Suppressors Ocm 5 on 6arc

[BurtG]

Anyone doing it ?

 

[Redmanss]

What does your end cap opening measure? The OCM5 is on my near range list of suppressors to get and I'd love to run it on a 6ARC coyote gun, but I've read it's real tight on clearance.

 

[Overwatch260]

I wanted to do that as well... Called OCL & they advised against it due to tight baffle clearances as @Redmanss said. They didn't sound too interested in building a 6mm bore version either

 

[Bluedog82]

The Polonium/K are 6mm bored though.

 

[Bacarrat]

https://www.instagram.com/spartan7.62/ has a 6ARC on his Mod H. I am pretty sure he is a member on here too. Not too sure what he had done to the can, I think I read long time ago where the can had enough clearance to run a 6mm bullet. I'm sure someone will correct me on this.

 

[HardRockARC]

Allen engineering makes AEM variants for other calibers.

 

[charnicus]

The AEM30k is the same length as an AEM5. Definitely okay with 6mm.

Supposedly the AEM5 stock has a bigger hole. If it was gonna be dedicated for a 6ARC I’d just get that vs hoping the other works. No manufacturer will say it’ll work.

I want to say I’ve seen what Baccarat is talking about also. I have daydreamed about doing the same.

 

[SpeedyR]

not sure if it helps but I bought a Dead Air Lazarus 6 so I could try one of the 6mm variants in the future. Haven't looked into it enough to know if ARC, MAX or some other variant might win out for me. I guess even a 6mm CM can be shot thru it.

 

[DeathBeforeDismount]

How is the back pressure on these cans? I know they were designed WAY before flow through was a thing, but does the reflex/large vollume help with blowback?

 

[FatBoy]

How is the back pressure on these cans? I know they were designed WAY before flow through was a thing, but does the reflex/large vollume help with blowback?

Nope. I can’t speak for the OCM5 but the AEM5 will gas you hard if you run 4-5 rapidly, even with the PRI Gasbuster. I still love the can and would 100% buy again.

 

[alfmoonspace]

Measurements are the exit (end) of each suppressor.

OCM5 - ~.269
POLONIUM K - ~.304

 

[TxAg93]

OCL told me the same thing about the ocm5 being too tight for 6mm.
FORSystems is coming out with a can that uses the mk12 mounting system and good for 6mm. They’re designing it with back pressure in mind so it should be a good performer considering the cans they’ve already come out with. Although the aesthetics are not like the ocm5/aem5 unfortunately. If it didn’t have the abnormal shape I’d be very tempted to grab one even though I’ve already got a CAT Noah. I think a 6arc mk12 would be very cool

 

[dster3]

Allen engineering will make a custom 6mm can, i believe they said it would take 6 weeks. You'll have to call

 

[lonestar1845]

I run my OCM5 on my 6 max with their OTB 5/8x24 mount without any issues.

As far as getting gassed out, it's actually worse on my mk12 than the 6 max. Need to swap charging handles to see if that has anything to do with it.

 

[The Knuckle]

Anyone doing it ?

Yup, 6max and 6gt. No problem but I checked with an alignment rod

 

[Basic user]

How is the back pressure on these cans? I know they were designed WAY before flow through was a thing, but does the reflex/large vollume help with blowback?

Mine's gassy but not too bad actually.

 

[DeathBeforeDismount]

Thats like saying your gay but mostly like girls. Its kinda contradictory LOL.

 

[roostercogburn98]

Thats like saying your gay but mostly like girls. Its kinda contradictory LOL.

Let’s keep this professional in the tech forums please