Pre-Fit Your Barrel Blank(BarrelWork)

[FisherT&C]

Hello Everybody,

You're welcome to send in your action to have the barrel timed.

Here is the shouldered Pre-Fit List:

Accuracy International no wrench flats (M27x2.0) (M30x2.0)
American Rifle Company
Curtis
Defiance Machine
Impact 737R
Kelbly's Atlas,Prometheus & Nanook
Lone Peak
Pure Precision
Sig SSG 3000 with Benchmark Extension
Terminus
Tikka
Zermatt
Updated Contact Info: 406-539-4684
Phone Hours: Monday, Wednesday & Friday 12 PM until 1:30 PM
Mountain Standard Time.
Email: [email protected]
I try to answer emails first thing in the morning or during lunch.
Prices are here: https://www.fishertandc.com/barrelwork
CAGE Code: 9SLZ8
Reamers are here: https://www.fishertandc.com/reamers
Shipping Info: https://www.fishertandc.com/shipping

Pre-Fit Your Barrel Blank — Fisher T and C

Send in or drop ship your barrel blank to be pre-fit to your action. Barrels are inspected for bore uniformity and reverse taper prior to turning, threading and reaming. The bore is indicated to within .0001” at the transition of the throat to the lands and grooves with direct contact of a dial t

www.fishertandc.com

Barrel Your Action — Fisher T and C

Send in your action and barrel to be threaded, timed, chambered and crowned. Barrels are inspected for bore uniformity and reverse taper prior to turning, threading and reaming. The bore is indicated to within .0001” at the transition of the throat to the lands and grooves with direct contact of

www.fishertandc.com

Thanks for looking,
Chase

 

[Baron85]

Fisher T&C did a barrel for me last year and it hammered. Ended up selling the rifle but planning on using him again in the future.

I had an issue with my barrel that was caused by me and Fisher was amazing and went out of his way to help me resolve MY issue. Want to reinstate the fact that it was my problem not and issue with his work.

 

[Average guy]

Do you have a 6br norma reamer

 

[FisherT&C]

Do you have a 6br norma reamer

Yes, .273" neck, .094" or .120" freebore.

 

[Mike Casselton]

Uh, oh. Somebody is about to have some fun with a short stubby cartridge.

 

[Average guy]

Uh, oh. Somebody is about to have some fun with a short stubby cartridge.

Thinking ahead. But yes I need another

 

[Mike Casselton]

I'm thinking how nice a CDG and another BR would be too.
Then another CDG for a magnum of some sort for mile plus stuff.

I still have to get my 30 BR done before I proceed on the next project.


Chase,
Have you done any pre-fits on the Kauger actions?

 

[xfyre101]

do we have to send you the barrels? or can you order and do the prefit for us?

 

[FisherT&C]

do we have to send you the barrels? or can you order and do the prefit for us?

Either way, you can send in a barrel or I can source one.

 

[TheOE800]

Thinking about doing barrels for the new coned breech ARC action?

 

[FisherT&C]

Thinking about doing barrels for the new coned breech ARC action?

Yes, once a print is released or I get an action in hand.

 

[AK74U]

PM inbound.

 

[021411]

Sent Fisher T&C my take off Axiom barrel (Bartlein) and had him re-spin it up for my Kelbly Prometheus. The barrel was rechambered as well and rethreaded up front. Got the barrel back in a very reasonable time. The barrel headspaced perfectly without even having my action.
Below are two consecutive groups within the first 20 rounds after a hasty zero. Yes I know it’s not a 5x5. Ammo used was Hornady Black 140gr. Fisher T&C is definitely good to go.

 

[FisherT&C]

Pre-Fit Your Barrel Blank — Fisher T and C

Send in or drop ship your barrel blank to be pre-fit to your action. Barrels are inspected for bore uniformity and reverse taper prior to turning, threading and reaming. The bore is indicated to within .0001” at the transition of the throat to the lands and grooves with direct contact of a dial t

www.fishertandc.com

 

[FNG1001]

@FisherT&C Interested in learning more about Bergara Premier rebarrels. Whats your opinion on the work needed to get a barrel cut for these actions, and s the cone shape necessary?

 

[FisherT&C]

@FisherT&C Interested in learning more about Bergara Premier rebarrels. Whats your opinion on the work needed to get a barrel cut for these actions, and s the cone shape necessary?

The cone is really just a tapered recess. You could get away with a flat breech as long as you cut the tenon short enough for bolt clearance.

 

[FredHammer]

What's the current wait times?

 

[FisherT&C]

What's the current wait times?

5 weeks

 

[FisherT&C]

Pre-Fit Your Barrel Blank — Fisher T and C

Send in or drop ship your barrel blank to be pre-fit to your action. Barrels are inspected for bore uniformity and reverse taper prior to turning, threading and reaming. The bore is indicated to within .0001” at the transition of the throat to the lands and grooves with direct contact of a dial t

www.fishertandc.com

 

[FisherT&C]

Reamers, Pre-Fits and Price List attached.

 

[Lawnboi]

Glad to see another smith offering tikka prefits.

Do you contour the shank on a tikka prefit? Say if it’s a 1.2” diameter do you take it down like others?

 

[FisherT&C]

Glad to see another smith offering tikka prefits.

Do you contour the shank on a tikka prefit? Say if it’s a 1.2” diameter do you take it down like others?

Usually I do not turn down the shank for a Tikka, I'll put a heavy chamfer at the shoulder so there's no protruding edge. I've done it a few times at a customer's request if the profile is light enough to make it work. Tac A1s need it to fit through the Handguard Assembly Bracket. I run an NBRSA taper on mine in a wide open chassis without issue.

