G
Guest
Guest
jonaddis84
XFirst Sergeant
Rating: 3.6/5 this site
2987 posts this site
New Product: Billet Interchangeable Head Powder Funnel
12/17/2016 Last edited 12/17/2016 by jonaddis84
Just thought Id share this here for those interested.
area419.com/product/master-funnel-kit
area419.com/product-category/products/reloading
The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.
Universal plastic powder funnels have several issues that are solved with this system:
1. Static cling. Plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2. No such thing as universal. There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont fit.
3. Universal means that it has a hole meant for 22 caliber. So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.
The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck-diameter specific for each caliber. They do not rely on fitting over the body of the case to hold in place. They are sized slightly larger than the neck diameter so that they hold solid on the case. Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber. This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc). The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.
The Funnel’s design is both aesthetic and performance driven. Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls. This also makes it far safer for use with black powder.
Rate now:
BlackbrushXGunny Sergeant
Rating: 3.2/5 this site
661 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/17/2016
Very nice. How about some accessory long drop tubes for over capacity/compressed loads?
Rate now:
carnzen1XPrivate
Rating: 0.0/5 this site
7 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/17/2016
This looks awesome.
Also, i think he has drop tubes in the pic. And on the site to buy.
Spendy, but sooooo worth it
Rate now:
spawnof918vXFirst Sergeant
Rating: 2.6/5 this site
3755 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
Yeah, long drop tube, like 12" or so.
Rate now:
jonaddis84
XFirst Sergeant
Rating: 3.6/5 this site
2987 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
Drop tubes are in the pic, they're stackable to make any multiple of 3" long you should desire.
Rate now:
mercracingXGunny Sergeant
Rating: 3.1/5 this site
704 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
Looks great Jon!!
Rate now:
padom
XFirst Sergeant
Rating: 3.8/5 this site
3050 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
Very nice. Just placed my order for the Ultimate kit.
What's timing for these back in Stock to ship?
Rate now:
BraduXFirst Sergeant
Rating: 3.4/5 this site
2158 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
They look great
Rate now:
KibaSHX72 MONTHS
Premium Member
First Sergeant
Rating: 3.4/5 this site
1360 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
Total overkill...
...but also totally awesome.
Honestly, the price for the set is very reasonable IMO. It's only a few bucks more than I've spent for 6 different sized Satern aluminum funnels over the years.
Rate now:
padom
XFirst Sergeant
Rating: 3.8/5 this site
3050 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
I also use Saturn's. Have been in need of a second .223 and 6.5 funnel so I decided to grab this instead of 2 more Saturn's. Like quality made stuff.
XFirst Sergeant
Rating: 3.6/5 this site
2987 posts this site
New Product: Billet Interchangeable Head Powder Funnel
12/17/2016 Last edited 12/17/2016 by jonaddis84
Just thought Id share this here for those interested.
area419.com/product/master-funnel-kit
area419.com/product-category/products/reloading
The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.
Universal plastic powder funnels have several issues that are solved with this system:
1. Static cling. Plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2. No such thing as universal. There are always cases that just wont work well with the universal design, and funnels tip off and spill powder, or they just plain wont fit.
3. Universal means that it has a hole meant for 22 caliber. So if you are trying to dump 90 grains into a big magnum, you are waiting a long time for the powder to fill.
The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck-diameter specific for each caliber. They do not rely on fitting over the body of the case to hold in place. They are sized slightly larger than the neck diameter so that they hold solid on the case. Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber. This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc). The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.
The Funnel’s design is both aesthetic and performance driven. Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls. This also makes it far safer for use with black powder.
- “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck. It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.
- 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
- Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
- MADE IN USA! Machined in house at ARea 419 from USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!
- Machined in house from a solid billet of 6061-T6 aluminum, every single surface of the block is machined.
- Holds the funnel with or without a head attached as well as 10 spots for heads or drop tubes to be stored
- Front six head storage locations are engraved for standard calibers as well as color coded to match the funnel heads anodizing
- Rubber feet on the bottom keep from sliding around on your bench
- Handle machined from solid 6061-T6 USA Aluminum
- Handle has a 5/16″ hole for hanging the funnel on a peg hook or to mount the funnel to a bench
- Comes with (2) 18-8 Stainless button head screws and hex key for installation
- All funnels have provisions for mounting the handles
Rate now:
BlackbrushXGunny Sergeant
Rating: 3.2/5 this site
661 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/17/2016
Very nice. How about some accessory long drop tubes for over capacity/compressed loads?
Rate now:
carnzen1XPrivate
Rating: 0.0/5 this site
7 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/17/2016
This looks awesome.
Also, i think he has drop tubes in the pic. And on the site to buy.
Spendy, but sooooo worth it
Rate now:
spawnof918vXFirst Sergeant
Rating: 2.6/5 this site
3755 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
Yeah, long drop tube, like 12" or so.
Rate now:
jonaddis84
XFirst Sergeant
Rating: 3.6/5 this site
2987 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
Drop tubes are in the pic, they're stackable to make any multiple of 3" long you should desire.
Rate now:
mercracingXGunny Sergeant
Rating: 3.1/5 this site
704 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
Looks great Jon!!
Rate now:
padom
XFirst Sergeant
Rating: 3.8/5 this site
3050 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
Very nice. Just placed my order for the Ultimate kit.
What's timing for these back in Stock to ship?
Rate now:
BraduXFirst Sergeant
Rating: 3.4/5 this site
2158 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
They look great
Rate now:
KibaSHX72 MONTHS
Premium Member
First Sergeant
Rating: 3.4/5 this site
1360 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
Total overkill...
...but also totally awesome.
Honestly, the price for the set is very reasonable IMO. It's only a few bucks more than I've spent for 6 different sized Satern aluminum funnels over the years.
Rate now:
padom
XFirst Sergeant
Rating: 3.8/5 this site
3050 posts this site
Re: New Product: Billet Interchangeable Head Powder Funnel
12/18/2016
I also use Saturn's. Have been in need of a second .223 and 6.5 funnel so I decided to grab this instead of 2 more Saturn's. Like quality made stuff.