I have a customized Remington 5r 10th Anniversary Edition 308 that has been sitting in the safe way to long. Someone need to enjoy this rifle.
Remington 5r 10th Anniversary Edition 308. All work was done at GA PRECISION in KC by Flounder when he was there. I had it cut threaded and re-crowned to 22" as the plan was to shoot suppressed. Never ended up shooting it more than 100 rounds of Federal GGM.
$1,100 Shipped to your FFL. PP F&F Venmo or Zelle. I WILL ONLY SHIP TO AN FFL.
Stainless Steel
Full- Length Aluminum Bedding Block Kevlar Stock w/ Palm Swell
22" 11.25 twist Heavy-Contour Barrel (0.820" muzzle O.D.)- w/ Match Grade 5R Rifling
Kevlar Stock- with Full Length Aluminum Bedding Block for Maximum Accuracy
X-Mark Pro- Trigger System
Legendary Model 700� Action
Drilled and Tapped for Scope Mount
Caliber: .308 Winchester
22' 5/8x24 threaded with protector
Badger M5 Bottom Metal
Bolt Fluted by LRI
TPS 20 MOA Base
Badger Bolt Knob.
Built off the legendary 700 action, the Remington 700 5-R sets the benchmark for accuracy and durability. Much like M-24, the barrel is cold hammer forged and features 5-R rifling. The 5R rifling profile increases barrel life expectancy, accuracy and creates less fouling and bullet deformation over time. Whether you're a benchrest shooter or longtime hunter, look no further for better reliability and precision.
Why 5-R?
5-R rifling is the same type of rifling used on the battle proven M-24 SWS. There are 5 lands as opposed to the normal 6 land configuration. Traditional lands are squared off at a 90 degree angle to the groove while the lands on 5-R rifling are tapered at 110 degrees which results in less bullet deformation. Also, none of the lands are directly across from one another. Both of these features lead to better accuracy and less fouling.
Remington 5r 10th Anniversary Edition 308. All work was done at GA PRECISION in KC by Flounder when he was there. I had it cut threaded and re-crowned to 22" as the plan was to shoot suppressed. Never ended up shooting it more than 100 rounds of Federal GGM.
$1,100 Shipped to your FFL. PP F&F Venmo or Zelle. I WILL ONLY SHIP TO AN FFL.
Stainless Steel
Full- Length Aluminum Bedding Block Kevlar Stock w/ Palm Swell
22" 11.25 twist Heavy-Contour Barrel (0.820" muzzle O.D.)- w/ Match Grade 5R Rifling
Kevlar Stock- with Full Length Aluminum Bedding Block for Maximum Accuracy
X-Mark Pro- Trigger System
Legendary Model 700� Action
Drilled and Tapped for Scope Mount
Caliber: .308 Winchester
22' 5/8x24 threaded with protector
Badger M5 Bottom Metal
Bolt Fluted by LRI
TPS 20 MOA Base
Badger Bolt Knob.
Built off the legendary 700 action, the Remington 700 5-R sets the benchmark for accuracy and durability. Much like M-24, the barrel is cold hammer forged and features 5-R rifling. The 5R rifling profile increases barrel life expectancy, accuracy and creates less fouling and bullet deformation over time. Whether you're a benchrest shooter or longtime hunter, look no further for better reliability and precision.
Why 5-R?
5-R rifling is the same type of rifling used on the battle proven M-24 SWS. There are 5 lands as opposed to the normal 6 land configuration. Traditional lands are squared off at a 90 degree angle to the groove while the lands on 5-R rifling are tapered at 110 degrees which results in less bullet deformation. Also, none of the lands are directly across from one another. Both of these features lead to better accuracy and less fouling.
- Legendary Model 700 Stainless Steel Action featuring the "3-Rings of Steel" makes this the strongest action on the market
- 5-R hammer-forged barrel with rifling like that used in famous M-24 military rifles for the utmost in shot-to-shot consistency
- 5-R increases barrel life and accuracy, causes less friction and bullet deformation
- H.S. Precision composite stock features full-length aluminum bedding blocks for enhanced stability and shot-to-shot consistency
- Dual front swivel stud system for convenient mounting of bi-pod and sling
- X-Mark Pro externally adjustable trigger
CALIBER | MAG. CAPACITY | OVERALL LENGTH | AVG. WT. (LBS.) | BARREL LENGTH | BARREL MATERIAL | BARREL FINISH | STOCK MATERIAL | STOCK FINISH | TWIST RATE | LENGTH OF PULL | DROP (COMB) | DROP (HEEL) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
308 Win | 4 | 43-3/4" | 8.5 | 22" | Stainless Steel | Satin | H-S Precision Stock | H-S Precision Stock | 1:11-1/4 | 13-3/8" | 1-1/2" | 1-1/4" |
Attachments
-
5r1.jpg80.5 KB · Views: 351
-
5r2.jpg113.5 KB · Views: 353
-
5r3.jpg113.5 KB · Views: 311
-
5r4.jpg71 KB · Views: 296
-
5r5.jpg43.9 KB · Views: 323
-
5r6.jpg111 KB · Views: 304
-
5r7.jpg47.9 KB · Views: 315
-
5r8.jpg49.1 KB · Views: 297
-
5r9.jpg40.6 KB · Views: 335
-
5r10.jpg62.9 KB · Views: 329
-
5r11.jpg58.6 KB · Views: 304
-
5r12.jpg64.3 KB · Views: 257
-
5r13.jpg83.4 KB · Views: 351
Last edited: