Rifle Scopes Ordered a gen 2 razor, now I need to mount the sucker... What do I get that works well?

[vincent7]

Ok, I just pulled the trigger on the big Gen2 Razor, and so now I also need a set of rings / a scope mount...

If at all possible I'd like a decent quality mounts / set of rings, but I'd like to avoid having to sell off a kidney just to get that scope mounted.

Any decent options under $100? Will be mounted on a Savage 10 action with Shilen varmint countour barrel.

 

[Kadams1563]

Umm Vortex PMR’s...

 

[RanchhandTCR]

I use American Rifle Company m10 rings hands down the best rings.

Im sure you can find a used set of vortex or seekins pmr rings.

You just dropped some good coing and dont want to spend more than $100 on rings. Is like buying a supercharged hell cat and putting 85 octane fuel in it

 

[Huskydriver]

Umm Vortex PMR’s...

Which are seekins just the op knows and quality.

Are you a one piece mount guy or split?

 

[ditter]

i have the same setup. Vortex Precision rings for me. But you'll have to increase your budget a bit.

 

[Steel head]

You just bought a great scope and now you want a Cracker Jack mount/rings?

Get some seekins/premium vortex rings at the least.
ARC M-10’s a awesome rings and a worthy option.

 

[DownhillFromHere]

The Hellcat-on-85-octane analogy is appropriate. Or buying a Vudoo .22 and shooting bulk ammo out of it.

The easy button is Vortex PMR rings. If you got the scope from Liberty, just get the rings there too. Don't make this harder than it needs to be - and for pete's sake don't buy a great scope and hamstring it with cheap mounts. The PMR rings are solid and reasonably priced.

 

[vincent7]

I hear you guys; not wanting to put Mickey Mouse rings on it, but if there's a good option without spending hundreds of dollars then 'why not'...

Most of you guys have been around precision shooting a lot longer then I've been, so I'm all ears. Below $100 equals garbage / trouble?

 

[DownhillFromHere]

Look. If you go back through my posts, you'll see I am not an in-your-face guy. I try to help. But what part of multiple people in this thread saying "Get the Vortex PMR rings" for $150 plus or minus is so hard to understand? Jeez, would you go buy a Corvette and go asking a thousand questions about how to put the cheapest tires possible on it?

If you're that hard up over $50, you probably overspent on the scope. Better to buy a Viper PST for a few hundred dollars less so you'll have money for decent rings to mount it.

 

[Kadams1563]

If your a poor (inside joke) your in the wrong sport. Lol $50 is nothing. Hell $500 is nothing in this style of shooting.

 

[OREGUN]

I like Badger Rings. They aren’t cheap. To put it another way, having low end rings will cause you no end of trouble...unreliable zero/dope, inexplicable fliers, damage to your scope, rings, etc...for the scope you now own, you owe it to yourself to mount it in a way that will inspire confidence. Everyone is going to have an opinion on what rings to use. I’ve used many pair of Badger rings with zero trouble, ever. If guys are pointing to the Vortex option, I would assume it’s a reasonable choice unless YOUR experience or someone YOU trust more says otherwise.

 

[jmw]

Arc

 

[Bigskyguy]

XLR makes good rings. I don't know why they're so cheap. I've had no problems at all with them.

 

[vincent7]

Look. If you go back through my posts, you'll see I am not an in-your-face guy. I try to help. But what part of multiple people in this thread saying "Get the Vortex PMR rings" for $150 plus or minus is so hard to understand? Jeez, would you go buy a Corvette and go asking a thousand questions about how to put the cheapest tires possible on it?

If you're that hard up over $50, you probably overspent on the scope. Better to buy a Viper PST for a few hundred dollars less so you'll have money for decent rings to mount it.

"is so hard to understand" & "asking a thousand questions" & "If you're that hard up over $50"

OK....

Why spend more if 'good is good'? I'm not strapped for cash, but I'm not going to spend more then I have to either. This is why i bought the Razor at Liberty Optics, and this is why after input from hide members I'm looking at AA optics for a set of refurb PMR rings. (they're out of 34mm, but I've got plenty of time before that Razor arrives anyway)


For me it's a hobby, not a pissing or bragging contest

 

[Blutroop]

Don’t listen to them high faluting rich label sellers.. use 550 cord. If you can’t find true 550 cord then there’s always duck tape and bailing wire. If your fix can’t fix the next thing that breaks down then your not doing it right. #poorsdoittoobutgovpaysforchildrens

 

[Bungi]

Seekins -- best value in my opinion.

