hold several packs of lens wipes or a lens cloth.
The stitching is not visible on the outside of the case and there is a section of cord sewn into the opening to aid in retention.
The two external pieces of binding tape where the zipper panel attached to the top and bottom has been replaced with 1000D Multicam Cordura.
Here is how the new ARD Compatible model with Garnish Straps looks:
Here is how the standard case with FATS system looks without the Garnish Straps.
And here is a shot of the production floor
I have a few new options that are being prototyped right now.
- Will be adding a piece of shock to the objective right behind the webbing.
This will enable people to affix a piece of pantyhose to the objective for use as an ARD.
- Will be making a Velcro Free model.
This model will use hooks rigged with elastic that will hook into slats similar to the way the eagle foldable ammo pouch closes.
- There will also be an option to use ITW TAC-Links instead of ITW Grim-Locs for those wanting the absolute most secure attachment system.
This will not be that standard though.
The Tac-Links are more cumbersome and in my opinion, don't work as well in this application.
Thanks again for everyone's continued support!
Cheers,
Phillip
L8N
Re: need a custom cover for spotting scope,,,,
Nice, I need to get a better spotter so I can get one of these made.
Great looking covers you have here.
Nice, I need to get a better spotter so I can get one of these made.
Great looking covers you have here.
Re: need a custom cover for spotting scope,,,,
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 77Bronc</div><div class="ubbcode-body">Dr. Phil,
How can I get in touch with you?
77 </div></div>
PM or E-mail is the best way to get in touch with me.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 77Bronc</div><div class="ubbcode-body">Dr. Phil,
How can I get in touch with you?
77 </div></div>
PM or E-mail is the best way to get in touch with me.
Does anyone know how to reach this member? His inbox is full and the ln8 website seems to be down?
Not sure if he's making the covers any more but I would like an ARD compatible Mark4 cover.
Not sure if he's making the covers any more but I would like an ARD compatible Mark4 cover.
As promised, here are some photos of the ARD compatible version with PALS Compatible Fast Attach System, and Garnish Straps.
A couple things that I wanted to mention:
- The velcro for the name tape is sized for the small version of the name tape.
(This is the size used on hats & Battle Shirts.)
- The Velcro for the name tape is an option and can be left off if desired.
Next up,
LRF case & new options for the Mark 4 Case...
We will have the ARD version for our cover in a week or two. It's a simple option that will allow t to quickly cchange between standard lens or an ARD. I'll post more info this weekend.
You are right. It does seem off, even in the grammar.
However, since the new post might attract onlookers, I'll say that I had good luck using Creedmore Sports. Their custom spotting scope cover fits my old Kowa TSN-2 like a glove and was reasonably priced.
For those interested:
https://www.creedmoorsports.com/category/scope-accessories-and-tools
However, since the new post might attract onlookers, I'll say that I had good luck using Creedmore Sports. Their custom spotting scope cover fits my old Kowa TSN-2 like a glove and was reasonably priced.
For those interested:
https://www.creedmoorsports.com/category/scope-accessories-and-tools
