Rimfire RimX 9 twist 22LR Bartlein barrel

Swaim13

Supporter
Supporter
Full Member
Minuteman
May 12, 2018
248
107
Peoples Republic of Maryland
Selling a 9 twist Bartlein barrel chambered for a RimX by Lee Gardner Precision. Barrel is finished at roughly 23 inches and is a Bartlein #7 MTU contour but 0.85 at 27 inches per the original invoice. Muzzle is threaded and has a blended thread protector. Barrel has approximately 1000 rounds down it. I have about 800 into this barrel. Barrel has sat for roughly a year so I am clearing out. Tried to capture any marks on it. Any additional questions, feel free to ask.

Photo is of my target where I was shooting 57 yard groups to adjust the ATS tuner and I am not the greatest at shooting groups. The barrel shot really well, but there was a lot of spin drift.

Yours for 350.
 

Attachments

  • PXL_20231102_220534822.jpg
    PXL_20231102_220534822.jpg
    461.9 KB · Views: 327
  • PXL_20231102_220641702.jpg
    PXL_20231102_220641702.jpg
    314.9 KB · Views: 334
  • PXL_20231102_220619752.jpg
    PXL_20231102_220619752.jpg
    540.9 KB · Views: 229
  • PXL_20231102_220544147.jpg
    PXL_20231102_220544147.jpg
    228 KB · Views: 226
  • PXL_20231102_220541344.jpg
    PXL_20231102_220541344.jpg
    400.5 KB · Views: 325
Last edited:
  • Like
Reactions: BigDaddy0381
Threads are 1/2-28. Reamer was the JGS Match by Lee Gardner.

The barrel liked Center X. If I remember correctly, it liked faster lots. I didn't try SK LRM in it (was easier to get CX at the time), but my guess is that it would like that as well. I don't think it liked Eley.