Order them on Black Friday

 

[Bungi]

I just looked up the XLR rings (recommended above by Bigskyguy) -- Did not know XLR makes rings.

I'll bet those are good quality rings -- will consider trying them in the future.

 

[Blutroop]

550 is cheaper.. just saying

 

[vincent7]

I just looked up the XLR rings (recommended above by Bigskyguy) -- Did not know XLR makes rings.

I'll bet those are good quality rings -- will consider trying them in the future.

Yep, checked those out as well, they seem to be rebranded UTG pro rings (USA made). From what I've read so far on this forum they're actually pretty decent. Might try those on an Arken scope I have on order.

 

[KeithR41]

Find some used 1 inch Badgers in the PX. You’re welcome!

 

[nn8734]

Badger Ordnance, Seekins or Nightforce. Done.

Check the PX as you can sometimes find good deals on these and similar caliber rings. As others have stated, don’t cheap out on the rings or settle for “good enough” as your system is only as strong as its weakest link. Like you said, you’re relatively new at this. Take our advice. You will thank us later...

 

[GrumpyOleFart]

I got the Vortex rings as part of the package.
Mighty fine

 

[Shootin Stuff]

Which action?

Integral pic rail or dovetails?

ARC all the way for pic rail.

 

[357Max]

Well you have about 6 weeks to wait for scope, so buy rings during Black Friday sales.
I use SPUHR & ARC. That scope is a tank, you need to up your ring budget.
Make sure your pic rail is torqued/locktited down to the action before mounting.

For me it's a hobby, not a pissing or bragging contest

Since your not worried about bragging you could use one of these.
About $150 on BF sale

 

[Threadcutter308]

"is so hard to understand" & "asking a thousand questions" & "If you're that hard up over $50"

OK....

Why spend more if 'good is good'? I'm not strapped for cash, but I'm not going to spend more then I have to either. This is why i bought the Razor at Liberty Optics, and this is why after input from hide members I'm looking at AA optics for a set of refurb PMR rings. (they're out of 34mm, but I've got plenty of time before that Razor arrives anyway)


For me it's a hobby, not a pissing or bragging contest

Refurbished rings ?

Something tells me you’re in the wrong sport.

 

[Vaportrail22]

ARC M10

 

[M8541Reaper]

$100 will get you a set of badger or NF rings in the PX most days. You can’t go wrong with either.

 

[GrumpyOleFart]

May as well spend the pingers on good rings.
Get the best platform for that scope
Set up right the first time, you'll get years of service from it.

 

[celltech]

You bought a 34mm tube...welcome to 34mm tube accessory pricing. But if you have to save a few bucks then get the UTG Pro rings, as long as they fit. I think they save a few bucks by making them out of 6061 instead of 7075 and they are not quite as thick as the Vortex/Seekins rings. But they are made in the USA and punch way above their pricing. My only real complaint is the sizing. Their lowest set is a medium and its ~1.26", which is just too tall for me. A set of Vortex 34mm lows sold in the PX yesterday for $108....so keep looking.

 

[Shoots 700's]

Spend the money to get a good set. Lots of good recommendation. I like the ARC M10’s. I have a friend that does things on the cheap and spends twice as much in bullets because he misses so much.

 

[sparky702]

I have vortex PMR rings on my razor I got them last year on a Black Friday sale .by the time the smoke cleared to my door they were 115.00 . if you are in no Ruch I would wait for a Black Friday sale or get some rings from where you got the optic .

 

[vincent7]

Refurbished rings ?

Something tells me you’re in the wrong sport.

If paying more at shop A than shop B for the exact same product then yes, I'm in the wrong 'sport' I guess

It seems most recommend the Seekins / Vortex PMR rings.

I'll wait till black Friday and see what's offered, or perhaps some show up in the PX, or AA optics will stock more refurbished rings before that.

Wouldn't mind buying refurbished / used either.

 

[CrabsandFootball]

ARC M10 rings, the best money can buy. Don't cheap out on rings.

Just buy them, they are $180.

 

[AggieJack]

ARC M10 rings, the best money can buy. Don't cheap out on rings.

Just buy them, they are $180.

Likely be on sale on black Friday?

 

[CrabsandFootball]

Not sure, you could always call ARC and ask them. I don't usually see their stuff on sale but could care less, they are worth every penny.

The ease of mounting alone is worth it.

