I'm selling an amazing Remage 300WM to fund some night vision. No trades at this time but willing to part out. I am happy to share my load development. This is an easy 1/2 MOA gun (see photos, 100yds on paper vs 300yds on steel). I am shooting 225 Hornady ELDMs. I am looking for $4,800 as a complete package shipped to your FFL, or at the prices listed below plus shipping. For just the rifle with scope Id like to get $4,400.
RIFLE BARRELED ACTION - $1,500
-R700 Factory Barreled Action
-Bolt Fluted by Area 419
-Badger Bolt Knob installed by Area 419
-Triggertech Special set to about 3lbs
-Criterion 28" 300WM 1:10 Twist threaded 5/8x24 chambered by Northland Shooting Supply with a standard match recoil lug
-Nightforce 20 MOA Rail
-NO MUZZLE BREAK
STOCK - $900
-McMillan A3-5, Devcon bedded to R700
-Hawkins Precision Long Action CIP DBM, inletted by Northeast Gun Works
-x1 CIP Length Accurate Mag (3.850")
-SAP x2 round holder
-Weibad Cheek Rest
-NO BIPOD
SCOPE - $2,300
-Schmidt & Bender 5-25x56 PMII LP P4LF MRAD CCW
-Badger 34mm rings
-Vortex Lo Pro 34mm bubble level
-MK Machining throw lever
RELOADING - $500
-Whidden Bushing FL Sizer and Seater, with Micrometer seater
-Larry Willis Collet Belted Magnum Sizing Die
-106 pieces of Federal x2 fired brass, tumbled and primed with CCI 250 Magnum Primers
-55 x3 fired deprimed pieces of Federal Brass
-100+ pieces of Federal x3 fired brass, need to be deprimed
-99 Hornady 225gr ELDSMs (can confirm later today)
-109 rounds of loaded ammo with 225 ELDMs, x2 Federal fired brass, CCI 250 Magnum Primers, and 71.6gr H1000 (goes about 2900fps)
Shipping is from NH, so if you are local to me we can meet here.
RIFLE BARRELED ACTION - $1,500
-R700 Factory Barreled Action
-Bolt Fluted by Area 419
-Badger Bolt Knob installed by Area 419
-Triggertech Special set to about 3lbs
-Criterion 28" 300WM 1:10 Twist threaded 5/8x24 chambered by Northland Shooting Supply with a standard match recoil lug
-Nightforce 20 MOA Rail
-NO MUZZLE BREAK
STOCK - $900
-McMillan A3-5, Devcon bedded to R700
-Hawkins Precision Long Action CIP DBM, inletted by Northeast Gun Works
-x1 CIP Length Accurate Mag (3.850")
-SAP x2 round holder
-Weibad Cheek Rest
-NO BIPOD
SCOPE - $2,300
-Schmidt & Bender 5-25x56 PMII LP P4LF MRAD CCW
-Badger 34mm rings
-Vortex Lo Pro 34mm bubble level
-MK Machining throw lever
RELOADING - $500
-Whidden Bushing FL Sizer and Seater, with Micrometer seater
-Larry Willis Collet Belted Magnum Sizing Die
-106 pieces of Federal x2 fired brass, tumbled and primed with CCI 250 Magnum Primers
-55 x3 fired deprimed pieces of Federal Brass
-100+ pieces of Federal x3 fired brass, need to be deprimed
-99 Hornady 225gr ELDSMs (can confirm later today)
-109 rounds of loaded ammo with 225 ELDMs, x2 Federal fired brass, CCI 250 Magnum Primers, and 71.6gr H1000 (goes about 2900fps)
Shipping is from NH, so if you are local to me we can meet here.
Attachments
Last edited:
