Paint colors? Rattlecan Paint?

[Shootermagavin]

Liking the color scheme here between the two different 'browns'. I realize they're cerakoted, but does anyone know what colors these might be close to and if they're available in rattle-can/spray paint?

 

[Cummins06]

I'm going to be painting my AR this weekend and struggling on what colors to choose. Was thinking a desert tan, army green, and brown.

 

[Taylorbok]

light brown and dark brown. DUH

 

[stello1001]

Pretty sure I used rustoleum 2x satin nutmeg on this barreled action. Should get you close.

 

[Aftermath]

light brown and dark brown. DUH

And that wet look = exxxtra sexxxy

 

[jwood1284]

The stock looks like it’s just tan and brown. The action cerakote looks like it’s either Coyote or RAL8000.

 

[mark5pt56]

The only things missing In the pic are a flat brimmed hat and an energy drink to go with that evian soaked rifle.

 

[Trigger Monkey]

There's four colors/shades that I see. "Coyote" on the barreled action and a mix of "coyote", green, brown, and fde/tan on the stock.

In rattle can form I'd use Rustoleum Nutmeg on the barreled action as mentioned above. On the stock, I'd use Rustoleum Camo Earth Brown, Khaki, and Deep Forest Green with spritzes of Nutmeg. Then finish the whole thing off with several coats of matte clear.

 

[stello1001]

There's four colors/shades that I see. "Coyote" on the barreled action and a mix of "coyote", green, brown, and fde/tan on the stock.

In rattle can form I'd use Rustoleum Nutmeg on the barreled action as mentioned above. On the stock, I'd use Rustoleum Camo Earth Brown, Khaki, and Deep Forest Green with spritzes of Nutmeg. Then finish the whole thing off with several coats of matte clear.

This probably as solid advice as can be. I do all my rifles with rattlecan so I know a thing or two and I'd take the same route.