Has any one had the illumination turn on in their scope while shooting. Mine has loosened up to the point that it turns on by the third shot and I have to keep turning it back off. Just wondering if they is an easy adjustment to make as I dont want to send it in.
-
Having trouble using the site?
Contact support
Rifle Scopes nightforce NXS illumination knob--FIXED
- Thread starter kwild
- Start date
Re: nightforce NXS illumination knob
Call and talk to Nightforce about it. Doesn't seem right and the scope should run right. They will either tell you how to fix it or have you send it in. I know it sucks to send a scope in but it sucks worse not having a scope work right.
Call and talk to Nightforce about it. Doesn't seem right and the scope should run right. They will either tell you how to fix it or have you send it in. I know it sucks to send a scope in but it sucks worse not having a scope work right.
Re: nightforce NXS illumination knob
I actually bought the scope used and it had a good click to it to turn on the ill. Now it doesnt have the click. Must be my heavy recoiling 308 lol. I will send nightforce an email.
I actually bought the scope used and it had a good click to it to turn on the ill. Now it doesnt have the click. Must be my heavy recoiling 308 lol. I will send nightforce an email.
Re: nightforce NXS illumination knob
NIGHTFORCE ROCKS!!!!!!!!!!!!!!!!!!!!!! Shortly after I sent me email I got a response on how to fix it. Went to the garage and grabbed my precision screwdriver set as my Mac master set didn't have the proper size in it. I had to ground my smallest one down a bit to fit and adjusted as per Kens email. Problem fixed. Now THAT is customer service!
NIGHTFORCE ROCKS!!!!!!!!!!!!!!!!!!!!!! Shortly after I sent me email I got a response on how to fix it. Went to the garage and grabbed my precision screwdriver set as my Mac master set didn't have the proper size in it. I had to ground my smallest one down a bit to fit and adjusted as per Kens email. Problem fixed. Now THAT is customer service!
Re: nightforce NXS illumination knob
NF rocks!!!! I never experienced that with my scope, glad you got it fixed. Their service is great in my experience.
And I'm glad to see you helped another member here with your learning, this is the Hide I signed on for. Great peeps that help out each other.
NF rocks!!!! I never experienced that with my scope, glad you got it fixed. Their service is great in my experience.
And I'm glad to see you helped another member here with your learning, this is the Hide I signed on for. Great peeps that help out each other.
Re: nightforce NXS illumination knob
I've dealt with both Ken and Brian at NF, both very helpful, both very fast to return emails. And as an added bonus, they actually know what they're talking about
-V-
I've dealt with both Ken and Brian at NF, both very helpful, both very fast to return emails. And as an added bonus, they actually know what they're talking about
-V-
Re: nightforce NXS illumination knob
Could you let us know what was said in the email? This could be an issue for other users.
Could you let us know what was said in the email? This could be an issue for other users.
Re: nightforce NXS illumination knob
I had to file down my smallest precision screwdriver to get in there and that is what took the time, but it was a very simple fix. The knob has a very distinct click to it now. Hopefully if anyone else has this issue this will fix them up too.
> 1. Turn on the illumination
> 2. Locate the four-detent screws in the center of the
> turret (these are in the gap in the turret, created when the
> illumination is turned on)
> 3. Using a small jewelers flathead screwdriver, give each
> detent screw half a turn
> 4. After you have given each a half turn, attempt to push
> the illumination turret to the off position. If the tension
> is too great, back off the detent screws slightly by .25
> turn.
I had to file down my smallest precision screwdriver to get in there and that is what took the time, but it was a very simple fix. The knob has a very distinct click to it now. Hopefully if anyone else has this issue this will fix them up too.
> 1. Turn on the illumination
> 2. Locate the four-detent screws in the center of the
> turret (these are in the gap in the turret, created when the
> illumination is turned on)
> 3. Using a small jewelers flathead screwdriver, give each
> detent screw half a turn
> 4. After you have given each a half turn, attempt to push
> the illumination turret to the off position. If the tension
> is too great, back off the detent screws slightly by .25
> turn.
Re: nightforce NXS illumination knob
Sounds like Nightforce needs to spend an extra nickle on each scope in production and put some locktite on the screws. Its nice of them to make owners of their products "field technicians" though.
I'll let ya know when my Leupold needs the same treatment.
Sounds like Nightforce needs to spend an extra nickle on each scope in production and put some locktite on the screws. Its nice of them to make owners of their products "field technicians" though.
I'll let ya know when my Leupold needs the same treatment.
Re: nightforce NXS illumination knob
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Goin'Hot</div><div class="ubbcode-body">Sounds like Nightforce needs to spend an extra nickle on each scope in production and put some locktite on the screws. Its nice of them to make owners of their products "field technicians" though.
I'll let ya know when my Leupold needs the same treatment. </div></div>
Yeah you let me know when that happens.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Goin'Hot</div><div class="ubbcode-body">Sounds like Nightforce needs to spend an extra nickle on each scope in production and put some locktite on the screws. Its nice of them to make owners of their products "field technicians" though.
I'll let ya know when my Leupold needs the same treatment. </div></div>
Yeah you let me know when that happens.
Re: nightforce NXS illumination knob
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: grunt soldier</div><div class="ubbcode-body">lol goin'hot. trying to stir the pot? </div></div>
Never
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: grunt soldier</div><div class="ubbcode-body">lol goin'hot. trying to stir the pot? </div></div>
Never
Thanks for posting this. I'm 50 rounds into my new 300 prc with the nx8 2.5-20 and had the illumination turn on from recoil.
Will be locating a jewellers flat head asap.
