Objective caps for Sig 10K ABS Gen II?

[Fox One]

Hello,
I've just placed an order for a pair of the above referenced Binos and I understand that they do not come with objective caps. Does anyone have a recommendation for the purchase of compatible objective caps, front and rear?

 

[justanotheruser]

Check out MK Machining.

 

[Fox One]

Check out MK Machining.

Thank you for the suggestion, and I did check them out but they do not make any objective caps, at least according to their website. I did, however, manage to cannibalize a pair of rear objective caps from an old pair of binoculars that I have never really used. Now the hunt is on for the eyepiece objective caps.

 

[PJC]

This

https://a.co/d/0EIf0OX

And this

Amazon.com

I use these on my Gen 1 and am happy.

 

[Fox One]

This

https://a.co/d/0EIf0OX

And this

Amazon.com

I use these on my Gen 1 and am happy.

Thank you for the links, I will check them out. The rear objective caps should work, but I understand that the eyepiece rims were changed on the Gen II, and there may be some dimensional issues. I have however ordered both and will see it they work. Thanks again, Ron.

 

[Fox One]

Hello PJC, I’ve received the eyepiece caps that you have suggested and they work well, a little tight, but better tight than loose. Thanks again.
As an aside, I spent way too much time trying to install the included neck strap and finally surrendered, as it was a no go. Who designs these things? I’ve placed an order for an alternative from Amazon.

 

[LEROYRECCE]

Hello PJC, I’ve received the eyepiece caps that you have suggested and they work well, a little tight, but better tight than loose. Thanks again.
As an aside, I spent way too much time trying to install the included neck strap and finally surrendered, as it was a no go. Who designs these things? I’ve placed an order for an alternative from Amazon.

Can you share the link on the front and rear caps you went with please? Thank you.

 

[ruger35]

I used the ones linked above and they were a little tight on the objectives but they worked.

 

[LEROYRECCE]

I used the ones linked above and they were a little tight on the objectives but they worked.

Thank you

 

[Fox One]

Can you share the link on the front and rear caps you went with please? Thank you.

Here are the links for the front and rear caps:
https://www.amazon.com/dp/B00I3ZZZVI?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Amazon.com

Click on the “amazon.com” word for the front caps.

 

[Lil' Tone]

Check out MK Machining.

We (MKM) actually just came out with a specific set for these a couple weeks ago with a few options. A regular set of caps and a cap set where the left cap has an ARCA foot to mount in a tripod

Just Caps: https://www.mkmachining.com/product/sig-kilo10k-gen-ii-binocular-cap-set-non-arca/
Caps with ARCA foot: https://www.mkmachining.com/product/sig-kilo10k-gen-ii-binocular-cap-set-arca/
Both: https://www.mkmachining.com/product/sig-kilo10k-gen-ii-binocular-cap-set-non-arca-arca/