Finishing up a 300 WSM build and would like some input on an accurate load, per the Sierra manual H4895 and Varget seem to be a good start for using 168 gr bullets but would like to hear from of few experienced loaders on this caliber...Thanks
-
Having trouble using the site?
Contact support
Need an accurate 300WSM Load
- Thread starter irondude
- Start date
Re: Need an accurate 300WSM Load
I use H4350 in my 300WSM for everything from 150 SST to 208 Amax. I would think Varget to be to fast so I never tested. H4831 might work well also but velocity was slower than H4350 for me.
My load is 64.5 gr H4350 using 175 SMK and Fed 210 primers in Win brass. I seat the bullets .015 off the lands. This load will shoot under 1/2 moa to 600yds. 175 VLD and 208 Amax also shoot very well. Sort of depends what ends up working for you.
You might find this article interesting, it also has some loads attached.
300 wsm Article
I use H4350 in my 300WSM for everything from 150 SST to 208 Amax. I would think Varget to be to fast so I never tested. H4831 might work well also but velocity was slower than H4350 for me.
My load is 64.5 gr H4350 using 175 SMK and Fed 210 primers in Win brass. I seat the bullets .015 off the lands. This load will shoot under 1/2 moa to 600yds. 175 VLD and 208 Amax also shoot very well. Sort of depends what ends up working for you.
You might find this article interesting, it also has some loads attached.
300 wsm Article
