<span style="font-weight: bold">MODArmory has (1) Hand-Select Units:
MODArmory has (1) AN/PVS-24LR - Clip On Night Vision Device - Longe Range (CNVD-LR) in stock.
MFG by L-3 Warrior Systems w/ high performance generation III Image Intensifier
This 1 unit is hand select.
We only have (1) unit left until our next shipment arrives.
Questions: Give us a call at (719) 325 8070, PM or email us at: [email protected]</span>
Additional Bonus Features: Custom aluminum lens shade. The reason for the custom lens shade is when used on short barreled rifles, gases and debris were getting passed the standard lens shade. This protects the objective lens.
The Long Range Clip-On Night Vision Device (CNVD-LR) is a rugged, clip-on night vision device designed for higher caliber weapons and snipers. For those who require long range identification and engagement, the CNVD-LR clips-on in line with, and in front of various day sights, eliminating the need to remove the primary day optic. With operational environment capabilities, the CNVD-LR meets or exceeds military standards in terms of humidity, dust, sand, impact, etc. The CNVD-LR features a single switch, operating both the power on and off and the manual gain. There is an LED located below the on/off gain control switch that glows red to indicate a low battery. The CNVD-LR operates either on a single CR123 standard lithium battery or a single AA battery. The CNVD-LR features battery reverse polarity protection and uses a quick-detach throw lever mount, which is compatible with a standard rail interface system. An objective hood, a daylight cover and a collimator hood provide impact protection to the system from light and other environmental factors. The night sight has a detection range of 850 meters or 930 yards and is submersible up to 66 feet (20 meters).
•FIELD OF VIEW (FOV) 8°
•FOCAL LENGTH 110 mm (4.3 in)
•MINIMUM FOCUS DISTANCE 25 m (27.3 yd)
•MAGNIFICATION 1x (Unity)
•LENS Fast f/1.85 Catadioptric
•BORESIGHT CHARACTERISTICS
•ACCURACY Aligned to .4 MOA or Better
•RETENTION Permanent to 1 MOA or Better
•REPEATABILITY Within .5 MOA
•ADJUSTMENTS None Required
•OUTPUT OPTIC 28 mm (1.1 in)
•OPTICS WEIGHT 875.4g with battery (1.9 lbs)
•SIZE 25.1cm L (w/light baffle)x 9.7cm W x 8.6cm H (9.9 in L x 3.8 in W x 3.4 in H)
•OPERATING TEMPERATURE -40°C to +51°C (-40°F to +124°F)
•STORAGE TEMPERATURE -51°C to +71°C (-60°F to +160°F)
•COLOR Taupe (Desert Tan)
•MOUNT Single-Throw Lever Quick-Disconnect Mount for Picatinny Rail (MIL-STD-1913/STANAG 2324 )
•POWER OPERATING TIME 16(+) hours @ room temperature
•POWER SOURCE 1 CR123 Lithium Battery ( or 1 AA Battery with Optional Battery Conversion Cap)
To visit our website: http://www.modarmory.com/index.php?main_page=product_info&cPath=92&products_id=614
MODArmory specializes in Night Vision and Night Vision related accessories. We stock the following: PVS-14, PVS-7, ANVIS, CNVD-LR's, D-740's, D-760's and all of the related accessories such as: 3x magnifiers, IR Illuminators - Luna Optics, Wilcox NVG mounts, Norotos, PT Helmets and more.
MODArmory has (1) AN/PVS-24LR - Clip On Night Vision Device - Longe Range (CNVD-LR) in stock.
MFG by L-3 Warrior Systems w/ high performance generation III Image Intensifier
This 1 unit is hand select.
We only have (1) unit left until our next shipment arrives.
Questions: Give us a call at (719) 325 8070, PM or email us at: [email protected]</span>
Additional Bonus Features: Custom aluminum lens shade. The reason for the custom lens shade is when used on short barreled rifles, gases and debris were getting passed the standard lens shade. This protects the objective lens.
The Long Range Clip-On Night Vision Device (CNVD-LR) is a rugged, clip-on night vision device designed for higher caliber weapons and snipers. For those who require long range identification and engagement, the CNVD-LR clips-on in line with, and in front of various day sights, eliminating the need to remove the primary day optic. With operational environment capabilities, the CNVD-LR meets or exceeds military standards in terms of humidity, dust, sand, impact, etc. The CNVD-LR features a single switch, operating both the power on and off and the manual gain. There is an LED located below the on/off gain control switch that glows red to indicate a low battery. The CNVD-LR operates either on a single CR123 standard lithium battery or a single AA battery. The CNVD-LR features battery reverse polarity protection and uses a quick-detach throw lever mount, which is compatible with a standard rail interface system. An objective hood, a daylight cover and a collimator hood provide impact protection to the system from light and other environmental factors. The night sight has a detection range of 850 meters or 930 yards and is submersible up to 66 feet (20 meters).
•FIELD OF VIEW (FOV) 8°
•FOCAL LENGTH 110 mm (4.3 in)
•MINIMUM FOCUS DISTANCE 25 m (27.3 yd)
•MAGNIFICATION 1x (Unity)
•LENS Fast f/1.85 Catadioptric
•BORESIGHT CHARACTERISTICS
•ACCURACY Aligned to .4 MOA or Better
•RETENTION Permanent to 1 MOA or Better
•REPEATABILITY Within .5 MOA
•ADJUSTMENTS None Required
•OUTPUT OPTIC 28 mm (1.1 in)
•OPTICS WEIGHT 875.4g with battery (1.9 lbs)
•SIZE 25.1cm L (w/light baffle)x 9.7cm W x 8.6cm H (9.9 in L x 3.8 in W x 3.4 in H)
•OPERATING TEMPERATURE -40°C to +51°C (-40°F to +124°F)
•STORAGE TEMPERATURE -51°C to +71°C (-60°F to +160°F)
•COLOR Taupe (Desert Tan)
•MOUNT Single-Throw Lever Quick-Disconnect Mount for Picatinny Rail (MIL-STD-1913/STANAG 2324 )
•POWER OPERATING TIME 16(+) hours @ room temperature
•POWER SOURCE 1 CR123 Lithium Battery ( or 1 AA Battery with Optional Battery Conversion Cap)
To visit our website: http://www.modarmory.com/index.php?main_page=product_info&cPath=92&products_id=614
MODArmory specializes in Night Vision and Night Vision related accessories. We stock the following: PVS-14, PVS-7, ANVIS, CNVD-LR's, D-740's, D-760's and all of the related accessories such as: 3x magnifiers, IR Illuminators - Luna Optics, Wilcox NVG mounts, Norotos, PT Helmets and more.