 

[ma smith]

It's important to keep perspective. You are also going to need other stuff to mount+zero the scope that cost money (eg, torque tools, levels, ammo...to name a few). Try to save the $50 elsewhere like saving 2.5% credit card fees x $2,000 optic by paying cash (or whatever)...or something like this (ie, that's doesn't impact peformance/investment but is arguably less convenient).

 

[vincent7]

It's important to keep perspective. You are also going to need other stuff to mount+zero the scope that cost money (eg, torque tools, levels, ammo...to name a few). Try to save the $50 elsewhere like saving 2.5% credit card fees x $2,000 optic by paying cash (or whatever)...or something like this (ie, that's doesn't impact peformance/investment but is arguably less convenient).

No worries, have the right tools to mount the scope Now just need to find out the right ring height to order once i order...

Rifle Scopes - Vortex / Seekins PMR ring height for mounting 4.5-27 razor gen 2?

Ok, so it looks like I narrowed down my ring choice for the Razor 4.5-27 gen2 which I just ordered. Next question would be which ring height I would be able to get away with. The rifle this will be mounted on a savage 10 action with this stock...

www.snipershide.com

 

[Shoots 700's]

If paying more at shop A than shop B for the exact same product then yes, I'm in the wrong 'sport' I guess

It seems most recommend the Seekins / Vortex PMR rings.

I'll wait till black Friday and see what's offered, or perhaps some show up in the PX, or AA optics will stock more refurbished rings before that.

Wouldn't mind buying refurbished / used either.

i couldnt wait thta long to mount it all up. Black Fridat is like 2 weeks from now.

 

[AggieJack]

ARC confirmed they are not having a Black Friday sale for anyone curious.

 

[vincent7]

If paying more at shop A than shop B for the exact same product then yes, I'm in the wrong 'sport' I guess

It seems most recommend the Seekins / Vortex PMR rings.

I'll wait till black Friday and see what's offered, or perhaps some show up in the PX, or AA optics will stock more refurbished rings before that.

Wouldn't mind buying refurbished / used either.

i couldnt wait thta long to mount it all up. Black Fridat is like 2 weeks from now.

Just ordered the scope, from what I understand it takes 4-5 weeks before I receive it, so there's time.

 

[M8541Reaper]

Hey OP...

Accessories - SOLD

WTS 34mm Badger Rings 1.375” $105 shipped, PayPal only. Gift, or regular plus fee (buyer pays fee). Will accept the following trades: - 6.5mm 140 ELD-Ms - .30 cal 208 ELD-Ms - AICS/Accurate Mag/ARC 308 mags - AICS/Accurate MAg 300WM CIP length mags - Lancer 20rnd 308/7.62 mags

www.snipershide.com

Boom. $105 shipped. 34mm rings, 1.375” height.
(Not affiliated with the seller, I just happen to be browsing and it popped up)

 

[Steel+Killer]

If you ain't got a SPUHR mount you aint got shit go be poor somewhere else!

 

[Halfnutz]

@vincent7 PM sent.

 

[accurate obsession]

I understand where you're at but if you go too cheap in the end you'll pay more after buying the cheap then good ones. Nightforce ultralites will help offset the fact that the gen 2 is a brick.

 

[JC0352]

$134 at sport optics

https://www.sportoptics.com/vortex-scope-rings-pmr-34-100.aspx

 

[CRT2]

No worries, have the right tools to mount the scope Now just need to find out the right ring height to order once i order...

Rifle Scopes - Vortex / Seekins PMR ring height for mounting 4.5-27 razor gen 2?

Ok, so it looks like I narrowed down my ring choice for the Razor 4.5-27 gen2 which I just ordered. Next question would be which ring height I would be able to get away with. The rifle this will be mounted on a savage 10 action with this stock...

www.snipershide.com

Call Vortex and they will help you determine the correct ring height. Takes 5 minutes and we’ll worth your time. They’ve done this a few times.

 

[Shoots 700's]

Why so long to receive the scope

 

[357Max]

He ordered from Liberty optics during Veterans day sale. I did as well & it was 6 week ship time from date of order.
They are one of the many great venders here & up front about lead times.

If you want Vortex, Liberty's your Huckleberry.

 

[giantsfall]

I wouldn’t hesitate to use Hawkins Precision rings.

Andy is good people with top quality products and they’re super affordable.

 

[357Max]

The pic rail on my ARC M7 action is .100 higher then the Nucleus. So I'll probably be mounting my G2 in this Cadex 1.250".
They aren't cheap though........$275ish.
Don't here much about them, but appears to be a well built mount.