New 20 MOA Ring Mount for GAP-10, In stock

[A10XRIFLE]

We had Badger make us up a 20 MOA ring mount for the GAP-10, they are 1.270 in height will clear 5x25 S&B and Hensoldt 56 mm scopes as well. they are 34mm tube and come with 30mm reducers for 30mm Scopes. Perfect for all AR type rifles needing 20 MOA for LR Travel.

In stock ready to ship

 

[Redmanss]

Re: New 20 MOA Ring Mount for GAP-10

Aaarrrggghhhh!!!!

I just bought one of the BO 34mm cantilever mounts from Triad, but this is EXACTLY what I've been looking for. Timing is everything I guess.

How do I get one?

 

[A10XRIFLE]

Re: New 20 MOA Ring Mount for GAP-10

Call the Shop. (816) 221-1844 talk to Ken

Price without inserts is $185

With the 30 MM inserts it will be $205

 

[Redmanss]

Re: New 20 MOA Ring Mount for GAP-10

Thanks George. I'll give him a call Friday when I'm stateside.

Is it steel or alloy?

 

[Aubie]

Re: New 20 MOA Ring Mount for GAP-10

I placed an order this morning for a GAP-10 and actually asked if the sales rep if they sold any one piece AR mounts. He told me no!

I then placed an order for a Bobro mount.. I'll have to check tomorrow and see if it is too late to cancel.

 

[Lowlight]

Re: New 20 MOA Ring Mount for GAP-10

Nice,

 

[Chiller]

Re: New 20 MOA Ring Mount for GAP-10

Thank you George.

 

[NOMAD]

Re: New 20 MOA Ring Mount for GAP-10

Nice!!

 

[mattmcg]

Re: New 20 MOA Ring Mount for GAP-10

Nicely done George. I've been wondering when someone might lower the scope height on these types of builds...

 

[Rob01]

Re: New 20 MOA Ring Mount for GAP-10

Very nice set up!

 

[spot69221]

Re: New 20 MOA Ring Mount for GAP-10

Steel or alloy?

 

[Cegorach]

Re: New 20 MOA Ring Mount for GAP-10

That looks extremely nice. Clean and well executed.

 

[powderBurnz]

Re: New 20 MOA Ring Mount for GAP-10

Very Nice George! Perfect!

 

[BigCarrot]

Re: New 20 MOA Ring Mount for GAP-10

So is there an upcharge for this on a build, or is it an even swap for the Badger rings that come with it?

 

[A10XRIFLE]

Re: New 20 MOA Ring Mount for GAP-10

They will be the mount that comes with every GAP-10 and be available for sale on our website as well for other AR Type Rifles.

They will start shipping with all our GAP-10 rifles in 2 weeks
(waititng on inserts for 30 mm tubes)

 

[A10XRIFLE]

Re: New 20 MOA Ring Mount for GAP-10

7075 Alloy Hard Anodized, just like the reciever it sits on

 

[A10XRIFLE]

Re: New 20 MOA Ring Mount for GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Aubie</div><div class="ubbcode-body">I placed an order this morning for a GAP-10 and actually asked if the sales rep if they sold any one piece AR mounts. He told me no!

I then placed an order for a Bobro mount.. I'll have to check tomorrow and see if it is too late to cancel.

</div></div>

He didnt know they exsisted till last night.

 

[Tactical]

Re: New 20 MOA Ring Mount for GAP-10

George that is sweet, can you add one to my AR10 build parts?

 

[bunsen27]

Re: New 20 MOA Ring Mount for GAP-10

Perfect timing!

I've been looking at 20MOA bases/mounts for my LR-308 and this is perfect for the already odd rail height of the DPMS smooth side reciever. The fact that it is either 34mm or 30mm is a great feature. Looking forward to these becoming available soon!

 

[-Nick-]

Re: New 20 MOA Ring Mount for GAP-10

Mine is supposed to be finishing up this week. Can I add it to my order and have it sent later when it comes in or will it delay the rifle until they arrive?

 

[SS-8541-dono]

Re: New 20 MOA Ring Mount for GAP-10

any chance for a 35mm model?

 

[Jrb572]

Re: New 20 MOA Ring Mount for GAP-10

Love that mount. Ok here's my question. Can I use the 30mm reducers then a 1" reducer? Building off a POF upper I like the mount. But have a 1" 10x mill mill dot Bushnell I'd like to use till I save up some extra cash for a different scope.

