Accessories Rare breed triggers are in stock and $380....

[voytek198]

Just a heads up folks. In stock and $380 dollars. I've noticed they restock once or twice a week.
If this is against forum rules I'm sure someone will let me know.

FRT - 15

FRT - 15 Customized Firearm Trigger

www.rarebreedtriggers.com

 

[Ravenyzf-r6]

Thanks for posting this. Prices for these are out of control right now. It’s essentially a bump trigger, and we know what happened to the last “bump” accessory used on an AR. Can’t imagine these will be far behind. Feel (kinda) bad for the guy spending $800 on one just to have it added to the no-no list.

 

[craigos]

well they went quick

 

[Gommer]

well they went quick

Back in stock right now

 

[Elnino31]

They were in stock yesterday at one point too.

I thought is was odd that someone would pay $800 without a quick google search ... but to each his own.

I do believe there’s about a 1% chance these make it to the end of the year without being singled out by an executive order

You’d be better off taking that $800 and buying Bitcoin. There’s probably a 2% chance it will be worth the price of a MG in 5 years

 

[Gommer]

They were in stock yesterday at one point too.

I thought is was odd that someone would pay $800 without a quick google search ... but to each his own.

I do believe there’s about a 1% chance these make it to the end of the year without being singled out by an executive order

You’d be better off taking that $800 and buying Bitcoin. There’s probably a 2% chance it will be worth the price of a MG in 5 years

Anyone who's considering shooting large volumes of ammo right now probably isn't worried about the cost of the trigger.

As for the legal side... again I'd make an ammo reference. If the courts say destroy it.. I mean, it's like a few mags of ammo in cost at today's prices.

 

[KZP]

If you get one, search youtube for frt15 mod. They have a design flaw that destroys one of the springs after a few mags. Using a Dremel to cut a small area prevents this problem. Company so far refuses to acknowledge the issue.

 

[Wb7]

Ordered early this morning and have a shipping notification in the email. Was not expecting that!

 

[AngryKoala]

If you get one, search youtube for frt15 mod. They have a design flaw that destroys one of the springs after a few mags. Using a Dremel to cut a small area prevents this problem. Company so far refuses to acknowledge the issue.

Yup, exactly why I won't buy one.

 

[Ravenyzf-r6]

In stock right now. Don’t buy over priced crap on here!

 

[craigos]

i have seen many boards where they are sending out in stock notifications randomly to people signed up so there is better chance everyone has a chance to get one. btw gb has many - and not $800

 

[Ravenyzf-r6]

In stock now at https://www.bigdaddyunlimited.com/rare-breed-triggers-frt-15-bdu/?from403=1

Easy .99c trial to buy and cancel when done. Worked great for me.

Don’t pay ridiculous $$ for these when new stock is always popping up. Just be patient and check sites a few times a day.

 

[AngryKoala]

In stock now at https://www.bigdaddyunlimited.com/rare-breed-triggers-frt-15-bdu/?from403=1

Easy .99c trial to buy and cancel when done. Worked great for me.

Don’t pay ridiculous $$ for these when new stock is always popping up. Just be patient and check sites a few times a day.

Hey can you check to see if they have a archon type b pistol please....yes I'm too much of a cheap ass to pay the 0.99 to check lol.

 

[Ravenyzf-r6]

Hey can you check to see if they have a archon type b pistol please....yes I'm too much of a cheap ass to pay the 0.99 to check lol.

Lol I understand that. Shows out of stock.

 

[AngryKoala]

Lol I understand that. Shows out of stock.

Thank you for checking. I can't find that pistol anywhere except gunjoker.

 

[flandersfields]

restocked again, I can't understand the clowns paying a premium on these, they add literally every day: https://www.rarebreedtriggers.com/product/frt-15-br/

 

[Ravenyzf-r6]

In stock at Big daddy unlimited and they have a .99c first month membership that is easy to cancel after you order. Where I got mine from and shipping was fast.

 

[flandersfields]

They're back yet again

 

[Ruslow]

OK curious as to how they work o they slam fire. since the trigger is not held till bolt is completely closed. It just follows the bolt?

 

[flandersfields]

the video on this page kind of explains it, still somewhat over my head: https://www.rarebreedtriggers.com/product/frt-15-br/

 

[flandersfields]

OK curious as to how they work o they slam fire. since the trigger is not held till bolt is completely closed. It just follows the bolt?

the video on this page kind of explains it, still somewhat over my head: https://www.rarebreedtriggers.com/product/frt-15-br/

 

[Ravenyzf-r6]

Still in stock at big daddy unlimited.