 

[FisherT&C]

Use code HIDEMEMBER for $50 off through Sep 1, 2023.

Pre-Fit Your Barrel Blank — Fisher T and C

Send in or drop ship your barrel blank to be pre-fit to your action. Barrels are inspected for bore uniformity and reverse taper prior to turning, threading and reaming. The bore is indicated to within .0001” at the transition of the throat to the lands and grooves with direct contact of a dial t

www.fishertandc.com

 

[FisherT&C]

I've been trying Winchester Sta-Ball Match with 107-SMK in my 6BR (FTC) chamber.
Weighed charges.

Thrown Charges at 29.1-29.2 grains

 

[FisherT&C]

HIDEMEMBER code expires Sep 1, 2023, get $50 off.

 

[AK74U]

Ordered a Kreiger barrel from Fisher T&C. Had an initial issue at the beginning and they corrected the issue with no problems. Finally took it out to the range yesterday and qualified at Talladega CMP using FMJ Aguila out to 600 yards. Great guys!!
Kreiger barrel was for a AI AXSA .308Win 30 inch barrel.

 

[Schw15]

Does great work don't hesitate using him. Great communication and he's pretty fast at getting barrels out. I've had issues with a few prefits in past and his came perfect and the multiple barrels same cals were pretty much dead on between the two.

 

[FisherT&C]

Use code HIDESHIP for free economy return shipping on orders over $250.

 

[Dezurtrat]

Fisher T&C has been a pleasure to work with. Placed my order online, shipped my barrel out the next day. Just received it in the mail today so a 2 1/2 week turn around! Can't wait to mount it up and send some lead. Thanks again Fisher T&C

 

[FisherT&C]

Veteran's Day Discount
USAVET get 11% off
Valid thru 12 Nov 23

 

[FisherT&C]

10% off chamber and thread your barrel blank.
ADUK4HL starts NOV 24 ends NOV 27

Sources for Blanks:
Front Range Precision @Front Range Precision (Proof Research)
Southern Precision Rifles @Bugholes (Bartlein, Krieger, Brux, Mullerworks)
Patriot Valley Arms @bohem (Osprey)

Others:
Redhawk Rifles
Bullet Central
Bruno Shooters Supply
OTM Tactical

Pre-Fit Your Barrel Blank — Fisher T and C

Send in or drop ship your barrel blank to be pre-fit to your action. Barrels are inspected for bore uniformity and reverse taper prior to turning, threading and reaming. The bore is indicated to within .0001” at the transition of the throat to the lands and grooves with direct contact of a dial t

www.fishertandc.com

 

[GBMaryland]

FWIW:

I had a 30 inch rock Creek 1000 yard profile 6.5 barrel chambered and finished, and they did a flawless job.

Turnaround time was a week which was fantastic.

 

[18Echo]

Can you prefit an impact 787 long action receiver? I only saw the 737 on your website.

 

[FisherT&C]

Can you prefit an impact 787 long action receiver? I only saw the 737 on your website.

I just recently obtained the tenon print. I got it added to the website.

 

[FisherT&C]

ADUK4HL We're still live. 10% chambering your barrel blank.


https://www.fishertandc.com/barrelwork/p/chamber-barrel-blank

 

[18Echo]

Barrel job ordered! Will ship my blank first thing next week! Thanks!

 

[FisherT&C]

Barrel job ordered! Will ship my blank first thing next week! Thanks!

Thank you very much!

 

[ST42]

My Blank is enroute. Hopefully there today or tomorrow.

 

[FisherT&C]

Blanks in stock for PreFits.

Proof Research Comp PreFit .224, 7 Twist — Fisher T and C

Proof Research Competition Profile single point cut 4 groove conventional rifling, max finished length of 28”; 416R Stainless Steel. Click on Options/Add to Cart to select action, chamber and threads.

www.fishertandc.com

Bartlein MTU 6mm 7.5 Pre-Fit — Fisher T and C

Single point cut 5R rifling 416R Stainless Steel, Max finished Length is 30”, approximate weight is 6.9lbs. Click on Options/Add to Cart to select chamber, threads and length.

www.fishertandc.com

Proof Research Comp PreFit 6mm 7.5 Twist — Fisher T and C

Proof Research Competition Profile single point 4 groove convention cut rifling, maximum finished length 28” 416R Stainless. Click on Options/Add to Cart to select action,chamber and threads.

www.fishertandc.com

Proof Research Comp PreFit 6.5mm 8 Twist — Fisher T and C

Proof Research Competition Profile single point cut 5 groove conventional rifling, max finished length of 28”; 416R Stainless Steel. Click on Options/Add to Cart to select action,chamber and threads.

www.fishertandc.com

 

[FisherT&C]

Updated Contact Info: 406-539-4684
Phone Hours: Monday & Tuesday 9:15-10:15AM
Mountain Standard Time.
Email: [email protected]
I try to answer emails first thing in the morning or during lunch.
Prices are here: https://www.fishertandc.com/barrelwork
Reamers are here: https://www.fishertandc.com/reamers
Shipping Info: https://www.fishertandc.com/shipping

 

[FisherT&C]

Updated prefit list attached.
Recent additions:

• 22 ARC Hornady
• 25 Creedmoor Berger/ELDM
• Pure Precision Actions

 

[Baron85]

Sending a proof carbon and nanook action in. Excited for a second barrel from Chase!

 

[levi8599]

Sent in a 20” cf proof and 10 rds in, with leftover loads from a previous barrel, it started shooting clover leaves already. Great price and great turn around as well.

 

[FisherT&C]