I'd like to rebarrel a Remington 700 with a match .308 tube. I am not too thrilled about waiting most of the year to get my gun back but I do want decent work done. Any suggestions on what barrelmaker I should use considering quality and wait times? I'm also wondering if my best bet is to just drop my gun off at the gunsmith, explain what I want, and let him take care of it... Thanks
Quality rebarrel ASAP?
- Thread starter KimberTac
- Start date
Re: Quality rebarrel ASAP?
Call GA Precision, I'd bet they have a Bartlein in stock and should be able to turn you around pretty quick.......
Call GA Precision, I'd bet they have a Bartlein in stock and should be able to turn you around pretty quick.......
Re: Quality rebarrel ASAP?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DRA-M40A1</div><div class="ubbcode-body">Call GA Precision, I'd bet they have a Bartlein in stock and should be able to turn you around pretty quick....... </div></div>
^^this
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DRA-M40A1</div><div class="ubbcode-body">Call GA Precision, I'd bet they have a Bartlein in stock and should be able to turn you around pretty quick....... </div></div>
^^this
Re: Quality rebarrel ASAP?
There are several smiths on this site that can turn you around in less than a year. Just do a little looking.
File out your profile and maybe someone can tell you of a local smith that you can use that would work for you. I personally work with the bigger smiths on complete projects, but smaller stuff like rebarrels and action truing can be done by any quality smith. My local smith is as good as they come.
You may also want to touch base with Ozzie over at Saurez Tactical. He recently posted that he can get you turned around pretty quick. He also noted that he had some top end barrels in stock. The post was in the vendor forum (or whatever it is called) in the exchange section. I am working up a build with him and he is communicating with me very well which is a big deal to me. Contact him or someone local if you want a fast turn around.
There are several smiths on this site that can turn you around in less than a year. Just do a little looking.
File out your profile and maybe someone can tell you of a local smith that you can use that would work for you. I personally work with the bigger smiths on complete projects, but smaller stuff like rebarrels and action truing can be done by any quality smith. My local smith is as good as they come.
You may also want to touch base with Ozzie over at Saurez Tactical. He recently posted that he can get you turned around pretty quick. He also noted that he had some top end barrels in stock. The post was in the vendor forum (or whatever it is called) in the exchange section. I am working up a build with him and he is communicating with me very well which is a big deal to me. Contact him or someone local if you want a fast turn around.
Re: Quality rebarrel ASAP?
Mac @ mt guns. Builds a lot of competition bench rest rifles. If he has a bartlein in stock, he would have a quick turnaround. He is also one of the more reasonablly priced smiths. Pm me if you want to know about the work he did for me.
Mac @ mt guns. Builds a lot of competition bench rest rifles. If he has a bartlein in stock, he would have a quick turnaround. He is also one of the more reasonablly priced smiths. Pm me if you want to know about the work he did for me.
Re: Quality rebarrel ASAP?
Don't avoid the wait, buy a second rifle. It's not uncommon to have one rifle(or more) "in the shop".
Good luck
Jerry
Don't avoid the wait, buy a second rifle. It's not uncommon to have one rifle(or more) "in the shop".
Good luck
Jerry
Re: Quality rebarrel ASAP?
I would be more concerned with getting a barrel. This is usually what holds a lot of build up. Find a quality blank from any of the top makers and then choose a smith. Most smiths prefer to use one barrel maker but like before, this is what holds them up. Any good barrel will shoot as good as you would expect as long as the smith knows what he's doing. There are plenty of guys here besides GAP that can do this work just as good and have it back to you pretty quickly
I would be more concerned with getting a barrel. This is usually what holds a lot of build up. Find a quality blank from any of the top makers and then choose a smith. Most smiths prefer to use one barrel maker but like before, this is what holds them up. Any good barrel will shoot as good as you would expect as long as the smith knows what he's doing. There are plenty of guys here besides GAP that can do this work just as good and have it back to you pretty quickly
Re: Quality rebarrel ASAP?
Hart Rifle Barrels http://www.hartbarrels.com/rebarreling.php
They can sometimes turn stuff pretty quick.
Hart Rifle Barrels http://www.hartbarrels.com/rebarreling.php
They can sometimes turn stuff pretty quick.
Re: Quality rebarrel ASAP?
call mark @ short action customs, i know he sometimes has a selection of .308 barrels in stock. pretty quick turnaround too.
http://www.shortactioncustoms.com/
call mark @ short action customs, i know he sometimes has a selection of .308 barrels in stock. pretty quick turnaround too.
http://www.shortactioncustoms.com/
Re: Quality rebarrel ASAP?
I have a Keiger .30 caliber HV contour, 1:11 twist in stock needing a rifle to be machined to.
I have a Keiger .30 caliber HV contour, 1:11 twist in stock needing a rifle to be machined to.
Similar threads
