Night Vision PSQ-20b Fusion monocular *SPF*

[Surgeon_Shooter]

Hello Hide,

I have a nice PSQ-20b that I’ve used for about a year now. This was built by me with 100% spare parts. The image intensifier is an 18um L3 unfilmed WP with zero blems. I have the full kit for this that includes the following:

PSQ-20b
Helmet mount
Helmet strap with base mount
Battery pack
Tube data sheet
Hard case
Lens caps

**price: $10,500**
Ridiculously cheap for this item. This is no Jerry F or coti strapped to a pvs-14, it’s much better built and performs how it should.

I am offering a 1 year warranty on this unit and lifetime warranty on service. This was collimated on a DART set, the DART set is specifically designed to align the thermal and night vision images so you don’t have 2 separate images.

Please don’t mind the guy wearing a thong under his Crye pants…. It’s 2022 and I guess that’s how he gets down.

Please feel free to call or text me anytime at the number below.

Thanks
Jay
Sure Shot Night Vision
8three2-7seven3-7zero03

 

[Roman1]

Do these use the same intensifier tube as a pvs 14 are they interchangeable?

 

[Jong]

Do these use the same intensifier tube as a pvs 14 are they interchangeable?

No

 

[Roman1]

No

Do you happen to know what intensifier tubes work with these housing want to build some possibly but can’t find any info on what tube it takes

 

[TheHorta]

Do you happen to know what intensifier tubes work with these housing want to build some possibly but can’t find any info on what tube it takes

Talk to Jay (SureShot NV, the OP). He likely has more experience dismantling and reassembling these units than all of L3 combined.

 

[Surgeon_Shooter]

No

Yes they do. MX11769 tubes are used in these units. The EGAC is way different however and the tubes have a twist stop and tunnel epoxied on to them. If you replace the EGAC then remove the tunnel/ twist stop, they will function perfectly in a pvs-14.

 

[Surgeon_Shooter]

Talk to Jay (SureShot NV, the OP). He likely has more experience dismantling and reassembling these units than all of L3 combined.

Thanks for the kind words fella!

 

[Surgeon_Shooter]

Do you happen to know what intensifier tubes work with these housing want to build some possibly but can’t find any info on what tube it takes

Not trying to discourage you sir but building these are a bit more involved than you may think. If you get one fully assembled and get it to power on correctly, you’re going to run into the collimation issue. The thermal/ night vision will not overlay properly and you will have double vision. This can only be fixed with a DART collimation system.

Message me if you have any questions
Jay