Need help finding a barreled action!!!!

[JC_Tikka6.5]

Guy and gals I'm looking to get a Tikka T3x SS 6.5 creedmoor 24" barreled action. Since I'm going to swap the stock for a MDT or maybe another chassis I figured why not just get a barreled action with out the stock and put that money towards a better scope. I have searched with no luck. Has anyone been able to get a Tikka t3x barreled action by itself. Or has everyone had to buy a complete rifle and just dump the stock?

 

[R_Swanson]

Or has everyone had to buy a complete rifle and just dump the stock?

This is standard practice. The stock isnt worth much anyway.

 

[JC_Tikka6.5]

I found a new complete Tikka 6.5 SS t3x for 700. I'm thinking that's as good as a deal I might get.

 

[DJL2]

Can you imagine the killing Tikka would make if they pulled actions that sampled as true/square off the line and sold them for like $550? I bet people would spend the money just to avoid dealing with the hassle of pulling and binning parts or trying to resell the bits not needed/wanted.

 

[Steel head]

Can you imagine the killing Tikka would make if they pulled actions that sampled as true/square off the line and sold them for like $550? I bet people would spend the money just to avoid dealing with the hassle of pulling and binning parts or trying to resell the bits not needed/wanted.

I’d probably buy one tomorrow.

 

[jcmullis2]

Looks like you’re going get stuck with a stock you don’t want. I’d get the t3 varmint with the heavy barrel in 6.5cm

 

[adamjma]

Can you imagine the killing Tikka would make if they pulled actions that sampled as true/square off the line and sold them for like $550? I bet people would spend the money just to avoid dealing with the hassle of pulling and binning parts or trying to resell the bits not needed/wanted.

Agreed, but I bet they wouldn't because of the liability. Some asshat will blow his face off and sue.

 

[Bradv86]

I found a new complete Tikka 6.5 SS t3x for 700. I'm thinking that's as good as a deal I might get.

Is that a CTR? The lighter barrels are quite thin unless that is what you are going for. Either will still shoot well.

 

[JC_Tikka6.5]

Is that a CTR? The lighter barrels are quite thin unless that is what you are going for. Either will still shoot well.

No it's for the LITE. I want it for hunting. I probably wont try and hunt anything past 500 yards just to make sure it has enough power to put the animal down.

 

[JC_Tikka6.5]

Is that a CTR?

Does 700 seem to much for the lite?

 

[hereinaz]

Cheap factory rifles ship with a stock shaped object attached as plastic shipping packaging...

 

[Bradv86]

Does 700 seem to much for the lite?

For a new one that's good.

I was just curious if you wanted a light barrel contour as most people tend to gravitate to heavier profiles with chassis rifles.

For a light weight goal then it is understandable.

 

[Harman117]

Can't speak of current prices, but right before pandemic I bought my new Stainless Tikka T3X Lite in 6.5 Creedmoor for $599. Blued version was cheaper yet.

Got mine from grab-a-gun via their quote system.

Sold the bottom plastic and stock already for ~$60, and I'm about to pull the unfired barrel. Figured I could get around ~$100 easy for that.
Putting stainless action/trigger at $440ish.

 

[JC_Tikka6.5]

For a new one that's good.

I was just curious if you wanted a light barrel contour as most people tend to gravitate to heavier profiles with chassis rifles.

For a light weight goal then it is understandable.

What would you suggest? I'd like to use it for hunting however I would also like to use it for shooting targets at 1,000 yards. I'm wondering if I should not get a lite at that point? Since I'm getting a chassis for it it may increase weight anyhow. Which tikka you think would be best ?

 

[Jrb572]

Put a proof or bartlien carbon fiber barrel on it

 

[JC_Tikka6.5]

Can't speak of current prices, but right before pandemic I bought my new Stainless Tikka T3X Lite in 6.5 Creedmoor for $599. Blued version was cheaper yet.

Got mine from grab-a-gun via their quote system.

Sold the bottom plastic and stock already for ~$60, and I'm about to pull the unfired barrel. Figured I could get around ~$100 easy for that.
Putting stainless action/trigger at $440ish.

Wow! I'll try and look for that deal. Do you still see it for that price? If so ....link would be appreciated

 

[Harman117]

Search results for: 'Tikka T3x'

grabagun.com

Looks like they don't have the "Request offer" button active anymore on most models. But it looks like typical Stainless T3X lites are up to the $650ish range. Change most likely due to pandemic buying

 

[DJL2]

Can't speak of current prices, but right before pandemic I bought my new Stainless Tikka T3X Lite in 6.5 Creedmoor for $599. Blued version was cheaper yet.

Got mine from grab-a-gun via their quote system.

Sold the bottom plastic and stock already for ~$60, and I'm about to pull the unfired barrel. Figured I could get around ~$100 easy for that.
Putting stainless action/trigger at $440ish.

I'm travelling that road myself. I won't say it was an "impulse" purchase, necessarily, but in the process of acquiring a T3x Lite S/S from the PX here @ $625. I wanted an action with a magnum bolt face and that was more palatable than spending $1500+ for an action and a good trigger. That $900 savings can get me a stock and a prefit, or very nearly, without even recouping anything on bits and pieces.

Did you list the stock here? I'm torn on the barrel now...I envisioned it as a hunting/target rig with more punch than the CM family of cases, with better performance at range than my -06. I was thinking hard about 7mm SAUM...however, as it's a 7mm RM...it'll do nicely as a hunting rig as is, even if not optimal. It won't be something I want to spend a ton of time behind at the range though, I suspect.

 

[Harman117]

I'm travelling that road myself. I won't say it was an "impulse" purchase, necessarily, but in the process of acquiring a T3x Lite S/S from the PX here @ $625. I wanted an action with a magnum bolt face and that was more palatable than spending $1500+ for an action and a good trigger. That $900 savings can get me a stock and a prefit, or very nearly, without even recouping anything on bits and pieces.

Did you list the stock here? I'm torn on the barrel now...I envisioned it as a hunting/target rig with more punch than the CM family of cases, with better performance at range than my -06. I was thinking hard about 7mm SAUM...however, as it's a 7mm RM...it'll do nicely as a hunting rig as is, even if not optimal. It won't be something I want to spend a ton of time behind at the range though, I suspect.

I listed my stock on eBay, at the time I don't think I was able to sell on here.

 

[King_beardsly]

I’d say check out the defacto barreled action from ultimatum, but it’s a little pricey.

(New) Ultimatum DeFacto action (Tikka T3) Barreled action+trigger deal

Ultimatum FB posted this. Barreled action with trigger for $999.99 [For those who have all been waiting, here is the new Ultimatum DeFacto! ? Based on the Tikka T3 footprint, but with the same ultra smooth 3 lug 60° bolt throw as with our other actions, mated to an IBI match grade barrel...

www.snipershide.com

 

[never_summer]

I’d say the defacto looks like it’s priced pretty well for what you may receive. Talked to them last week and timeline for delivery is still end of June. I preordered a .223 at the start of February, feels like I’m waiting on a tax stamp.

 

[JC_Tikka6.5]

I'm travelling that road myself. I won't say it was an "impulse" purchase, necessarily, but in the process of acquiring a T3x Lite S/S from the PX here @ $625. I wanted an action with a magnum bolt face and that was more palatable than spending $1500+ for an action and a good trigger. That $900 savings can get me a stock and a prefit, or very nearly, without even recouping anything on bits and pieces.

Did you list the stock here? I'm torn on the barrel now...I envisioned it as a hunting/target rig with more punch than the CM family of cases, with better performance at range than my -06. I was thinking hard about 7mm SAUM...however, as it's a 7mm RM...it'll do nicely as a hunting rig as is, even if not optimal. It won't be something I want to spend a ton of time behind at the range though, I suspect.

PX is where? I'm new to this forum. You got one hell of a deal. I was hoping to get one for that price. Yours is used?

 

[Bradv86]

PX is where? I'm new to this forum. You got one hell of a deal. I was hoping to get one for that price. Yours is used?

PX is the Post Exchange, for sale section near the bottom of the forums.

 

[DJL2]

Once you burn through your probationary period (without BS posts, hopefully), the PX section here on the Hide is down towards the bottom of the forum listings. If you can find someone selling what you want, there are deals to be had. I was actually looking for a used custom rig, but, I saw a new T3x Lite S/S for $625 and thought "why not?"

 

[JC_Tikka6.5]

PX is the Post Exchange, for sale section near the bottom of the forums.

Oh ok found it. Looks like I cannot post there yet till I have a full membership. I thought that was only to sell? Im guessing even post post WTB it applies the same rules.

 

[DJL2]

Ja, but you can always PM a seller if you see something you like.

 

[JC_Tikka6.5]

Ja, but you can always PM a seller if you see something you like.

Wish I could find a deal like yours. I'm not seeing any so far

 

[Bradv86]

Oh ok found it. Looks like I cannot post there yet till I have a full membership. I thought that was only to sell? Im guessing even post post WTB it applies the same rules.

Wish I could find a deal like yours. I'm not seeing any so far

PX moves fast, check daily and something will pop up.

 

[JC_Tikka6.5]

PX moves fast, check daily and something will pop up.

Thank you for your help . This forum so far has nothing but willing to help people. I'm used to people just bad mouthing online for any reason . Hahha

 

[Bradv86]

Thank you for your help . This forum so far has nothing but willing to help people. I'm used to people just bad mouthing online for any reason . Hahha

No problem. There is more info here than I could ever wish to learn. Just trying to assist where I can.

If you want to post in PX, at the top of the forum you can click upgrade and purchase posts. It will allow you to post items for sale or WTB threads.