 

[AWP]

Re: New 20 MOA Ring Mount for GAP-10

Great looking mount.

 

[T2CH]

Re: New 20 MOA Ring Mount for GAP-10

Will these be available in a quick detach latches?

 

[JonLSU]

Re: New 20 MOA Ring Mount for GAP-10

I'm in for one, just got an AR10 and just ordered a scope. This is perfect timing. Calling Tuesday

 

[sobrbiker883]

Re: New 20 MOA Ring Mount for GAP-10

That looks perfect! I think you nailed the height!

 

[Impact]

Re: New 20 MOA Ring Mount for GAP-10

does it clear a buis underneath ? troy for example. thanks !

 

[sobrbiker883]

Re: New 20 MOA Ring Mount for GAP-10

Gonna be dependent upon your optic's ocular. You may be able to fit a KAC300m (flattest I found) under, but it doesn't look like a Troy would be happening.

Personally I see these kind of rifles as precision weapons, and would rather have a good cheekweld than the ability to fit BUIS under my scope since I never found a need for one.

I'm sure YMMV if you play on a 2-way range away from support for a living, but.....

 

[JonLSU]

Re: New 20 MOA Ring Mount for GAP-10

I love the mount, but I don't have a Gap10. Question is, any chance one of these will fit on an AR10 style rifle that has the rail all the way down the barrel? I have a Noveske N6 with 21in barrel. I notice the Gap10 has the rail cut away for the bell of the scope to fit there. Say I have a 50mm scope, any chance it would fit on my rifle, or is this pretty much made only for the Gap10's rail system?

 

[captnmo]

Re: New 20 MOA Ring Mount for GAP-10

ETA on the 30MM inserts?

 

[T2CH]

Re: New 20 MOA Ring Mount for GAP-10

Still not in and I got no answer of when they would be today when I talked to Tracy. My GAP-10 is ready to ship and I wanted the 20 MOA base so I am just going to trade in for it when the they get them together.

 

[vmpglenn]

Re: New 20 MOA Ring Mount for GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JonLSU</div><div class="ubbcode-body">I love the mount, but I don't have a Gap10. Question is, any chance one of these will fit on an AR10 style rifle that has the rail all the way down the barrel? I have a Noveske N6 with 21in barrel. I notice the Gap10 has the rail cut away for the bell of the scope to fit there. Say I have a 50mm scope, any chance it would fit on my rifle, or is this pretty much made only for the Gap10's rail system?
</div></div>

I would think this would be too low on a standard AR10/LR308 flattop. The GAP-10s all come with a handguard that requires a "riser" type extension to attach it to the upper receiver. This has the effect of raising the receiver rail height as compared to "standard" AR10/LR308 upper receivers.

Nightforce makes a 1.375" Unimount for standard flattop receivers, and that height is pretty close to perfect for an AR10/LR308.

 

[hypertex]

Re: New 20 MOA Ring Mount for GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SS-8541-dono</div><div class="ubbcode-body">any chance for a 35mm model? </div></div>

Anyone...anyone???

 

[DavidAR10]

Re: New 20 MOA Ring Mount for GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: vmpgsc</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JonLSU</div><div class="ubbcode-body">I love the mount, but I don't have a Gap10. Question is, any chance one of these will fit on an AR10 style rifle that has the rail all the way down the barrel? I have a Noveske N6 with 21in barrel. I notice the Gap10 has the rail cut away for the bell of the scope to fit there. Say I have a 50mm scope, any chance it would fit on my rifle, or is this pretty much made only for the Gap10's rail system?
</div></div>

I would think this would be too low on a standard AR10/LR308 flattop. The GAP-10s all come with a handguard that requires a "riser" type extension to attach it to the upper receiver. This has the effect of raising the receiver rail height as compared to "standard" AR10/LR308 upper receivers.

Nightforce makes a 1.375" Unimount for standard flattop receivers, and that height is pretty close to perfect for an AR10/LR308. </div></div>

Roger That. NF#A191

 

[lazy21]

Re: New 20 MOA Ring Mount for GAP-10

btt

 

[A10XRIFLE]

Re: New 20 MOA Ring Mount for GAP-10

Mounts are now in stock ready to ship

 

[SS-8541-dono]

Re: New 20 MOA Ring Mount for GAP-10

35mm option ?

