- Rem 700 Action
- Criterion Remage .223 Match Chamber 1:7 twist
- NSS Remage Recoil Lug and Barrel Nut
- Wyatt's Detachable Box Magazine Bottom Metal
- 10 Round magazine (allows for very long COAL)
- Bell and Carlson Medalist M40 Stock
- TriggerTech Special Single Stage Flat
- Warne 515M Maxima Rings
- Weaver Mounts 20 MOA Rail
- Vortex Diamondback Tactical FFP 6-24x50 MOA
- Hornady FL Die Set w/ Microjust seating stem and ELD insert
- 3 Full and one half box of Berger VLD 80 Gr.
- Half box Hornady 73 Gr. ELDM, other half is loaded up for testing.
Built this last winter, thought I would shoot it a lot more than I ended up doing.
Properly headspaced with gauges, and torqued to spec.
Looking to sell all together if possible. If there is something you want to leave out like the scope or dies we can discuss. Just not looking to pull barrel etc. unless I need to.
Barrel has about 150 - 200 rounds through it. Stainless finish. I just spray painted for purely aesthetic purposes. I didn't sand the steel before painting, so it should be easy to remove if needed.
The 80 Gr Bergers needed a bit of JB Weld Putty on the feed ramp to feed properly. They feed very well now. If you don't want it, should be easy enough to remove. Shown in picture.
Ships in brand new hard case.
$2,000 plus shipping to CONUS.
Please make sure your FFL will accept transfers from private individuals.
Feel free to ask any questions.
- Criterion Remage .223 Match Chamber 1:7 twist
- NSS Remage Recoil Lug and Barrel Nut
- Wyatt's Detachable Box Magazine Bottom Metal
- 10 Round magazine (allows for very long COAL)
- Bell and Carlson Medalist M40 Stock
- TriggerTech Special Single Stage Flat
- Warne 515M Maxima Rings
- Weaver Mounts 20 MOA Rail
- Vortex Diamondback Tactical FFP 6-24x50 MOA
- Hornady FL Die Set w/ Microjust seating stem and ELD insert
- 3 Full and one half box of Berger VLD 80 Gr.
- Half box Hornady 73 Gr. ELDM, other half is loaded up for testing.
Built this last winter, thought I would shoot it a lot more than I ended up doing.
Properly headspaced with gauges, and torqued to spec.
Looking to sell all together if possible. If there is something you want to leave out like the scope or dies we can discuss. Just not looking to pull barrel etc. unless I need to.
Barrel has about 150 - 200 rounds through it. Stainless finish. I just spray painted for purely aesthetic purposes. I didn't sand the steel before painting, so it should be easy to remove if needed.
The 80 Gr Bergers needed a bit of JB Weld Putty on the feed ramp to feed properly. They feed very well now. If you don't want it, should be easy enough to remove. Shown in picture.
Ships in brand new hard case.
$2,000 plus shipping to CONUS.
Please make sure your FFL will accept transfers from private individuals.
Feel free to ask any questions.