I can pick up a ZRODelta 34mm mount at a darn good price. I want to put 30mm inserts to accomidate my scope. The 34mm is 1.50 to centerline of bore above rail. I'm now using Seekins rings at 1.45 above rail. Is this difference in height going to adversely effect my cheek weld? I'm wanting to use the same scope on 4 different AR's.
-
Having trouble using the site?
Contact support
Not really marksmanship, but dumb question to me. Scope Mount
- Thread starter longrange454
- Start date
The same scope on four different rifles? That seems to me like a real pain in the neck, unless each rifle is identical to the last, etc. Aren't you concerned about having to rezero all the time when you switch amongst the four?
It's not that i'll be constantly changing scope from weapon to weapon. If i put it on my Grendel it'll stay mounted all hunting season, then during the off season maybe on my 223.
In order to get the good deal you have to compromise with inserts and a slightly different sight height?
In my opinion, I would pass on it.
In my opinion, I would pass on it.
.05 is not much. I don't think you will have a problem so long as it still clears.
As for swapping scopes across rifles, I do it with a couple of rifles. I just keep DOPE for zero on each one which is no different than for different loads. End up a click off every now and again.
As for swapping scopes across rifles, I do it with a couple of rifles. I just keep DOPE for zero on each one which is no different than for different loads. End up a click off every now and again.
One of the main reasons i'm thinking along this line, is i have a Nightforce NXS compact with the IHR reticle that i like real well for my purposes.
Similar threads