 

[flandersfields]

back in stock here, too: https://www.rarebreedtriggers.com/product/frt-15-br/

 

[flandersfields]

I bought two more Friday and they got here today, if nothing else, those guys ship fast AF

 

[Swamplife]

Ordered one from Rarebreed. They charged $22.85 for ground shipping in a padded envelope, took 7 days to get to me. Actual shipping was probably $5.00 tops. I just sent a Fostech Echo in a padded envelope and it was $4.95. I figured for the $22.85, it would be coming 2nd day air in a box. The Rarebreed’s are easily obtained now, I’d try a vendor to purchase and maybe save $15.00 on shipping.

 

[flandersfields]

Ordered one from Rarebreed. They charged $22.85 for ground shipping in a padded envelope, took 7 days to get to me. Actual shipping was probably $5.00 tops. I just sent a Fostech Echo in a padded envelope and it was $4.95. I figured for the $22.85, it would be coming 2nd day air in a box. The Rarebreed’s are easily obtained now, I’d try a vendor to purchase and maybe save $15.00 on shipping.

I'm grabbing ones for my teenagers, which vendors have them in stock? They're back in stock on the leaked waitlist link: https://www.rarebreedtriggers.com/product/frt-15-br/ but still charging $20 shipping

 

[flandersfields]

anybody seen this? side by side of the original vs current model, seems to be a mod to address that spring crimp thing

 

[Swamplife]

I'm grabbing ones for my teenagers, which vendors have them in stock? They're back in stock on the leaked waitlist link: https://www.rarebreedtriggers.com/product/frt-15-br/ but still charging $20 shipping

Try here:

https://www.bigdaddyunlimited.com/rare-breed-triggers-frt-15-bdu/?from403=1

 

[flandersfields]

I just saw your post, ended up grabbing one here this morn https://www.rarebreedtriggers.com/product/frt-15-br

 

[Joshcole]

Any left?

 

[flandersfields]

Any left?

yes but not on home page, this is the leaked waitlist link: https://www.rarebreedtriggers.com/product/frt-15-br gotta use that one. I already got tracking from my order placed earlier today!

 

[flandersfields]

wonder if the ATF is ignoring these because they think this will pass and self-resolve: https://www.primaryarms.com/atf-proposal-2021r05

 

[Ravenworks]

If you get one, search youtube for frt15 mod. They have a design flaw that destroys one of the springs after a few mags. Using a Dremel to cut a small area prevents this problem. Company so far refuses to acknowledge the issue.

So stop regurgitating bullshit you see on the internet.
This was real easy to find with a quick Duck Duck search

"We made an inline change on 3/1 to address the issue that some people were having with their locking bar springs kinking. The modification in triggers shipping since then is a very small bevel in the housing where the locking bar spring fits into the housing. The bevel creates more space for the spring to fit into the housing without having a kinking problem. The modified locking bar is the solution for people who purchased their trigger prior to the 3/1 housing mod. It wouldn't hurt to put a modified locking bar into a modified trigger, but it isn't necessary. And just as an FYI, people who purchased prior to 3/1 have the option to send their trigger back to us to have the locking bar replaced free of charge.

Let me know if you have any other questions and/or feedback!

Thanks for reaching out, and most of all, thank you for your support!"

 

[flandersfields]

So stop regurgitating bullshit you see on the internet.

"We made an inline change on 3/1 to address the issue that some people were having with their locking bar springs kinking. The modification in triggers shipping since then is a very small bevel in the housing where the locking bar spring fits into the housing. The bevel creates more space for the spring to fit into the housing without having a kinking problem. The modified locking bar is the solution for people who purchased their trigger prior to the 3/1 housing mod. It wouldn't hurt to put a modified locking bar into a modified trigger, but it isn't necessary. And just as an FYI, people who purchased prior to 3/1 have the option to send their trigger back to us to have the locking bar replaced free of charge.

Let me know if you have any other questions and/or feedback!

Thanks for reaching out, and most of all, thank you for your support!"

thank you! My experience with them has been nothing but pleasant, and as I think I mentioned, I have one of the earlier triggers with a ton of rounds down range now and zero issues from it. Still got the newer ones just because, but I don't think that "issue" was nearly as prevalent as a couple of loud mouths made it seem.

 

[Ravenworks]

Ordered one from Rarebreed. They charged $22.85 for ground shipping in a padded envelope, took 7 days to get to me. Actual shipping was probably $5.00 tops. I just sent a Fostech Echo in a padded envelope and it was $4.95. I figured for the $22.85, it would be coming 2nd day air in a box. The Rarebreed’s are easily obtained now, I’d try a vendor to purchase and maybe save $15.00 on shipping.