 

[wallmon]

Re: New 20 MOA Ring Mount for GAP-10

I think if you take out the spacers you've got 35mm. (See first post)

 

[Redmanss]

Re: New 20 MOA Ring Mount for GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wallmon</div><div class="ubbcode-body">I think if you take out the spacers you've got 35mm. (See first post)</div></div> There's no mention in the OP about 35mm anything. It's a 34mm ring, and the spacers take it down to 30mm.

 

[wallmon]

Re: New 20 MOA Ring Mount for GAP-10

Yeah, my bad. Meant 34mm

 

[A10XRIFLE]

Re: New 20 MOA Ring Mount for GAP-10

No plans for a 35mm only 34 and 30

 

[captnmo]

Re: New 20 MOA Ring Mount for GAP-10

I just received the unimount with 30MM inserts and they look great!

Thank you George and Ken! I received my GAP-10 about 6 weeks ago and the Badger rings were not included. I asked Ken about it and requested that if possible, I would wait until the unimount was available with the 30MM inserts and pay the difference. Without asking, Ken put me on the waiting list and sent me the unimount free of charge. I know these are now standard with the GAP-10 but Ken worked this out before they were ready, so I appreciate his proactive approach to correcting the original mistake.

I can't say enough about GA Precision's quality of both their product and their customer service!

 

[lazy21]

Re: New 20 MOA Ring Mount for GAP-10

Got mine today

 

[dvdt]

Re: New 20 MOA Ring Mount for GAP-10

Will a USO 3.2-17x44 TPAL <span style="font-weight: bold">34mm</span> tube fit in this bad boy ? I don't have a S&B PMII for comparison

The erector housing of my scope USO 3.2-17x44 TPAL <span style="font-weight: bold">30mm</span> tube is ~3 in long and ~1.5 in tall.

George said they are 1.270 inch tall but unfortunately my level of incompetence doesn't know which measurement that is...

Thanks in advance!

 

[MtGoat]

Re: New 20 MOA Ring Mount for GAP-10

Does the top rail need to be milled for clearance as in the photos?

Pat

 

[justme]

Re: New 20 MOA Ring Mount for GAP-10

I have this same mount only in 1.50 height on order with my S&B 5-25 MSR. The scope should clear on my SR-25 and should have no problem getting a good cheek weld since I have a PRS on my rifle.
The BO # on my mount is 306-64. It's not shown on BO's website yet.
THANKS - out to Hide Vender -Jay @ Optics Specialist for fixing me up with this combo.

 

[2rsquared]

Re: New 20 MOA Ring Mount for GAP-10, In stock

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: A10XRIFLE</div><div class="ubbcode-body">We had Badger make us up a 20 MOA ring mount for the GAP-10, they are 1.270 in height will clear 5x25 S&B and Hensoldt 56 mm scopes as well. they are 34mm tube and come with 30mm reducers for 30mm Scopes. Perfect for all AR type rifles needing 20 MOA for LR Travel.


In stock ready to ship </div></div>

Hoping this will work for a Premier Light Tactical and my long neck.

Thanks for the 1.27" height but <span style="font-weight: bold"><span style="text-decoration: underline"><span style="font-size: 14pt">how much "extension" is there?</span></span> </span>

I put the tip of my nose on the charging handle and need the scope mounted a bit further forward.

I realize my alternative is to extend the LOP with an adjustable stock (i.e. PRS) but I am trying to keep it simple and keep the standard A2 stock's on my AR's.

 

[T2CH]

Re: New 20 MOA Ring Mount for GAP-10, In stock

Works fine on my GAP 10. I use the NTCH as well with a CTR stock.

 

[mattmcg]

Re: New 20 MOA Ring Mount for GAP-10, In stock

Does anybody have one of these mounted up on a full pic rail in a 50mm S&B scope? My existing mount at 1.5" high is simply too high and would love to drop it down a bit.

Setup is an LMT MWS with 4-16x50 scope. Would love confirmation with a pic that there is enough clearance from the objective to the rail.

 

[lazy21]

Re: New 20 MOA Ring Mount for GAP-10

need to order another

here it is with my new USO