would like to cut some length off of this barrel, the gun shoots great the way it is, standard 700 parkerized police, but its just too cumbersome. About how much am I looking at to have a smith cut this barrel down, and what crown should I be asking for when it's done. Hoping the rifle will continue to shoot as good as it does after the cut.
-
Having trouble using the site?
Contact support
Remington 700P 26" BBL
- Thread starter kmc0929
- Start date
Re: Remington 700P 26" BBL
I have seen this listed on many sites at around $110 dollars. I have the same gun and am having a local smith do mine . I just dropped it off Ftiday. He said $40 to cut and crown the barrel.
I have seen this listed on many sites at around $110 dollars. I have the same gun and am having a local smith do mine . I just dropped it off Ftiday. He said $40 to cut and crown the barrel.
Re: Remington 700P 26" BBL
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 0481</div><div class="ubbcode-body">Why not have the chamber recut and then cut to lenght </div></div>
Why would I need to do this, just curious not familiar with this. Like I said I just want the barrel to be shorter.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 0481</div><div class="ubbcode-body">Why not have the chamber recut and then cut to lenght </div></div>
Why would I need to do this, just curious not familiar with this. Like I said I just want the barrel to be shorter.
Re: Remington 700P 26" BBL
If it shoots great...don't break it. Vibrations can change. My 700P does 2 inches or less at 400. Wouldn't touch it for much money. JMHO
If it shoots great...don't break it. Vibrations can change. My 700P does 2 inches or less at 400. Wouldn't touch it for much money. JMHO
Re: Remington 700P 26" BBL
If you have loose chamber you can have it recut. Also if there is a bullet you like and so dose the rifle. It can be cut for a tight chamber. Put the bullet .010 off the lands and you should see an improvement in accuracy.
If you have loose chamber you can have it recut. Also if there is a bullet you like and so dose the rifle. It can be cut for a tight chamber. Put the bullet .010 off the lands and you should see an improvement in accuracy.