They are only available from Rarebreedtriggers

 

[KZP]

So stop regurgitating bullshit you see on the internet.
This was real easy to find with a quick Duck Duck search

"We made an inline change on 3/1 to address the issue that some people were having with their locking bar springs kinking. The modification in triggers shipping since then is a very small bevel in the housing where the locking bar spring fits into the housing. The bevel creates more space for the spring to fit into the housing without having a kinking problem. The modified locking bar is the solution for people who purchased their trigger prior to the 3/1 housing mod. It wouldn't hurt to put a modified locking bar into a modified trigger, but it isn't necessary. And just as an FYI, people who purchased prior to 3/1 have the option to send their trigger back to us to have the locking bar replaced free of charge.

Let me know if you have any other questions and/or feedback!

Thanks for reaching out, and most of all, thank you for your support!"

Other customers had a different experience past 3/1. Regardless, they modified the design since my post.

 

[Ravenworks]

Other customers had a different experience past 3/1. Regardless, they modified the design since my post.

So did you write them?
Do you know who owns Rarebreed?
Little search foo would help you get yours fixed instead of posting up videos.

They figured it out from input from people thst were unhappy.

 

[KZP]

So did you write them?
Do you know who owns Rarebreed?
Little search foo would help you get yours fixed instead of posting up videos.

They figured it out from input from people thst were unhappy.

I do not own one, did not write them. If that is the standard to have knowledge of product & customer service issues then listening to your post is useless as well, because everyone who didn't write in or own one is disqualified to trust yours.

Not sure what knowing who the owner is has to do with anything, or why you are worried over a post that is months old that can be backed with testimony from numerous sources at the time that post was made.

 

[flandersfields]

I do not own one, did not write them. If that is the standard to have knowledge of product & customer service issues then listening to your post is useless as well, because everyone who didn't write in or own one is disqualified to trust yours.

Not sure what knowing who the owner is has to do with anything, or why you are worried over a post that is months old that can be backed with testimony from numerous sources at the time that post was made.

Yup, exactly why I won't buy one.

seems like they've fixed that spring issue a while back and even have a video on their home page about it now:

 

[Ravenworks]

I do not own one, did not write them. If that is the standard to have knowledge of product & customer service issues then listening to your post is useless as well, because everyone who didn't write in or own one is disqualified to trust yours.

Not sure what knowing who the owner is has to do with anything, or why you are worried over a post that is months old that can be backed with testimony from numerous sources at the time that post was made.

You know what I find appalling about people like you?
You try to make yourself relevant by running around the internet with no real abilities in life.
Your only true talent in life is to eat a pile of shit while trying to explain to your limited audience how good your pile of shit really is.

Dude, everything you posted is a pile of shit, are you a Vegan?

 

[flandersfields]

they're back again! https://www.rarebreedtriggers.com/product/frt-15-br/

 

[HolidayRider101]

Rare Breed Triggers, LLC et al v. Garland et al (6:21-cv-01245), Florida Middle District Court

Rare Breed Triggers, LLC et al v. Garland et al (6:21-cv-01245), Florida Middle District Court, Filed: 08/02/2021

www.pacermonitor.com

beware fellas. Rarebreed Triggers lawsuit

 

[flandersfields]

Rare Breed Triggers, LLC et al v. Garland et al (6:21-cv-01245), Florida Middle District Court

Rare Breed Triggers, LLC et al v. Garland et al (6:21-cv-01245), Florida Middle District Court, Filed: 08/02/2021

www.pacermonitor.com

beware fellas. Rarebreed Triggers lawsuit

oh wow, you got any additional info?

 

[ChrisAU]

Rare Breed Triggers, LLC et al v. Garland et al (6:21-cv-01245), Florida Middle District Court

Rare Breed Triggers, LLC et al v. Garland et al (6:21-cv-01245), Florida Middle District Court, Filed: 08/02/2021

www.pacermonitor.com

beware fellas. Rarebreed Triggers lawsuit

RB is the plaintiff though. They are suing the ATF.

 

[Lance Darkhorse]

Do you know if you can go to there place and buy one in person

 

[Swamplife]

 

[warnera1102]

Any idea when they restock these per week?

 

[Swamplife]

Any idea when they restock these per week?

They haven’t been in stock for weeks. You might not see them again until their legal matter is settled.

 

[warnera1102]

I ask because he said they are not stopping production.. so he said in a video last week.

 

[Swamplife]

I ask because he said they are not stopping production.. so he said in a video last week.

Just get on the waiting list, if you haven’t already