LMT Firing pin add on +$8 (2 available)
BCM Firing Pin add on +$5 (2 available)
Vltor rifle length A5 buffer spring add on +$5
Ejection port cover kit (mil spec) add on +$5
(5 available)
Choose a free 3d printed part w/ battery bundle: Magpul cr2032 grip insert, AR bolt jig, Sba3 extended insert, or sba3 cr123 storage insert.
Backup weapons light/optics battery bundle:
CR123A 3V Lithium 10 pack w/ 5 pack of CR2032 lithium $25 shipped. Two for $40 shipped.
*Magpul cr2032 grip insert: 10 left
* AR Bolt Disassembly Jig: ~~7~~ 6 left
* Sba3 Extended storage insert ~~6~~ 5 left
* Sba3 Cr123 storage insert: ~~8~~ 5 left
PayPal FF Venmo Cashapp (no notes or comments)
Notes:
* These are the highest quality CR123 lithium just were requested to have unbranded wrappers. (Energizer) The CR2032 are Duracell lithium.
* Bolt Disassembly Jig for .223/5.56/.300. Easily remove the Extractor and Ejector springs. Jig has holes in the bottom for punching pins. Turn the dial to apply pressure to the Ejector spring so that the pin can be properly aligned for removal and installation. Extremely easy. Pm me for a 6.5/6.8 version. I have to swap plugs during assembly
* Sba3 insert is designed to maintain the shape of the soft rubber while being stored or transported, with an extended rear surface to allow vertical storage. Obviously has to be removed prior to use.
AR bolt disassembly jig below
Sba3 extended insert below
Sba3 cr123 insert below
BCM Firing Pin add on +$5 (2 available)
Vltor rifle length A5 buffer spring add on +$5
Ejection port cover kit (mil spec) add on +$5
(5 available)
Choose a free 3d printed part w/ battery bundle: Magpul cr2032 grip insert, AR bolt jig, Sba3 extended insert, or sba3 cr123 storage insert.
Backup weapons light/optics battery bundle:
CR123A 3V Lithium 10 pack w/ 5 pack of CR2032 lithium $25 shipped. Two for $40 shipped.
*Magpul cr2032 grip insert: 10 left
* AR Bolt Disassembly Jig: ~~7~~ 6 left
* Sba3 Extended storage insert ~~6~~ 5 left
* Sba3 Cr123 storage insert: ~~8~~ 5 left
PayPal FF Venmo Cashapp (no notes or comments)
Notes:
* These are the highest quality CR123 lithium just were requested to have unbranded wrappers. (Energizer) The CR2032 are Duracell lithium.
* Bolt Disassembly Jig for .223/5.56/.300. Easily remove the Extractor and Ejector springs. Jig has holes in the bottom for punching pins. Turn the dial to apply pressure to the Ejector spring so that the pin can be properly aligned for removal and installation. Extremely easy. Pm me for a 6.5/6.8 version. I have to swap plugs during assembly
* Sba3 insert is designed to maintain the shape of the soft rubber while being stored or transported, with an extended rear surface to allow vertical storage. Obviously has to be removed prior to use.
AR bolt disassembly jig below
Sba3 extended insert below
Sba3 cr123 insert below
Last edited:
