I got a break enough to put some new colors onto my all time favorite predator killing stick. The first paint job was still holding strong after 4 years and was a bit of a chore (PITA) to remove the old paint to put on some new ARPAFLAGE Coyote camo for a change of pace. This has a base of both heat cured and ambient cured CeraKote along with overlays of DuraCoat. If you look close you will find some coyotes within the paint scheme. Pictures are not the greatest, but are what I have.
While I had it down, and because I am also going to paint my #2 predator killing stick, I swapped scopes and put the lower power NXS onto this one and will put the higher power onto the longer range rifle.
This rifle is a custom built 6mm SPC. The parent is a 6.8 SPC but this is necked down to accept the 6mm bullets. I put a PRS with the Accushot monopod and a MIAD grip onto it and a VTac float tube. 3.5-15x50 NightForce NXS with my favorite hunting reticle the NP1-RR sits in some Larue rings. The barrel is a Bartlein 5R and is 22 inches long. I have a 1.5 pound JARD single stage inside to round things out. This thing is pure death on the predators and very very few ever get the chance to tell their friends that they escaped.
I thought I would share one of my own with all my SnipersHide friends. Next up for paint is my 243 WSSM AR15. I might rig this one out for some longer distance shooting.
While I had it down, and because I am also going to paint my #2 predator killing stick, I swapped scopes and put the lower power NXS onto this one and will put the higher power onto the longer range rifle.
This rifle is a custom built 6mm SPC. The parent is a 6.8 SPC but this is necked down to accept the 6mm bullets. I put a PRS with the Accushot monopod and a MIAD grip onto it and a VTac float tube. 3.5-15x50 NightForce NXS with my favorite hunting reticle the NP1-RR sits in some Larue rings. The barrel is a Bartlein 5R and is 22 inches long. I have a 1.5 pound JARD single stage inside to round things out. This thing is pure death on the predators and very very few ever get the chance to tell their friends that they escaped.
I thought I would share one of my own with all my SnipersHide friends. Next up for paint is my 243 WSSM AR15. I might rig this one out for some longer distance shooting.
