Night Vision Replacement power cable for Pulsar Apex XD38 external battery

[st1650]

The cable included with my Pulsar is getting weak and sometimes loses power. From what I can tell, one end is a m12 8 pin female connector and then it's splitted for video (RCA) and power: 12vDC 5.5mm.

Is there anyone who sells replacement cables without split and the video out connector ? I only use it with the EPS3/5 rechargable li battery.

Looking for something similar to this (which is discontinued) but for power only:
https://www.ultimatenightvision.com/Dual-Video-Power-Cable-for-the-Pulsar-APEX-p/ucb-v8-da.htm

 

[JCCinOhio]

Do you know which end is causing the loss of power? Could always replace the 12v plug (as you have it labeled). Or, is it still under warranty, Pulsar's a great company to deal with.

My EPS5 battery's plug is shorting out as well.. so did some rigging, taped 2 nails along the plug and got a 90 degree elbow to reduce tension on it.

 

[st1650]

I believe my issue is with the wire itself because when I bend and tape it, it works fine. Haven't heard back from Pulsar yet ...

 

[Blylerhunter]

I believe my issue is with the wire itself because when I bend and tape it, it works fine. Haven't heard back from Pulsar yet ...

Did you ever get a reply? Looking at replacing my cord now too or upgrading battery packs.

 

[st1650]

Did you ever get a reply? Looking at replacing my cord now too or upgrading battery packs.

Nah I never got any help from pulsar. I think I made my own connector before I sold it 3 years ago. Sorry brother. Shouldn’t be that hard to fix if you know an electrician or someone who works in a spy store or similar to solder you a new cable.