New Look for my LMT MRP 10.5

[ryu_sekai]

Got rid of the weapon light on top and replaced it with the Gear Sector Mount and SF Viking L4 200 Lumen LED(Thanks to Jason from Gear Sector for helping me pick out a light and mount) , along with a couple other changes
The Gear Sector Mount was everything i was looking for, Light Weight, Low Profile, and Robust.
Specs:
LMT MRP 10.5 Upper
Battle Comp 1.0
BCM Ion Bond BCG
PRI GB CH
Troy FUFS/BUIS
LaRue SPR LT104 Mount
GRCS 1-4 CQB FFP Scope
GEAR SECTOR Offset Light Mount
VIKING L4 SUREFIRE E2D LED
Magpul RVG Cut down

So far i have about 400 rds through it, I had short stroking issues at the beginning because of the Extra strength buffer spring, ST-T2 Buffer and the Full Auto carrier but I went back to the standard buffer spring and it has been 100% even with wolf and tula.

The Gear Sector Mount is very low profile, Love It.

ETA: The rifle consistently shoots about 1.75 - 2.25 10 rds groups with PMC 55 gr and about 3-4" with Wolf/Tula

 

[edwin907]

Re: New Look for my LMT MRP 10.5

I haven't found a rifle yet that shoots 100% with an extra power recoil spring.
Looks great, love the cut down forward grip.
I often run a 3X with my M4S as the LMT MRP 10.5" barrel is quite accurate. That 1-4X scope looks good, how's it working out? And how about daylight illumination?

Have you tried any 75/77gr ammo? MK262 and Hornady 5.56 75gr T2 both shoot accurately, as well as being the best self defense rounds you could load with 70+ yards of frag range. MK262 was my standard load till I procured enough T2 5.56.

With Wes's (@MSTN)recommended standard spring and H buffer and the M16 BCG, my rifle is 100% suppressed/not with all 5.56 loads as well as the standard 223 AE 55gr, Win 55gr ST, BHBB 75gr, and BH 69gr.
Haven't tried any Wolf/Bear steel case or other underpowered stuff.

 

[ryu_sekai]

Re: New Look for my LMT MRP 10.5

The 1-4 is great i zero the circle dot @ 50 and the top dot is automatically zeroed at 100 so i have 50, 100, 200 POA/POI covered the Large horse shoe of course is for CQB. I can not see the lit up reticle out doors at all, the reticule is clear just no illumination. I have about 50 rds each of 77/75/69/68 Match but have not shot any of it yet.

ETA: agree on MRP being very accurate my buddy shot a couple 5 rd groups @ 50 measuring about .50-.75 with factory 55 gr.

 

[Chucky]

Re: New Look for my LMT MRP 10.5

Have you run into issues with your light being mounted that close to the flash hider?

 

[ryu_sekai]

Re: New Look for my LMT MRP 10.5

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: chucky</div><div class="ubbcode-body">Have you run into issues with your light being mounted that close to the flash hider? </div></div>

have not shot it yet, was using a light that was behind the Comp before. gonna take it out next week

 

[Chucky]

Re: New Look for my LMT MRP 10.5

The reason I asked is with the light right behind the comp like that you are going to carbon up the lens pretty quickly.

 

[ryu_sekai]

Re: New Look for my LMT MRP 10.5

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: chucky</div><div class="ubbcode-body">The reason I asked is with the light right behind the comp like that you are going to carbon up the lens pretty quickly. </div></div>

might happen, gonna try and see, i cant move it back any further unless i get a pressure pad

 

[trident1982]

Re: New Look for my LMT MRP 10.5

Awesome build brother

MRPs certainly rule the roost!

 

[trident1982]

Re: New Look for my LMT MRP 10.5

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: edwin907</div><div class="ubbcode-body">I haven't found a rifle yet that shoots 100% with an extra power recoil spring.
Looks great, love the cut down forward grip.
I often run a 3X with my M4S as the LMT MRP 10.5" barrel is quite accurate. That 1-4X scope looks good, how's it working out? And how about daylight illumination?

Have you tried any 75/77gr ammo? MK262 and Hornady 5.56 75gr T2 both shoot accurately, as well as being the best self defense rounds you could load with 70+ yards of frag range. <span style="font-weight: bold">MK262 was my standard load till I procured enough T2 5.56.</span>

With Wes's (@MSTN)recommended standard spring and H buffer and the M16 BCG, my rifle is 100% suppressed/not with all 5.56 loads as well as the standard 223 AE 55gr, Win 55gr ST, BHBB 75gr, and BH 69gr.
Haven't tried any Wolf/Bear steel case or other underpowered stuff.

</div></div>

Seriously....do have my favorite stashed as deep as your mk262 supply....if so, your truly a rock star.