New in box, unfired, 2A Armament Xanthos-Lite 6.5 Creedmoor rifle.
I purchased two Xanthos rifles for my collection and decided to keep the rifle chambered in .308. The fit, finish and machining of these rifles is well known in the firearms industry. The tolerances are so tight that even after both takedown pins are pulled the user must work to separate the receivers. This rifle has 2A's regulated BCG where user can regulate gas flow at the port door.
2A LOWER RECEIVER - CNC machined 7075-T6 billet with flared mag-well, rear tensioning screw, rear take down spring retainer, and screw in bolt catch pin.
2A UPPER RECEIVER - CNC machined 7075-T6 billet, "slick side" design, retained port door rod, M4 style feed ramps, machined T numbers in picatinny rail.
2A BOLT AND CARRIER (Full Mass) - 8620 machined body with QPQ process, 9310 machined bolt, cryogenically treated, MPT, QPQ process - regulated for user adjustment
2A HANDGUARD - Xanthos Lite 15" XSC, 6061 extrusions with aluminum barrel nut. M-LOK format.
2A BARREL -20" 2A contour lightweight 6.5 Creedmoor, 4150 gun barrel steel with QPQ Nitride, black oxide extension, rifle-length gas system, 6.5 Creedmoor SAAMI Chamber, 1 in 8 twist
2A GAS BLOCK - .750 dia titanium gas block.
2A MUZZLE DEVICE - 6.5 Creedmoor X4 Titanium muzzle brake
2A RECEIVER EXTENSION - Mil-spec, 8 position 6061-T6, standard H2 buffer.
Strike Industries charging handle.
STOCK/GRIP - MAGPUL MIAD Grip, Mission First MFT stock.
ALG Defense (ACT) single stage trigger
LOWER PARTS - Mil-spec safety, magazine catch, bolt catch, through drilled 2A titanium takedown pins.
Ships with one 20 round MAGPUL P-MAG
WEIGHT - 6.85 pounds
IM/email for any questions
$2,350
USPS money orders, certified check or discreet electronic payment accepted.
Partial/Full trades - Nightforce NX8 4-32x50 F1, .250 MOA, MOAR or Nightforce ATACR 7-35x56 F1, .250 MOA, MOAR
I purchased two Xanthos rifles for my collection and decided to keep the rifle chambered in .308. The fit, finish and machining of these rifles is well known in the firearms industry. The tolerances are so tight that even after both takedown pins are pulled the user must work to separate the receivers. This rifle has 2A's regulated BCG where user can regulate gas flow at the port door.
2A LOWER RECEIVER - CNC machined 7075-T6 billet with flared mag-well, rear tensioning screw, rear take down spring retainer, and screw in bolt catch pin.
2A UPPER RECEIVER - CNC machined 7075-T6 billet, "slick side" design, retained port door rod, M4 style feed ramps, machined T numbers in picatinny rail.
2A BOLT AND CARRIER (Full Mass) - 8620 machined body with QPQ process, 9310 machined bolt, cryogenically treated, MPT, QPQ process - regulated for user adjustment
2A HANDGUARD - Xanthos Lite 15" XSC, 6061 extrusions with aluminum barrel nut. M-LOK format.
2A BARREL -20" 2A contour lightweight 6.5 Creedmoor, 4150 gun barrel steel with QPQ Nitride, black oxide extension, rifle-length gas system, 6.5 Creedmoor SAAMI Chamber, 1 in 8 twist
2A GAS BLOCK - .750 dia titanium gas block.
2A MUZZLE DEVICE - 6.5 Creedmoor X4 Titanium muzzle brake
2A RECEIVER EXTENSION - Mil-spec, 8 position 6061-T6, standard H2 buffer.
Strike Industries charging handle.
STOCK/GRIP - MAGPUL MIAD Grip, Mission First MFT stock.
ALG Defense (ACT) single stage trigger
LOWER PARTS - Mil-spec safety, magazine catch, bolt catch, through drilled 2A titanium takedown pins.
Ships with one 20 round MAGPUL P-MAG
WEIGHT - 6.85 pounds
IM/email for any questions
$2,350
USPS money orders, certified check or discreet electronic payment accepted.
Partial/Full trades - Nightforce NX8 4-32x50 F1, .250 MOA, MOAR or Nightforce ATACR 7-35x56 F1, .250 MOA, MOAR
Last edited:
