need help to find an AR10 barrel

Atti_Mac

Sergeant
Full Member
Minuteman
Apr 15, 2010
509
0
54
TX
I did my research, and followed lots of post, but every time I called someone, like WOA, or Lilja , they don't have 308 16" barrels for AR-10
Will you guys help me out, where can I found a high end 308 barrel for my new Mega Arms Monolithic Upper/lower?
Thank You
 
Re: need help to find an AR10 barrel

If you're actually going the AR-10 route:

EA0905CB16P_1.jpg


http://www.762sass.com/product.php?p=866&cid=4&session=38546757031972a507df14b2891a9d14

Call them and see if you have to use the SASS gas system or not.

Best to you.
 
Re: need help to find an AR10 barrel

762SASS as noted above is a good source, as well as Rainier Arms (they carry Rainier/Shilen UltraMatch tubes, Noveske, etc.), DSG Arms (they carry Noveske), the EE on BARFCOM, the PX here on the Hide, etc.
 
Re: need help to find an AR10 barrel

Krieger actually stocks some. Look on their inventory page. You will have to send them your bolt, and it takes about a month for turn-around.

ETA: nm, I didn't notice the 16" part.
 
Re: need help to find an AR10 barrel

magyar,

go to www.rainierarms.com and go with either their 16" Select (blackhole weaponry barrel $295) or the ultramatch (shilen blank chambered by WOA $395).

Both options are cheaper than going with the other options mentioned. I suggest buying a barrel and bolt and having them check the headspace.
 
Re: need help to find an AR10 barrel

Not too shabby, Tx_Flyboy.

Not too da-da-damn shabby, at all.

http://www.rainierarms.com/?page=shop/br...mp;pagenumber=1

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tx_Flyboy</div><div class="ubbcode-body">magyar,

go to www.rainierarms.com and go with either their 16" Select (blackhole weaponry barrel $295) or the ultramatch (shilen blank chambered by WOA $395).

Both options are cheaper than going with the other options mentioned. I suggest buying a barrel and bolt and having them check the headspace. </div></div>
 
Re: need help to find an AR10 barrel

Black Hole....I've had 6. Of those, 2 have been reasonable.
Barrel 1- shot in excess of 6 MOA (after "hot" 10rds or more)
Barrel 2- Shot in excess of 4 MOA (after "hot" 10rds or more)
Barrel 3- (this was actually a warrany trade of barrel 2)- Depending on ammo, this barrel shot 2-5 MOA
Barrel 4- (308) Something was wrong with the extension (bolt would not go into battery & it didnt matter if the barrel was on or off the gun)
Barrel 5 & 6- (these were a 308 barrels) Shoot great, hot cold doesnt matter what load you shoot through it.
 
Re: need help to find an AR10 barrel

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TripleD</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: A MAGYAR</div><div class="ubbcode-body">TripleD, are you talking about this? :
http://www.rainierarms.com/?page=shop/detail&product_id=2338

I just ordered it. </div></div>

No, that says it is a schilen blank. </div></div>


The ones I referenced were Black Hole Weaponry barrels. Specifically 223. Interestingly a respected 3 gunner was recently saying he had one(223)that was great. I guess its a real crap shoot on the 223 barrels.